Abstract
Stainless steel 440C with high content of C and Cr is the desired candidate in many engineering component for bearing purpose due to the extremely high yield strength and resistance to corrosion and erosion. However, high content of C and Cr usually results in carbides precipitates during cooling process. In this work, deformation mechanisms and the interplay between martensitic matrix and carbides precipices are explored using crystal plasticity finite element method (CPFEM). Two deformation stages are clearly revealed correlated to the yielding of matrix and precipitate respectively. When the “softer” phase, matrix is approaching the yielding point, lattice strains of matrix cease increasing and experience the stable stage, while precipitates carry more stresses. When sample is further deformed and precipitates are yielding, lattice strains in matrix exhibit elastic relaxation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Y.L. Lin, C.C. Lin, T.H. T., and H.J. Lai, “Microstructure and Mechanical Properties of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments,” Materials and Manufacturing Processes, 25 (2010) 246–248.
S.Y. Huang, Y.F. Gao, K. An, L.L. Zheng, W. Wu, Z.K. Teng, P.K. Liaw, “Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures,” Acta Materialia, 83 (2015) 137–148.
H.L. Jia, L.L. Zheng, W.D. Li, N. Li, J.W. Qiao, G.Y. Wang, Y. Ren, P.K. Liaw, and Y.F. Gao, “Insights from the Lattice-Strain Evolution on Deformation Mechanisms in Metallic-Glass-Matrix Composites,” Metallurgical and Materials Transactions A, accepted, 2015.
L. L. Zheng, “Micromechanical Studies of Intergranular Strain and Lattice Misorientation Fields and Comparisons to Advanced Diffraction Measurements,” Ph.D. thesis, University of Tennessee, Knoxville, TN.
L.L. Zheng, Y.F. Gao, S.Y. Lee, R.I. Barabash, J.H. Lee, P.K. Liaw, “Intergranular strain evolution near fatigue crack tips in polycrystalline metals,” Journal of the Mechanics and Physics of Solids, 59(2011) 2307–2322.
L.L. Zheng, Y.F. Gao, Y.D. Wang, A.D. Stoica, K. An, and X.L. Wang, “Grain orientation dependence of lattice strains and intergranular damage rates in polycrystals under cyclic loading,” Scripta Materialia, 68 (2013) 265–268.
L.L. Zheng, Y. Wei, and H. Badarinarayan, “Crystal Plasticity and Grain-Orientation-Dependent hkl-Lattice Strain in Polycrystalline SUS316,” TMS 2014 Annual Meeting Supplemental Proceedings, 173–180.
S.L. Wong, P.R. Dawson, “Influence of directional strength-to-stiffness on the elastic-plastic transition of fcc polycrystals under uniaxial tensile loading,” Acta Materialia, 58 (2010) 1658–1678.
Y.G. Huang, “A User-Material Subroutine Incorporating Single Crystal Plasticity in the ABAQUS Finite Element Program,” Division of Engineering and Applied Science, Harvard University, Cambridge, MA, Mechanics Report No. 179.
L.L. Zheng, W. Wu, K. An, Y. Wei, and H. Badarinarayan, work in preparation.
J.R. Cahoon, W. Broughton, A.R. Kutzak. “The Determination of Yield Strength from Hardness Measurements,” Metallurgical Transactions, 2 (1971):1979–1983.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 TMS (The Minerals, Metals & Materials Society)
About this paper
Cite this paper
Zheng, L., Yuan, W., Badarinarayan, H. (2015). Load Partitioning Mechanisms in Stainless Steel 440C by Crystal Plasticity Based Micromechanical Modeling Approach. In: Poole, W., et al. Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME 2015). Springer, Cham. https://doi.org/10.1007/978-3-319-48170-8_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-48170-8_15
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48612-3
Online ISBN: 978-3-319-48170-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)