Abstract
A constrained chip formation technique, large strain extrusion machining (LSEM), was used to produce bulk magnesium alloy (AZ31B) strips with fine grain size (2–6 μm) and non-basal textures. These characteristics are known to enhance the final formability. The deformation temperature during extrusion-machining was varied by preheating the workpiece to a range of temperatures (50°C to 375°C). Microstructural refinement and texture evolution were studied as function of deformation temperature. It was possible to refine the grain size down to ∼2 μm by restricting the dynamic grain growth at low to moderate deformation temperatures (below 320°C). LSEM was shown to be capable of resulting in non-basal textures at low deformation temperatures (below 220°C) as well as at elevated deformation temperatures (above 420°C). The influence of active deformation mechanisms and dynamic recrystallization on the texture development is also addressed.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
I.J. Polmear, “Magnesium Alloys and Applications”, Materials Science and Technology, 10 (1994), 1–16.
T. Mukai, M. Yamanoi, H. Watanabe, and K Higashi, “Ductility Enhancement in AZ31 Magnesium Alloy by Controlling its Grain Structure”, Scripta Materialia, 45 (2001), 89–94.
Satyam Suwas, G. Gottstein, and R. Kumar, “Evolution of Crystallographic Texture during Equal Channel Angular Extrusion (ECAE) and its Effects on Secondary Processing of Magnesium”, Materials Science and Engineering A, 471 (2007), 1–14.
Edward F. Emley, Principles of Magnesium Technology (Oxford, New York, Pergamon Press, 1966).
L. Jin, D. Lin, D. Mao, X. Zeng, and W. Ding, “Mechanical Properties and Microstructure of AZ31 Mg Alloy Processed by Two-step Equal Angular Channel Extrusion”, Materials Letters, 59 (2005), 2267–2270.
W. Moscoso, M.R. Shankar, J.B. Mann, W.D. Compton, S. Chandrasekar, “Bulk Nanostructured Materials by Large Strain Extrusion Machining”, Journal of Materials Research, 22 (2007), 201–205.
J.H. Wiener, “Shear-plane Temperature Distribution in Orthogonal Cutting”, Transactions of the American Society of Mechanical Engineers, 77 (1955), 1331–1341.
L. Lutterotti, M. Bortolotti, G. Ischia, I. Lonardelli, and H.R. Wenk, “Rietveld Texture analysis from Diffraction Images”, Zeitschrift für Kristallographie Supplements, 26 (2007), 125–130.
E.O. Hall, “The Deformation and Ageing of Mild Steel: II Characteristics of Lüders Bands”, Proceedings of the Physical Society B, 64 (1951), 742–747.
W.J. Kim, Y.K. Sa, “Micro-extrusion of ECAP Processed Magnesium Alloy for Production of High Strength Magnesium Micro-gears”, Scripta Materialia, 54 (2006) 1391–1395.
M. Sevier, H.T.Y. Yang, W. Moscoso, and S. Chandrasekar, “Analysis of Severe Plastic Deformation by Large Strain Extrusion Machining”, Metallurgical and Materials Transactions A, 39A (2008), 2645–2655.
S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, and P.K. Liaw, “Texture Evolution of Five Wrought Magnesium Alloys during Route A Equal Channel Angular Extrusion: Experiments and Simulations”, Acta Materialia, 53 (2005), 3135–3146.
D. Sagapuram, M. Efe, W. Moscoso, S. Chandrasekar, and K.P. Trumble, “Deformation Temperature Effects on Microstructure and Texture Evolution in High Strain Rate Extrusion-Machining of Mg-AZ31B”, Proceedings of the 16 th International Conference on Texture of Materials, Bombay, India, Dec, 2011.
Y.N. Wang, and J.C. Huang, “Texture Analysis in Hexagonal Materials”, Materials Chemistry and Physics, 81 (2003), 11–26.
S.E. Ion, F.J. Humphreys, and S.H. White, “Dynamic Recrystallization and Development of Microstructure during the High Temperature Deformation of Magnesium”, Acta Metallurgica, 30 (1982), 1909–1919.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Sagapuram, D., Efe, M., Moscoso, W., Chandrasekar, S., Trumble, K.P. (2012). Non-Basal Textures in Magnesium Alloy Strips Produced by Extrusion-Machining. In: Mathaudhu, S.N., Sillekens, W.H., Neelameggham, N.R., Hort, N. (eds) Magnesium Technology 2012. Springer, Cham. https://doi.org/10.1007/978-3-319-48203-3_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-48203-3_23
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48571-3
Online ISBN: 978-3-319-48203-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)