Abstract
This chapter is devoted to the disc specimens with notches. Calculations were made for tensile disc specimen with edge U-shaped notch either without crack or with crack growing from the notch tip. Analysis was made also for compression disc specimens with the rhombic hole or narrow slot. The solution was obtained for ring-shaped specimens with inner edge U-shaped notches as well.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Allery, M.B.P., Birkbeck, G.: Effect of notch root radius on the initiation and propagation of fatigue cracks. Eng. Fract. Mech. 4, 325–331 (1972)
Atahan, H.N., Tasdemir, M.A., Tasemir, C., Ozyurt, N., Akyuz, S.: Mode I and mixed mode fracture studies in brittle materials using the Brazilian disc specimen. Mater. Struct. 38, 305–312 (2005)
Atkinson, C., Smelser, R., Sanchez, J.: Combined mode fracture via the cracked brazilian disk test. Int. J. Fract. 18(4), 279–291 (1982)
Awaji, H., Sato, S.: Combined mode fracture toughness measurement by the disk test. J. Eng. Mater. Technol. 100, 175–182 (1978)
Ayatollahi, M.R., Nejati, M.: Experimental evaluation of stress field around the sharp notches using photoelasticity. Mater. Des. 32(2), 561–569 (2011)
Ayatollahi, M.R., Torabi, A.R.: Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen. Int. J. Solids Struct. 47, 454–465 (2010)
Ayatollahi, M.R., Torabi, A.R.: Investigation of mixed mode brittle fracture in rounded-tip v-notched components. Eng. Fract. Mech. 77(16), 3087–3104 (2010)
Ayatollahi, M.R., Torabi, A.R.: Experimental verification of RV-MTS model for fracture in soda-lime glass weakened by a V-notch. J. Mech. Sci. Technol. 25(10), 2529–2534 (2011)
Ayatollahi, M.R., Mirsayar, M.M., Dehghany, M.: Experimental determination of stress field parameters in bi-material notches using photoelasticity. Mater. Des. 32(10), 4901–4908 (2011)
Ayatollahi, M.R., Torabi, A.R., Azizi, P.: Experimental and theoretical assessment of brittle fracture in engineering components containing a sharp V-notch. Exp. Mech. 51, 919–932 (2011)
Berto, F., Ayatollahi, M.R.: Fracture assessment of Brazilian disc specimens weakened by blunt V-notches under mixed mode loading by means of local energy. Mater. Des. 32(5), 2858–2869 (2011)
Chawla, M.M., Ramakrishnan, T.R.: Modified Gauss-Jacobi quadrature formulas for the numerical evaluation of Cauchy type singular integrals. BIT Numer. Math. 14(1), 14–21 (1974)
de Carvalho, E.: Stress concentration factors for an internally pressurized circular vessel containing a radial U-notch. Int. J. Press. Vessels Pip. 82(7), 517–521 (2005)
El Minor, H., Kifani, A., Louah, M., Azari, Z., Pluvinage, G.: Fracture toughness of high strength steel - using the notch stress intensity factor and volumetric approach. Struct. Saf. 25(1), 35–45 (2003)
Heckel, K., Wagner, R.: The tensile fatigue behavior of ct-specimens with small notch root radius. Int. J. Fract. 11(1), 135–140 (1975)
Kazberuk, A.: Determining parameters of fracture toughness of quasibrittle materials using specimens with notches. Acta Mech. Autom. 3(3), 28–31 (2009)
Kazberuk, A.: Dwuwymiarowe zagadnienia mechaniki pȩkania ciał z karbami (Two-dimensional problems of fracture mechanics of bodies with notches). Bialystok University of Technology, Bialystok (2010)
Libatskii, L., Kovchik, S.: Fracture of discs containing cracks. Mater. Sci. 3(4), 334–339 (1967)
Miklyayev, P.G., Neshpor, G.S., Kudryashov, V.G.: Kinetika razrusheniya (Kinetics of fracture). Metallurgiya, Moscow (1979)
Murakami, Y.: Stress Intensity Factors Handbook. Pergamon Press, Oxford (1987)
Muskhelishvili, N.I.: Some Basic Problems of the Mathematical Theory of Elasticity, 2nd edn. Noordhoff International Publishing, Leyden (1977)
Muskhelishvili, N.I.: Singular Integral Equations: Boundary Problems of Function Theory and Their Application to Mathematical Physics. Dover Books on Physics, Dover Publications, New York (2008)
Newman Jr., J.C.: Stress-intensity factors and crack-opening displacements for round compact specimens. Int. J. Fract. 17(6), 567–578 (1981)
Niu, L.S., Shi, H.J., Robin, C., Pluvinage, G.: Elastic and elastic-plastic fields on circular rings containing a V-notch under inclined loads. Eng. Fract. Mech. 68(7), 949–962 (2001)
Panasyuk, V.V., Savruk, M.P., Zboromirskii, A.I., Ostash, O.P.: Investigation of the stress state of the disk with an edge notch as a specimen for the study of crack initiation. Proc. Acad. Sci. USSR 272, 816–819 (1983)
Panasyuk, V.V., Savruk, M.P., Zboromirskii, A.I., Ostash, O.P., Kostyk, E.M.: A sample for investigation of the rules of crack origin. Mater. Sci. 20(4), 369–378 (1984)
Saanouni, K., Bathias, C.: Study of fatigue crack initiation in the vicinity of notches. Eng. Fract. Mech. 16(5), 695–706 (1982)
Savruk, M.P.: System of curved cracks in an elastic body under different boundary conditions on their lips. Mater. Sci. 14(6), 641–649 (1978)
Savruk, M.P.: Dvumernyye zadachi uprugosti dla tel s treshchinami (Two-dimensional problems of elasticity for bodies with cracks). Naukova dumka, Kyiv (1981)
Savruk, M.P.: Koeficienty intensivnosti napryazhenii v telakh s treshchinami (Stress intensity factors in bodies with cracks). Naukova dumka, Kyiv (1988)
Savruk, M.P., Osiv, P.M., Prokopchuk, I.V.: Chislennyy analiz v ploskikh zadachakh teorii treshchin (Numerical analysis in plane problems of theory of cracks). Naukova dumka, Kyiv (1989)
Savruk, M.P., Panasyuk, I.V., Osiv, P.N.: Stresses in a plate with a crack and two round holes loaded by tensile forces. Mater. Sci. 17, 555–560 (1981)
Schijve, J.: The stress intensity factor of small cracks at notches. Fatig. Fract. Eng. Mater. Struct. 5(1), 77–90 (1982)
Smith, R.A., Miller, K.J.: Prediction of fatigue regimes in notched components. Int. J. Mech. Sci. 20(4), 201–206 (1978)
Torabi, A.R., Jafarinezhad, M.R.: Comprehensive data for rapid calculation of notch stress intensity factors in U-notched brazilian disc specimen under tensile-shear loading. Mater. Sci. Eng. A A541, 135–142 (2012)
Torabi, A.R., Taherkhani, M.: Extensive data of notch shape factors for V-notched brazilian disc specimen under mixed mode loading. Mater. Sci. Eng. A 528(29), 8599–8609 (2011)
Yamamoto, Y., Ao, K.: Stress intensity factors for cracks in notch bend specimens for three-point bending. Int. J. Fract. 12(3), 495–498 (1976)
Yarema, S.Y.: Stress state of disks with cracks, recommended as specimens for investigating the resistance of materials to crack development. Mater. Sci. 12(4), 361–374 (1977)
Yarema, S.Y., Krestin, G.S.: Determination of the modulus of cohesion of brittle materials by compressive tests on disc specimens containing cracks. Mater. Sci. 2(1), 7–10 (1966)
Yarema, S.Y., Krestin, G.S.: Limiting equilibrium of a disk with a diametral crack. Int. Appl. Mech. 4(7), 55–58 (1968)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Savruk, M.P., Kazberuk, A. (2017). Disc Specimens with Notches. In: Stress Concentration at Notches. Springer, Cham. https://doi.org/10.1007/978-3-319-44555-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-44555-7_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44554-0
Online ISBN: 978-3-319-44555-7
eBook Packages: EngineeringEngineering (R0)