Abstract
Predicting the properties of dust generated at mine sites is important for understanding the impact of dust dispersal to the surrounding environment. This chapter presents a new approach to predicting the mineralogical properties of the PM2.5 and PM10 dust fractions. A purpose-built dust resuspension machine was fitted with a size selective sampler to collect dust fractions. Dust particles were collected onto a polycarbonate filter, which was analyzed using a scanning electron microscope (SEM). Backscattered electron (BSE) maps of the polycarbonate surface were imaged and processed to determine dust properties. For a given population of particles, the BSE brightness distribution of the 2–5 and 5–10 µm size fractions were quantified. The mineralogical composition of the dust size fractions were inferred by the BSE brightness as biogenic particles and sulfates (30–50), silicates (60–100), iron silicates and oxides (110–190), and sulfides (>200). The method was validated by comparing laboratory-generated dust fractions with those collected from dust monitoring stations at a tailings repository site. Similar dust composition and size fractions were observed for both laboratory and field samples. Consequently, the purpose-built dust resuspension device and associated laboratory procedures allow the prediction of mineralogical properties of dust at mine sites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Corriveau MC, Jamieson HE, Parsons MB, Campbell JL, Lanzirotti A (2011) Direct characterization of airborne particles associated with arsenic-rich mine tailings: particle size, mineralogy and texture. Appl Geochem 26:1639–1648
Gelencser A, Kovats N, Turocz B, Rostasi A, Hoffer A, Imre K, Nyiro-Kosa I, Csaberenyi-Malasics D, Toth A, Czitrovsky A, Nagy A, Nagy S, Acs A, Kovacs A, Ferincz A, Hartyani Z, Posfai M (2011) The red mud accident in Ajka (Hungary): characterization and potential health effects of fugitive dust. Environ Sci Technol 45:1608–1615
Howell PGT, Davy KMW, Boyde A (1998) Mean atomic number and backscattered electron coefficient calculations for some materials with low mean atomic number. Scanning 20:35–40
King RWL (1964) Survey of mineral resources tasmanian tailing dumps. Bureau of Mineral Resources Geology and Geophysics
Kribek B, Majer V, Pasava J, Kamona F, Mapani B, Keder J, Ettler V (2014) Contamination of soils with dust fallout from the tailings dam at the Rosh Pinah area, Namibia: Regional assessment, dust dispersion modeling and environmental consequences. J Geochem Explor 144:391–408
Moreno T, Higueras P, Jones T, McDonald I, Gibbons W (2005) Size fractionation in mercury-bearing airborne particles (HgPM10) at Almaden, Spain: implications for inhalation hazards around old mines. Atmos Environ 39:6409–64419
Reed WR (2005) Significant dust dispersion models. Information circular 9478, NIOSH, 29 pp
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Noble, T.L., Berry, R.F., Goemann, K., Lottermoser, B. (2017). Prediction of Mineral Dust Properties at Mine Sites. In: Lottermoser, B. (eds) Environmental Indicators in Metal Mining. Springer, Cham. https://doi.org/10.1007/978-3-319-42731-7_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-42731-7_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-42729-4
Online ISBN: 978-3-319-42731-7
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)