Abstract
In this manuscript the results of a study aimed at understanding the extrinsic influence of test specimen orientation, with respect to wrought alloy steel plate, on high cycle fatigue properties and fracture behavior is highlighted. The alloy steel chosen was 300 M. Samples of this alloy steel prepared from both the longitudinal and transverse orientation were cyclically deformed over a range of maximum stress and the corresponding number of cycles to failure (NF) was recorded. The influence of test specimen orientation and intrinsic microstructural effects on cyclic fatigue life is presented. At the chosen test temperature, the macroscopic fracture mode was essentially identical regardless of the orientation of the test specimen with respect to the wrought plate. The microscopic mechanisms governing cyclic deformation, fatigue life and final fracture behavior is presented in light of the mutually interactive influences of magnitude of applied stress, intrinsic microstructural effects, orientation of test specimen, and deformation characteristics of the constituents in the microstructure of this alloy steel.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Innovations in Ultrahigh Strength Steel Technology, Proceedings of the 34th Sagamore Army Materials Conference (editors: G.B. Olson, M. Azrin and E. S. Wright), U.S. Army Materials Technology Laboratory, Watertown, MA, 1990, pp. 3–65.
G.B. Olson, M. Azrin, E.S. Wright: Innovations in Ultrahigh Strength Steel Technology (editors), U.S. Army Materials Technology Laboratory, Watertown, MA, 1990, pp. 89–109.
G. R. Speich, D.S. Dabkowski, L. F. Porter: Metallurgical Transactions, Vol., 4, 1973, pp. 303–315.
Thomas, G., Schmatz, D. and Gerberich, W.: “Structure and Strength of Some Ausformed Steels”, In ‘High Strength materials’ (Editor. V.F. Zackey), John Wiley and Sons, New York, NY, 1965, pp. 251–326
Baker, A. J., Laura E. J., and Wei, R. P., “Relationships Between Microstructure and Toughness in Quenched and Tempered Ultrahigh-Strength Steels,” Structure and Properties of Ultrahigh Strength Steels, STP 370, ASTM, Philadelphia, PA, 1965, pp. 3–30.
D. Huang and G. Thomas: “Factors Influencing Strength and Toughness in High Strength Low Alloy Steels,” Metallurgical Transactions, 1972, Vol. 2, p. 1587
Honeycombe R.W.K, Harding H.J and Irani J.J.: “Strengthening mechanism in Ferritic and Austenitic Steels “, In ‘High Strength Materials’ (Editor: V.F. Zackey), John Wiley and Sons, New York, NY, 1965, pp. 213–250.
Baker, AJ., Laura, F.D., and Wei, R.P., “Structure and Properties of Ultra High Strength Steels” ASTM STP 370, 1965, p 3.
G.E. Pellissier, “Effects of microstructure on the fracture toughness of ultrahigh-strength steels”, Engineering Fracture Mechanics, Volume 1, Issue 1, June 1968, Pages 55–60.
Y. Tomita, Materials Science and Technology, Vol. 7, 1991m, pp. 481–490
Y. Tomitya and T. Okawa: “Effect of microstructure on mechanical properties of isothermally bainite transformed 300M steel”, Materials Science and Engineering, Vol. 72, 1993, pp. 145–152.
E.W. Lee, C.E. Neu and J. Kozol: Journal of Metals, Vol. 42 (5), 1990, pp. 11–14.
D.Y. Wei, J.L. Gu, H.S. Fang, B.Z. Bai and Z.G. Yang: “Fatigue behavior of 1500 Mpa bainite/martensite duplex-phase high strength steel”, International Journal of Fatigue, Vol. 26, 2004, pp. 437–442.
Darius Rozumek: “Influence of the slot inclination angle in FeP0 4 steel on fatigue crack growth under tension”, Materials and Design, Vol. 30, 2009, pp. 1859–1865.
Y. Furuya, S. Torizuka, E. Takeuchi, M. Bacher Hochst and M. Kuntz: “Ultrasonic fatigue testing on notched and smooth specimens of ultrafine-grained steel” Materials and Design, Vol. 37, 2012, pp. 515–520.
R. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, Second Edition, John Wiley and Sons, 1983.
D. Thomas, D. Schmatz and W.W. Gerberich: in High Strength Materials (Edited by: V.F. Zackay) John Wiley and Sons, New York, USA, 1965, pp. 199–209
W.M. Garrison, Jr., and N.R. Moody: “The Influence of Inclusion Spacing and Microstructure on the Fracture Toughness of the Secondary Hardening Steel AF 1410”, Metallurgical Transactions, 1987, Vol. 18A, pp. 1257–1263.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Manigandan, K., Srivatsan, T.S., Doll, G., Quick, T. (2014). The Stress Controlled Cyclic Fatigue and Fracture Behavior of Alloy Steel 300M. In: Srivatsan, T.S., Imam, M.A., Srinivasan, R. (eds) Fatigue of Materials III. Springer, Cham. https://doi.org/10.1007/978-3-319-48240-8_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-48240-8_13
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48597-3
Online ISBN: 978-3-319-48240-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)