Abstract
The meshing analysis for the TA worm is performed. The formulae to determine the key points on the boundary of the contact zone are proposed. Based on this, the strategy to obtain the contact lines and the instantaneous contact points is put forward. The existence of the constant contact line is proved and verified numerically. The numerical consequences manifest that the local meshing quality is relatively good. The meshing analysis makes clear that the way to improve the meshing behaviour further is to remove the constant contact line by the modification.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Buckingham, E.: Analytical Mechanics of Gears, 3rd edn. Dover Publications, INC, New York (1988)
Crosher, W.P.: Design and application of the worm gear. ASME Press, New York (2002)
Dudas, I.: The Theory and Practice of Worm Gear Drives. Penton Press, London (2000)
Dong, X.: Foundation of Meshing Theory for Gear Drives. China Machine Press, Beijing (1989)
Dong, X.: Design and Modification of Hourglass Worm Drives. China Machine Press, Beijing (2004)
Editorial committee for gear handbook, Gear Handbook, 2nd edn. vol. 1. China Machine Press, Beijing (2004)
Hu, L.: Spatial Meshing Theory and Its Application, vol. 1−2. Coal Industry Press, Beijing (1987)
Hu, S., Li, S., et al.: Design of Worm Drives, vol. 2. China Machine Press, Beijing (1987)
Litvin, F.L.: Translated into Chinese by Chun Ding in 1964, Meshing Principle for Gear Drives. Shanghai Science and Technology Press, Shanghai (1960)
Litvin, F.L.: Translated into Chinese by Xianzan Lu, Yetian Gao, et al, Meshing Principle for Gear Drives (second edition), Shanghai: Shanghai Science and Technology Press (1984)
Litvin, F.L.: Development of Gear Technology and Theory of Gearing, Cleveland. NASA Reference Publication, Ohio (1997)
Litvin, F.L., Fuentes, A.: Gear Geometry and Applied Theory, 2nd edn. Cambridge University Press (2004)
Wu, D., Jiashun, Luo: Meshing Theory for Gear Drives. Science Press, Beijing (1985)
Zhao, S., Xu, D., et al.: Novel Types of Worm Drive. Shaanxi Science and Technology Press, Xi’an (1990)
Zhao, Y.: Zhang. Yimin, Novel Methods for Curvature Analysis and Their Application to TA Worm, Mechanism and Machine Theory 97(3), 155–170 (2016)
Acknowledgments
The research work in this paper was fully supported by National Natural Science Foundation of China under Grant No. 51475083, New Century Excellent Talents Project by Education Ministry of China under Grant No. NCET-13-0116, National Key Basic Research Development Plan of China (the 973 Program) under Grant No. 2014CB046303, and Excellent Talents Support Program in Institutions of Higher Learning in Liaoning Province China under Grant No. LJQ2013027.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Zhao, Y. (2017). Meshing Analysis for TA Worm Drive. In: Wenger, P., Flores, P. (eds) New Trends in Mechanism and Machine Science. Mechanisms and Machine Science, vol 43. Springer, Cham. https://doi.org/10.1007/978-3-319-44156-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-44156-6_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-44155-9
Online ISBN: 978-3-319-44156-6
eBook Packages: EngineeringEngineering (R0)