Abstract
In previous chapters, different optical sensing mechanisms have been discussed. The characteristics of the different types of OFSs have been presented and compared. Although different types and characteristics have been shown, all those sensing techniques were fabricated using silica optical fibers. In this chapter, an alternative line of optical fiber sensors is introduced. Those sensors are fabricated using polymer (in other words plastic). The chapter discusses this type of polymer-based OFSs, elaborating on the different sensing techniques and wide range of applications. More importantly, this type of OFSs is compared to the more commonly used Silica based OFSs. The chapter provides an introduction to polymer optical fibers and their use in sensing. The characteristics of POFs are then discussed, highlighting their advantages and limitations. The different techniques used for sensing in POFs are then presented, with demonstration of their most potential applications and the motivation behind using this alternative type of OFSs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Peters, Kara. “Polymer optical fiber sensors—a review.” Smart materials and structures 20.1 (2010): 013002.
Ohtsuka, Yasuji, Eisuke Nihei, and Yasuhiro Koike. “Graded-index optical fibers of methyl methacrylate-vinyl benzoate copolymer with low loss and high bandwidth.” Applied physics letters 57.2 (1990): 120-122.
Zubia, Joseba, and Jon Arrue. “Plastic optical fibers: An introduction to their technological processes and applications.” Optical Fiber Technology 7.2 (2001): 101-140.
Leitão, Cátia Sofia Jorge, et al. “Plastic optical fiber sensor for noninvasive arterial pulse waveform monitoring.” IEEE Sensors Journal 15.1 (2015): 14-18.
Bilro, Lúcia, et al. “Gait monitoring with a wearable plastic optical sensor.” Sensors, 2008 IEEE. IEEE, 2008.
Costa Antunes, Paulo, et al. “Dynamic structural health monitoring of a civil engineering structure with a POF accelerometer.” Sensor Review 34.1 (2014): 36-41.
Antunes, Paulo, et al. “Liquid level gauge based in plastic optical fiber.” Measurement 66 (2015): 238-243.
Bilro, Lúcia, et al. “Optical sensors based on plastic fibers.” Sensors 12.9 (2012): 12184-12207.
Ziemann, Olaf, et al. “POF handbook.” Springer (2008).
Peters, Kara. “4 Polymer Optical Fiber Sensors.” Optical Fiber Sensors: Advanced Techniques and Applications 36 (2015): 79.
Ziemann, Olaf, et al. POF-polymer optical fibers for data communication. Springer Science & Business Media, 2013.
Jasim, Ali Abdulhadi, et al. “Refractive index and strain sensing using inline Mach–Zehnder interferometer comprising perfluorinated graded-index plastic optical fiber.” Sensors and Actuators A: Physical 219 (2014): 94-99.
Bunge, Christian-A., et al. “Dopant-free fabrication process for graded-index polymer optical fiber solely based on temperature treatment.” 2015 17th International Conference on Transparent Optical Networks (ICTON). IEEE, 2015.
Van Eijkelenborg, Martijn A., et al. “Microstructured polymer optical fibre. “Optics express 9.7 (2001): 319-327.
Yang, D. X., et al. “Structural and mechanical properties of polymeric optical fiber.” Materials Science and Engineering: A 364.1 (2004): 256-259.
Silva-López, Manuel, et al. “Strain and temperature sensitivity of a single-mode polymer optical fiber.” Optics Letters 30.23 (2005): 3129-3131.
Zhang, Wei, David J. Webb, and G-D. Peng. “Investigation into time response of polymer fiber Bragg grating based humidity sensors.” Journal of lightwave technology 30.8 (2012): 1090-1096.
Zhang, Wei, and David J. Webb. “Humidity responsivity of poly (methyl methacrylate)-based optical fiber Bragg grating sensors.” Optics letters 39.10 (2014): 3026-3029.
Batumalay, Malathy, et al. “A study of relative humidity fiber-optic sensors.” IEEE Sensors Journal 15.3 (2015): 1945-1950.
Antunes, Paulo Fernando Costa, Humberto Varum, and Paulo S. Andre. “Intensity-encoded polymer optical fiber accelerometer.” IEEE Sensors Journal 13.5 (2013): 1716-1720.
André, P. S., et al. “Monitoring of the concrete curing process using plastic optical fibers.” Measurement 45.3 (2012): 556-560.
Takeda, Nobuo. “Characterization of microscopic damage in composite laminates and real-time monitoring by embedded optical fiber sensors.” International Journal of Fatigue 24.2 (2002): 281-289.
Chen, Tao, et al. “Crack detection and monitoring in viscoelastic solids using polymer optical fiber sensors.” Review of Scientific Instruments 87.3 (2016): 035005.
Kuang, K. S. C., et al. “Plastic optical fibre sensors for structural health monitoring: a review of recent progress.” Journal of Sensors 2009 (2009).
Moraleda, Alberto Tapetado, et al. “A temperature sensor based on a polymer optical fiber macro-bend.” Sensors 13.10 (2013): 13076-13089.
Teng, Chuan-xin, Ning Jing, and Jie Zheng. “The influence of temperature to a refractive index sensor based on a macro-bending tapered plastic optical fiber.” Optical Fiber Technology 31 (2016): 32-35.
Teng, Chuanxin, et al. “Investigation of a Macro-Bending Tapered Plastic Optical Fiber for Refractive Index Sensing.” IEEE Sensors Journal 16.20 (2016): 7521-7525.
Stupar, Dragan Z., et al. “Wearable low-cost system for human joint movements monitoring based on fiber-optic curvature sensor.” IEEE Sensors Journal 12.12 (2012): 3424-3431.
Anwar Zawawi, Mohd, Sinead O'Keffe, and Elfed Lewis. “Intensity-modulated fiber optic sensor for health monitoring applications: a comparative review.” Sensor Review 33.1 (2013): 57-67.
Silva-López, Manuel, et al. “Strain and temperature sensitivity of a single-mode polymer optical fiber.” Optics Letters 30.23 (2005): 3129-3131.
Kiesel, Sharon, et al. “Large deformation in-fiber polymer optical fiber sensor.” IEEE Photonics Technology Letters 20.6 (2008): 416-418.
Gallego, Daniel, and Horacio Lamela. “High-sensitivity ultrasound interferometric single-mode polymer optical fiber sensors for biomedical applications.” Optics letters 34.12 (2009): 1807-1809.
Kiesel, Sharon, et al. “Polymer optical fiber sensors for the civil infrastructure.” Smart Structures and Materials. International Society for Optics and Photonics, 2006.
Jiang, Guoliang, et al. “Oscillator interrogated time-of-flight optical fiber interferometer for global strain measurements.” Sensors and Actuators A: Physical 135.2 (2007): 443-450.
Durana, Gaizka, et al. “Use of a novel fiber optical strain sensor for monitoring the vertical deflection of an aircraft flap.” IEEE sensors journal 9.10 (2009): 1219-1225.
Liehr, Sascha, et al. “Polymer optical fiber sensors for distributed strain measurement and application in structural health monitoring.” IEEE Sensors Journal 9.11 (2009): 1330-1338.
Leung, Christopher KY, et al. “Review: optical fiber sensors for civil engineering applications.” Materials and Structures 48.4 (2015): 871-906.
Witt, Jens, et al. “Medical textiles with embedded fiber optic sensors for monitoring of respiratory movement.” IEEE Sensors Journal 12.1 (2012): 246-254.
Peng, G. D., Z. Xiong, and P. L. Chu. “Photosensitivity and gratings in dye-doped polymer optical fibers.” Optical Fiber Technology 5.2 (1999): 242-251.
Liu, H. Y., H. B. Liu, and G. D. Peng. “Tensile strain characterization of polymer optical fibre Bragg gratings.” Optics Communications 251.1 (2005): 37-43.
Liu, H. Y., G. D. Peng, and P. L. Chu. “Thermal tuning of polymer optical fiber Bragg gratings.” IEEE Photonics Technology Letters 13.8 (2001): 824-826.
Luo, Yanhua, et al. “Analysis of multimode POF gratings in stress and strain sensing applications.” Optical Fiber Technology 17.3 (2011): 201-209.
Liu, H. B., et al. “Novel growth behaviors of fiber Bragg gratings in polymer optical fiber under UV irradiation with low power.” IEEE Photonics Technology Letters 16.1 (2004): 159-161.
Emiliyanov, Grigoriy, et al. “Localized biosensing with Topas microstructured polymer optical fiber.” Optics Letters 32.5 (2007): 460-462.
Yang, Chunxue, et al. “Selectively liquid-infiltrated microstructured optical fiber for simultaneous temperature and force measurement.” IEEE Photonics Journal 6.2 (2014): 1-8.
Peng, Lirong, et al. “Gaseous ammonia fluorescence probe based on cellulose acetate modified microstructured optical fiber.” Optics Communications 284.19 (2011): 4810-4814.
Wolfbeis, Otto S., and Hermann E. Posch. “Fibre-optic fluorescing sensor for ammonia.” Analytica Chimica Acta 185 (1986): 321-327.
Johnson, Ian P., Kyriacos Kalli, and David J. Webb. “827 nm Bragg grating sensor in multimode microstructured polymer optical fibre.” Electronics letters 46.17 (2010): 1.
Markos, Christos, et al. “High-T g TOPAS microstructured polymer optical fiber for fiber Bragg grating strain sensing at 110 degrees.” Optics express 21.4 (2013): 4758-4765.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2017 The Author(s)
About this chapter
Cite this chapter
Domingues, M.d.F.F., Radwan, A. (2017). Polymer Optical Fiber Sensors. In: Optical Fiber Sensors for loT and Smart Devices. SpringerBriefs in Electrical and Computer Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-47349-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-47349-9_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-47348-2
Online ISBN: 978-3-319-47349-9
eBook Packages: EngineeringEngineering (R0)