Skip to main content

Effect of Titanium Coating on the Structural and Optical Properties of TiO2 Thin Films for Improved Performance in Dye-Sensitized Solar Cells

  • Conference paper
  • First Online:
Recent Trends in Materials Science and Applications

Part of the book series: Springer Proceedings in Physics ((SPPHY,volume 189))

Abstract

In favor of enhancing the performance of TiO2 photoanode-based dye sensitized solar cells (DSSCs), a thin layer of titanium was coated on Indium doped tin oxide (ITO) conductive glass substrate prior to the coating of TiO2 by using sol-gel spin coating technique. Titanium coating was obtained by DC sputtering method using titanium target and its effect on the structure, morphology of TiO2 and the photovoltaic properties of the subsequent DSSCs were studied. Porous morphology was observed in the TiO2 film with titanium coating. The photoelectric conversion efficiency of DSSC based on TiO2 with titanium coating is larger than that without titanium coating. An efficiency of 3 % was obtained for titanium coated TiO2 electrode. The improvement of the solar cell may be due to the increase in dye adsorption of TiO2 thin film with titanium coating. In this work, the novelty lies in the role of titanium which is for the first time coated beneath the TiO2 film resulting in the improved structure and morphology of the photo anode and thereby an enhanced DSSC efficiency.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 329.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Bandara, H.M.N., Rajapakse, R.M.G., Murakami, K., Kumara, G.R.R.A., Anuratha Sepalage, G.: Dye-sensitized solar cell based on optically transparent TiO2 nanocrystalline electrode prepared by atomized spray pyrolysis technique. Electrochim. Acta 56, 9159–9161 (2011)

    Article  Google Scholar 

  2. Girtan, M., Stanculescu, A., Leontie, L., Habelhames, F., Antohe, S.: On titanium oxide spray deposited thin films for solar cells applications. Proc. Rom. Acad. Ser. A 13, 335–342 (2012)

    Google Scholar 

  3. Hou, Y.Q., Zhuang, D.M., Zhang, G., Zhao, M., Wu, M.S.: Influence of annealing temperature on the propertiesof titanium oxide thin film. Appl. Surf. Sci. 218, 97–105 (2003)

    Article  ADS  Google Scholar 

  4. Castillo, N., Olguin, D., Conde-Gallardo, A., Jimenez-Sandoval, S.: Structural and morphological properties of TiO2 thin films prepared by spray pyrolysis. Rev. Mex. Fis. 50, 382–387 (2004)

    Google Scholar 

  5. Hagfeldt, A., Grätzel, M.: Molecular photovoltaics. Acc. Chem. Res. 33, 269–277 (2000)

    Article  Google Scholar 

  6. Zhang, Q., Cao, G.: Nanostructured photoelectrodes for dye-sensitized solar cells. Nano Today 6, 91–109 (2011)

    Article  Google Scholar 

  7. Asagoe, K., Suzuki, Y., Ngamsinlapasathian, S., Yoshikawa, S.: TiO2-anatase nanowire dispersed composite electrode for dye-sensitized solar cells. J. Phys: Conf. Ser. 61, 1112–1116 (2007)

    Google Scholar 

  8. Baxter, J.B., Aydil, E.S.: Nanowire-based dye-sensitized solar cells. Appl. Phys. Lett. 86, 053114 (2005)

    Article  ADS  Google Scholar 

  9. Pavasupree, S., Ngamsinlapasathian, S., Nakajima, M., Suzuki, Y., Yoshikawa, S.: Synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of nanorods/nanoparticles TiO2 with mesoporous structure. J. Photochem. Photobiol., A 184, 163–169 (2006)

    Article  Google Scholar 

  10. Yu, J.G., Zhao, X.J., Zhao, Q.N.: Photocatalytic activity of nanometer TiO2 thin films prepared by the sol-gel method. Mater. Chem. Phys. 69, 25–29 (2001)

    Article  Google Scholar 

  11. Liu, J., Yang, D., Shi, F., Cai, Y.: Sol-gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement. Thin Solid Films 429, 225–230 (2003)

    Article  ADS  Google Scholar 

  12. Mechiakh, R., Meriche, F., Kremer, R., Bensaha, R., Boudine, B., Boudrioua, A.: TiO2 thin films prepared by sol-gel method for waveguiding applications: correlation between the structural and optical properties. Opt. Mater. 30, 645–651 (2007)

    Article  ADS  Google Scholar 

  13. Nair, A.S., Jose, R., Shengyuan, Y., Ramakrishna, S.: A simple recipe for an efficient TiO2 nanofiber-based dye-sensitized solar cell. J. Colloid Interface Sci. 353, 39–45 (2011)

    Article  Google Scholar 

  14. Greiner, A., Wendorff, J.H.: Electrospinning: a fascinating method for the preparation of ultrathin fibers. Angew. Chem. Int. Ed. 46, 5670–5703 (2007)

    Article  Google Scholar 

  15. Mohammadi, M.R., Cordero-Cabrera, M.C., Ghorbani, M., Fray, D.J.: Synthesis of high surface area nanocrystalline anatase-TiO2 powders derived from particulate sol-gel route by tailoring processing parameters. J. Sol-Gel. Sci. Technol. 40, 15–23 (2006)

    Article  Google Scholar 

  16. Liu, B., Aydil, E.S.: Growth of oriented single-crystalline rutile TiO2 nanorods on transparent conducting substrates for dye-sensitized solar cells. J. Am. Chem. Soc. 131, 3985–3990 (2009)

    Article  Google Scholar 

  17. Wang, J.Y., Zhang, T.J., Wang, D.F., Pan, R.K., Wang, Q.Q., Xia, H.M.: Improved morphology and photovoltaic performance in TiO2 nanorod arrays based dye sensitized solar cells by using a seed layer. J. Alloys Compd. 551, 82–87 (2013)

    Article  ADS  Google Scholar 

  18. Nwanya, A.C., Ezema, F.I., Ejikeme, P.M.: Dyed sensitized solar cells: a technically and economically alternative concept to p-n junction photovoltaic devices. Int. J. Phys. Sci. 6, 5190–5201 (2011)

    Google Scholar 

  19. Zhao, J., Wan, P., Xiang, J., Tong, T., Dong, L., Gao, Z., Shen, X., Tong, H.: Synthesis of highly ordered macro-mesoporous anatase TiO2 film with high photocatalytic activity. Microporous Mesoporous Mater. 138, 200–206 (2011)

    Article  Google Scholar 

  20. Tsuge, Y., Inokuchi, K., Onozuka, K., Shingo, O., Sugi, S., Yoshikawa, M., Shiratori, S.: Fabrication of porous TiO2 films using a spongy replica prepared by layer-by-layer self-assembly method: Application to dye-sensitized solar cells. Thin Solid Films 499, 396–401 (2006)

    Article  ADS  Google Scholar 

  21. Ineta, L., Gunars, B., Andrejs, L., Gundars, M., Martins, V.: Preparation and characterization of nanostructured Fe-TiO2 thin films produced by electrophoretic deposition. Mater. Sci. Eng. 49, 012060 (2013)

    Google Scholar 

  22. Maiyalagan, T., Viswanathan, B., Varadaraju, U.V.: Fabrication and characterization of uniform TiO2 nanotube arrays by sol-gel template method. Bull. Matter. Sci. 29, 705–708 (2006)

    Google Scholar 

  23. Zhu, G., Xu, T., Lv, T., Pan, L., Zhao, Q., Sun, Z.: Graphene-incorporated nanocrystalline TiO2 films for CdS quantum dot-sensitized solar cells. J. Electroanal. Chem. 650, 248–251 (2011)

    Article  Google Scholar 

  24. Jin-Kook Lee, J.K., Jeong, B., Jang, S., Kim, Y.-G., Jang, Y.-W., Lee, S., Kim, M.: Preparations of TiO2 pastes and its application to light-scattering layer for dye-sensitized solar cells. J. Ind. Eng. Chem. 15, 724–729 (2009)

    Article  Google Scholar 

  25. Liao, M.Y., Fang, L., Xu, C.L., Wu, F., Huang, Q.L., Saleem, M.: Effect of seed layer on the growth of rutile TiO2 nanorod arrays and their performance in dye-sensitized solar cells. Mater. Sci. Semicond. Process. 24, 1–8 (2014)

    Article  Google Scholar 

  26. Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B.F.E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, MdK, Grätzel, M.: Dye-sensitized solar cells with 13 % efficiency achieved through the molecular engineering of porphyrin sensitizers. Nat. Chem. 6, 242–247 (2014)

    Article  Google Scholar 

  27. Kern, R., Sastrawan, R., Ferber, J., Stangl, R., Luther, J.: Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions. Electrochim. Acta 47, 4213–4225 (2002)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to R. Jeba Beula .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2017 Springer International Publishing Switzerland

About this paper

Cite this paper

Jeba Beula, R., Devadason, S., Mahesh Kumar, V. (2017). Effect of Titanium Coating on the Structural and Optical Properties of TiO2 Thin Films for Improved Performance in Dye-Sensitized Solar Cells. In: Ebenezar, J. (eds) Recent Trends in Materials Science and Applications. Springer Proceedings in Physics, vol 189. Springer, Cham. https://doi.org/10.1007/978-3-319-44890-9_40

Download citation

Publish with us

Policies and ethics