Abstract
Cerium-based conversion coatings (CeCCs) were deposited onto AZ31B magnesium alloy substrates using a spontaneous reaction of CeCl3, H2O2 and gelatin in a water-based solution. The coating thickness was adjusted by controlling the immersion time in the deposition solution. Prior to deposition, the AZ31B substrates were treated using an acid pickling in nitric acid and then an alkaline cleaning in sodium metasilicate pentahydrate. After deposition, the coated samples were immersed in a phosphate bath that converted cerium oxide/hydroxide into cerium phosphate. Electrochemical impedance spectroscopy, potentiodynamic polarization and neutral salt spray testing studies indicated that ~100 nm thick CeCC had better corrosion performance than ~400 nm coatings. Characterization of the CeCCs by transmission electron microscopy (TEM) revealed a three layer structure with different compositions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Friedrich H. E. Mordike B.L. Magnesium Technology: Metallurgy, Design data, Applications. Springer — Verlag Berlin Heidelberg (2006).
M. K. Kulekci, “Magnesium and its Alloys Applications in Automotive Industry,” The International Journal of Advanced Manufacturing Technology. 39 (9–10) 851–865 (2008).
G. L. Song, A. Atrens, “Corrosion Mechanisms of Magnesium Alloys,” Advanced Engineering Materials, 1(1) 11–33(1999).
G. L. Song, A. Atrens, “Understanding Magnesium Corrosion: a Framework for Improved Alloy Performance,” Advanced Engineering Materials, 5(12) 837–858 (2003).
E. Ghali, W. Dietzel and K. U. Kainer, “General and Localized Corrosion of Magnesium Alloys: A Critical Review,” Journal of Materials Engineering and Performance, 13, 7–23 (2004).
M. Maryaet al., “Microstructural Effects of AZ31 Magnesium Alloy on its Tensile Deformation and Failure Behaviors,” Materials Science and Engineering A, 418, 341–356 (2006).
M. Dabalà, K. Brunelli, E. Napolitani, M. Magrini. “Cerium-based Chemical Conversion Coatings on AZ63 Magnesium Alloy.” Surface and Coatings Technology, 172 227–232 (2003).
S. Maddela, M. J. O’Keefe, Y. -M. Wang, H. -H. Kuo. “Influence of Surface Pretreatment on Coating Morphology and Corrosion Performance of Cerium-Based Conversion Coatings on AZ91 D Alloy.” Corrosion, 66 (11) 115006–1/115006–8(2010).
K. Brunelli, M. Dabalà, I. Calliari, M. Magrini. “Effect of HCl Pre-treatment on Corrosion Resistance of Cerium-based Conversion Coatings on Magnesium and Magnesium alloys.” Corrosion Science, 47(4) 989–1000 (2005).
A. L. Rudd, C. B. Breslin, F. Mansfeld. “The Corrosion Protection Afferded by Rare Earth Conversion Coatings Applied to Magnesium.” Corrosion Science, 42 275–288 (2000).
D. K. Heller, W. G. Fahrenholtz, M. J. O’Keefe, “The Effect of Post-treatment Time and Temperature on Cerium-based Conversion Coatings on Al 2024-T3,” Corrosion Science, 52(2) 360–368 (2010).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Castano, C.E., Maddela, S., O’Keefe, M.J., Wang, YM. (2012). Effect of Thickness on the Morphology and Corrosion Behavior of Cerium-Based Conversion Coatings on AZ31B Magnesium Alloy. In: Mathaudhu, S.N., Sillekens, W.H., Neelameggham, N.R., Hort, N. (eds) Magnesium Technology 2012. Springer, Cham. https://doi.org/10.1007/978-3-319-48203-3_46
Download citation
DOI: https://doi.org/10.1007/978-3-319-48203-3_46
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48571-3
Online ISBN: 978-3-319-48203-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)