Abstract
The measurement of melt quality of aluminum alloys have been a complex phenomenon. There exists various methods but the general experience show that they were slow, complicated or expensive for use on the foundry floor. In addition, these methods were not quantifiable. For the first time, bifilm index was proposed by the authors which give a numerical indication of the melt quality in millimeters as the total oxide length. Numerous studies were carried out to correlate this index with the mechanical properties. In this work, toughness measurements were made by using MatLab software. Alloy studied was 356 which were cast under various conditions (degassed and upgassed for 0.1, 0.2 and 0.4 cm3/100g Al) and the results were correlated with bifilm index.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Caceres, C.H. and J.R. Griffiths, Damage by the cracking of silicon particles in an Al-7Si-0.4Mg casting alloy. Acta Materialia, 1996. 44(1): p. 25–33.
Tiryakioglu, M., J. Campbell, and N. Alexopoulos, On the Ductility ofCastAl-7Pct Si-Mg Alloys. Metallurgical and Materials Transactions A, 2009. 40(4): p. 1000–1007.
Tiryakioglu, M., J. Campbell, and N. Alexopoulos, Quality Indices for Aluminum Alloy Castings: A Critical Review. Metallurgical and Materials Transactions B, 2009. 40(6): p. 802–811.
Tiryakioglu, M., J. Campbell, and N.D. Alexopoulos, On the ductility potential of cast Al-Cu-Mg (206) alloys. Materials Science and Engineering: A, 2009. 506(1–2): p. 23–26.
Campbell, J., Castings. 2nd ed. 2003: Buttonworths.
Campbell, J., An overview of the effects ofbifilms on the structure and properties of cast alloys. Metallurgical and Materials Transactions B, 2006. 37(6): p. 857–863.
Dai, X., et al., Influence of oxide film defects generated infilling on mechanical strength of aluminium alloy castings. Materials Science and Technology, 2004. 20: p. 505–513.
Dispinar, D., et al., Degassing, hydrogen and porosity phenomena in A356. Materials Science and Engineering: A, 2010. 527(16–17): p. 3719–3725.
Green, N.R. and J. Campbell, Influence of oxide film filling defects on the strength of Al-7Si-Mg alloy castings. AFS Transactions, 1994. 102: p. 341–347.
Mi, J., R.A. Harding, and J. Campbell, Effects of the entrained surface film on the reliability of castings. Metallurgical and Materials Transactions A, 2004. 35(9): p. 2893–2902.
Nyahumwa, C, N.R. Green, and J. Campbell, Effect of mold filling turbulence on fatigue properties of cast aluminum alloys. AFS Transactions, 1998. 106: p. 215–224.
Nyahumwa, C, N.R. Green, and J. Campbell, The concept of the fatigue potential of cast alloys. Journal of Mechanical Behaviour of Metals, 1998. 9(2): p. 227–235.
Rezvani, M., X. Yang, and J. Campbell, Effect ofingate design on strength and reliability of Al castings. Transactions of the American Foundrymen’s Society, Vol 107, 1999. 107: p. 181–188
Runyoro, J. J., S.M.A. Boutarabi, and J. Campbell, Critical gate velocities for film-forming casting alloys: a basis for process specification. AFS Transactions, 1992. 100: p. 225–234.
Yang, X. and J. Campbell, Pouring basin desgin. International Journal of Cast Metals Research, 1998. 10(5): p. 239–299.
Dispinar, D. and J. Campbell, Critical assessment of reduced pressure test. Part 2: Quantification. International Journal of Cast Metals Research, 2004. 17(5): p. 287–294.
Dispinar, D. and J. Campbell, Critical assessment of reduced pressure test. Part 1: Porosity phenomena. International Journal of Cast Metals Research, 2004. 17(5): p. 280–286.
Dispinar, D. and J. Campbell, Effect of casting conditions on aluminium metal quality. Journal of Materials Processing Technology, 2007. 182(1–3): p. 405–410.
Dispinar, D. and J. Campbell, Porosity, hydrogen and bifilm content in Al alloy castings. Materials Science and Engineering: A, 2011. 528(10–11): p. 3860–3865.
Liu, L. and F.H. Samuel, Effect of inclusions on the tensile properties of Al—7% Si— 0.35% Mg (A356.2) aluminium casting alloy. Journal of Materials Science, 1998. 33(9): p. 2269–2281.
Tiryakioglu, M., J.T. Staley, and J. Campbell, Evaluating structural integrity of cast Al-7%Si-Mg alloys via work hardening characteristics: II. A new quality index. Materials Science and Engineering: A, 2004. 368(1–2): p. 231–238.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Dispinar, D., Kahruman, C., Campbell, J. (2014). Correlation between Bifilm Index and Toughness of Aluminum Alloys. In: Tiryakioğlu, M., Campbell, J., Byczynski, G. (eds) Shape Casting: 5th International Symposium 2014. Springer, Cham. https://doi.org/10.1007/978-3-319-48130-2_21
Download citation
DOI: https://doi.org/10.1007/978-3-319-48130-2_21
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48594-2
Online ISBN: 978-3-319-48130-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)