Abstract
The US Environmental Protection Agency (EPA) and the US Aluminum Association sponsored measurements of two perfluorocarbon (PFC) gases: tetrafluoromethane and hexafluoroethane. The measurements at six primary aluminum production facilities provided data on emissions of these compounds during normal aluminum smelting operations. The measurements were made using process mass spectrometry, a technique capable of monitoring the rate of emissions with a time resolution of seconds. The PFC concentration measurements were combined with smelting process data collected during the measurements to provide new insights into the relationships between the process variables and PFC emissions. Detailed data were obtained at several locations relating overall cell voltage and PFC emission rates. The profiles of PFC emissions and voltage at a time resolution of seconds provide valuable insight into how emissions vary with voltage. The data on emission rates from commercial cells as a function of cell voltage were compared with similar data developed on bench scale experiments. Other analyses included a comparison of emission rates among different cell technologies and anode effect (AE) kill strategies. Estimated PFC emissions for different definitions of AE were compared with total measured PFC emissions. Finally, the emission rate as a function of AE duration was examined.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
R.A. Roberts and P.J. Ramsey, “Evaluation of Fluorocarbon Emissions from the Aluminum Smelting Process,” Light Metals 1994, 381–388.
A.T. Tabereaux, N.E. Richards and CE. Satchel, “Composition of Reduction Cell Anode Gas During Normal Conditions and Anode Effects,” Light Metals 1995, 325–333.
A. Oygard, T.A. Halvorsen and J. Thonstad, “A Parameter Study of the Formation of C-F Gases During Anode Effect in Aluminium Reduction Cells,” Light Metals 1995, 279–287.
Eric Dolin, “PFC Emissions Reductions: The Domestic and International Perspective,” Light Metal Age, (2) (1999), 56–67.
Jerry Marks, Ruth Roberts, Vikram Bakshi, and Eric Dolin, “Perfluorocarbon (PFC) Generation during Primary Aluminum Production,” Light Metals 2000, 365 – 371.
Intergovernmental Panel on Climate Change (IPCC), “Good Practice in Inventory Preparation for Industrial Processes and the New Gases,” (IPCC National Greenhouse Gas Inventories Program Technical Support Unit, Kanagawa, Japan, 2000).
Steen Nissen and Donald Sadoway, “Perfluorocarbon (PFC) Generation in Laboratory-Scale Aluminium Reduction Cells,” Light Metals 1997, pp 159–164.
Hongmin Zhu and Donald Sadoway, “The Electrode Kinetics of Perfluorocarbon (PFC) Generation,” Light Metals 1999, 241–246.
Hongmin Zhu and Donald Sadoway, “An Electroanalytical Study Of Electrode Reactions On Carbon Anodes During Electrolytic Production Of Aluminum,” Light Metals 2000, 257–263.
G. Bouzat, JC Carraz, and M. Meyer, “Measurements of CF4 and C2F6 Emissions from Prebaked Pots,” Light Metals 1996, 413–417.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Marks, J., Tabereaux, A., Pape, D., Bakshi, V., Dolin, E.J. (2016). Factors Affecting PFC Emissions from Commercial Aluminum Reduction Cells. In: Bearne, G., Dupuis, M., Tarcy, G. (eds) Essential Readings in Light Metals. Springer, Cham. https://doi.org/10.1007/978-3-319-48156-2_151
Download citation
DOI: https://doi.org/10.1007/978-3-319-48156-2_151
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48155-5
Online ISBN: 978-3-319-48156-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)