Abstract
Personal mobility, such as, for example, the ability to get up and sit down independently, decreases by age. In Germany, one out of ten people older than 75 years needs long-term care and thereby support in personal mobility. Within the age group of 80+ years this number increases even more. Personal immobility is one of the main reasons for the necessity of a caregiver. To improve older persons’ independent mobility, supporting technical devices like walking sticks, walkers and wheel chairs established themselves. However, these devices can just be used after the patient gets up or sits down. For these special situations, technical solutions are also available. They are able to support a user even during situations in which he or she needs to be lifted. But they are not used frequently due to various reasons such as high costs and high stigmatization potential. In this study, the Kano model was used to analyze different customer requirements for initial contact with such a technical mobility aid. Investigated requirements were, for example, design, acceptance of mobility aids’ sharing solutions, usability and usage sites of such aids. The study revealed individual design to be an attractive customer requirement whereas a pooling solution and hence sharing the mobility aid leads to a decreased customer value. All in all, this study stresses customers’ acceptance of mobility aids and identifies several customer requirements for a positive initial contact.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lindgaard, G., Fernandes, G., Dudek, C., Brown, J.: Attention web designers: you have 50 milliseconds to make a good first impression! Behav. Inf. Technol. 25(2), 115–126 (2006)
Statistisches Bundesamt. 70 % of the persons in need of long-term care are taken care of at home: Wiesbaden, 2013
AAL in der alternden Gesellschaft. Anforderungen, Akzeptanz und Perspektiven; Analyse und Planungshilfe. In: Meyer, S. (ed.) AAL-Schriftenreihe Bd. 2; VDE-Verl. Offenbach, Berlin (2010)
Kano, N., Seraku, N., Takahashi, F., Tsuji, F.: Attractive quality and must-be quality. J. Jpn. Soc. Qual. Control 14(2), 147–156 (1984)
Hölzing, J.A.: Kano-Theorie der Kundenzufriedenheit. Springer, Berlin (2008)
Herzberg, F., Mausner, B., Snyderman, B.B.: The Motivation to Work. Transaction publishers, Piscataway (2011)
Holbrook, M.B.: Consumer Value: A Framework for Analysis and Research. Psychology Press, Abingdon (1999)
Lee, M.C., Newcomb, J.: Applying the Kano methodology to meet customer requirements: NASA’s microgravity science program. Qual. Manage. J. 4, 95–106 (1997)
Berger, C., Blauth, R., Boger, D., Bolster, C., Burchill, G., DuMouchel, W., Pouliot, F., Richter, R., Rubinoff, A., Shen, D.: Kano’s methods for understanding customer-defined quality. Cent. Qual. Manage. J. 2(4), 3–35 (1993)
Fong, D.: Using the self-stated importance questionnaire to interpret Kano questionnaire results. Cent. Qual. Manage. J. 5(3), 21–24 (1996)
Mertens, A., Brandl, C., Blotenberg, I., Lüdtke, M., Jacobs, T., Bröhl, C., Mayer, M.P., Schlick, C.M.: Human-Robot Interaction: Testing Distances that Humans will Accept Between Themselves and a Robot Approaching at Different Speeds, pp. 269–286. Ambient Assisted Living, Springer, Berlin (2014)
Acknowledgments
This publication is part of the research project “TECH4AGE”, which is funded by the German Federal Ministry of Education and Research (BMBF, Grant No. 16SV7111) supervised by the VDI/VDE Innovation + Technik GmbH.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Brandl, C. et al. (2017). Incentives for the Acceptance of Mobility Equipment by Elderly People on the Basis of the Kano Model: A Human Factors Perspective for Initial Contact with Healthcare Products. In: Duffy, V., Lightner, N. (eds) Advances in Human Factors and Ergonomics in Healthcare. Advances in Intelligent Systems and Computing, vol 482. Springer, Cham. https://doi.org/10.1007/978-3-319-41652-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-41652-6_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-41651-9
Online ISBN: 978-3-319-41652-6
eBook Packages: EngineeringEngineering (R0)