Abstract
A challenge in fabricating compliant electrical sensors for various applications, such as wearable electronics, has been the lack of compatible connection concepts that are reliable and can support large levels of force without failure. Recently, we have developed compliant, carbon-based strain and thermal sensors using nanosized exfoliated graphite (EG) dispersed in latex that are highly deformable (>50 % strain) and piezoresistive. They undergo large changes in electrical resistance, resulting in highly sensitive strain (1 × 10−3/μstrain) and thermal (1 × 10−3/K) measurement sensors. Such compliant sensors are typically attached to external wiring using conductive silver epoxies or paints. However, the silver epoxy and the metal wires are rigid, and they detach from the compliant sensor at low load levels. By using micron-sized braided carbon fibers instead of metal, and a carbon-based composite instead of silver epoxy, a mechano-electrical interface to the sensor is created that has a significantly higher load bearing capacity than achieved with metal wires, with an inherent electrical resistivity of only 1.7 × 10−3 Ω−cm. The resulting sensor is similar to a sensory nerve receptor where the percolated network of nanosized EG act as “receptors,” while the micro-sized carbon fiber acts as the sensory ganglion attaching to the central nervous system. The resulting “biologically inspired” multi-scale strain and temperature sensor has advantages in addition to durability, including amenability to additive manufacturing processes, ease of fabrication, and scalability. We also demonstrate the ability to use the new sensing material to make “sensing gloves” that could potentially be used in applications such as recording signals during manual tasks by human hands or for providing sensing capability to robotic hands.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Wissman, J., Perez-Rosado, A., Edgerton, A., Levi, B.M., Karakas, Z.N., Kujawski, M., Philipps, A., Papavizas, N., Fallon, D., Bruck, H.A., Smela, E.: New compliant strain gauges for self-sensing dynamic deformation of flapping wings on miniature air vehicles. Smart Mater. Struct. 22, 085031 (2013)
Kujawski, M., Pearse, J.D., Smela, E.: Elastomers filled with exfoliated graphite as compliant electrodes. Carbon 48, 2409–2417 (2010)
Sauerbrunn, E., Chen, Y., Didion, J., Yu, M., Smela, E., Bruck, H.A.: Thermal imaging using polymer nanocomposite temperature sensors. Phys. Status Solidi A 212, 2239–2245 (2015)
Chen, Y., Yu, M., Bruck, H.A., Smela, E.: Stretchable touch-sensing skin over padding for co-robots. Smart Mater. Struct. 25, 055006 (2016)
Kujawski, M., Pearse, J., Smela, E.: Graphite/PDMS stretchable electrodes for dielectric elastomer actuators. Paper presented at Electroactive Polymer Actuators and Devices (EAPAD) XII, SPIE Symposium on SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, San Diego, 7–11 Mar 2010
Kalaitzidou, K., Fukushima, H., Drzal, L.T.: Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites. Compos. A: Appl. Sci. Manuf. 38, 1675–1682 (2007)
Falcao, E.H., Blair, R.G., Mack, J.J., Viculis, L.M., Kwon, C.W., Bendikov, M., Kaner, R.B., Dunn, B.S., Wudl, F.: Microwave exfoliation of a graphite intercalation compound. Carbon 45, 1367–1369 (2007)
Wei, T., Fan, Z.J., Luo, G.L., Zheng, C., Xie, D.S.: A rapid and efficient method to prepare exfoliated graphite by microwave irradiation. Carbon 47, 337 (2009)
Acknowledgments
Funding for this research was provided by NSF through the National Robotics Initiative (NRI) under award number IIS1317913.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Bruck, H.A., Smela, E., Yu, M., Chen, Y., Spokes, J. (2017). A New Multiscale Bioinspired Compliant Sensor. In: Ralph, W., Singh, R., Tandon, G., Thakre, P., Zavattieri, P., Zhu, Y. (eds) Mechanics of Composite and Multi-functional Materials, Volume 7 . Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-41766-0_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-41766-0_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-41765-3
Online ISBN: 978-3-319-41766-0
eBook Packages: EngineeringEngineering (R0)