Abstract
Three-dimensional X-ray tomography (XRT) provides a non-destructive technique to determine the location, size, and shape of spall damage within shock loaded metals. Polycrystalline copper samples of varying thermomechanical histories were shocked via plate impacts at low pressures to ensure incipient spall conditions. Additionally, samples of similar heat-treated microstructures were impacted at various loading rates. All 3D XRT volumetric void data underwent smoothing, thresholding, and volumetric sieves. The full inertia tensor was found for each void, which was used to create best fit ellipsoids correlating shape to damage modes. Density distributions were plotted for the best-fit ellipsoid semi-axes aspect ratios alc and blc, where, a≤b≤c. It was found that >60% of voids in heat-treated samples resembled transgranular damage, whereas >70% of voids in the rolled sample resembled intergranular damage. Preliminary analysis also clearly indicates an increase of void coalescence with decreasing tensile loading stress rates for impacted samples of similar microstructures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
D.R Curran, L. Seaman, D.A. Shockey, “Dynamic Failure of Solids,” Physics Reports, 147 (5 & 6) (1987), 253–388.
D.E. Grady, “The Spall Strength of Condensed Matter,” Journal of the Mechanics and Physics of Solids, 36 (3) (1988), 353–384.
M.A. Meyers, Dynamic Behavior of Materials (John Wiley & Sons, New York, 1994).
R.W. Mnich et al., “Effect of Microstructural Length Scales on Spall Behavior of Copper,” Metallurgical and Materials Transactions A, 35 (A) (2004), 2263–2673.
B.L. Henrie et al., “Investigating Inciepiently Spalled Tantalum through Multiple Planes and Serial Sectioning,” AIP Conference Proceedings, 845 (2005), 627.
Czarnota et al., “Modelling of Dynamic Ductile Fracture and Application to the Simulation of Plate Impact Tests on Tantalum,” Journal of the Mechanics and Physics of Solids, 56 (2008), 1624–1650.
P. Peralta et al., “Characterization of Incipient Spall Damage in Dhocked Copper Multicrystals,” International Journal of Damage Mechanics, 18 (2009), 393–413.
L. Wayne et al., “Statistics of Weak Grain Boundaries for Spall Damage in Polycrystalline Copper,” Scripta Materialia, 63 (2010), 1065–1068.
J.P. Escobedo-Diaz, “Effects of Grain Size and Boundary Structure on the Dynamic Tensile Response of Copper,” Journal of Applied Physics, 110 (2011), 033513.
E.K Cerreta et al., “Early Stage Dynamic Damage and the Role of Grain Boundary Type,” Scripta Materialia, 66 (2012), 638–641.
J.P. Escobedo, E.K. Cerreta, D Dennis-Koller, “Effect of Crystalline Structure on Intergranular Failure during Shock Loading,” JOM, 66 (1) (2014), 156–164.
A.D. Brown et al., “3-D Characterization of Global and Local Mcrostructural Effects on Spall Damage in Shock Loaded FCC Metals: Experimental and Modeling,” ASME Int., Mechanics of Solids, Structures and Fluids, IMECE2013–65642 (2013), V009T10A033.
A.D. Brown et al., “Microstructural Effects on Damage Nucleation in Shock-Loaded Polycrystalline Copper,” Metallurgical and Materials Transactions A, 46 (10) (2015), 4539–4547.
K. Krishnan et al., “Three-Dimensional Characterization and Modeling of Mcrostructural Weak Links for Spall Damage in FCC Metals,” Metallurgical and Materials Transactions A, 46 (10), 4527–4538.
S.J. Fensin et al., “Effect of Loading Direction on Grain Boundary Failure Under Shock Loading,” Acta Materialia, 64 (2014), 113–122.
J.P. Escobedo et al., “Influence of Shock Loading Kinetics on the Spall Response of Copper,” Journal of Physics: Conference Series, 500 (11) (2014).
W. Han et al., “Deformation and Spallation of Shocked Cu Bicrystals with ∑3 Coherent and Symmetric Incoherent Twin Boundaries,” Physical Review B, 85 (2012), 024107.
E.Q. Lin et al., “Shock Response of Copper Bicrystals with a ∑3 Axisymmetric Tilt Grain Boundary,” Computational materials Science, 59 (2012), 94–100.
B.M. Patterson et al., “Dimensional Quantification of Embedded Voids or Objects in Three Dimensions using X-ray Tomography,” Microscopy and Microanalysis, 18 (2012), 390–398.
L. Wang, Y.J. Park, Y. Fu, “Representation of Real Particles for DEM Simulation using X-ray Tomography,” Construction and Building Materials, 21 (2007), 338–346.
Avizo® 8 Reference Guide (2013).
A.L. Stevens, L. Davison, W.E. Warren, “Spall Fracture in Aluminum Monocrystals: A Dislocation Dynamics Approach,” Journal of Applied Physics, 43 (1972), 4922–4927.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Brown, A.D. et al. (2016). Methodology for Determining Spall Damage Mode Preference in Shocked FCC Polycrystalline Metals from 3D X-Ray Tomography Data. In: Ikhmayies, S.J., et al. Characterization of Minerals, Metals, and Materials 2016. Springer, Cham. https://doi.org/10.1007/978-3-319-48210-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-48210-1_7
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48623-9
Online ISBN: 978-3-319-48210-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)