Abstract
The aim of this experimental study is to evaluate the tool life of each cutting material used in dry turning of X20Cr13 steel. The tests of straight turning were carried out using the following cutting materials: CVD coated carbide (GC2015) and PVD coated carbide (GC1015). Experimental results enable us to study the influence of machining time on flank wear VB of these cutting materials and to determine their lifespan for this cutting regime (depth of cut ap = 0.2 mm, feed rate f = 0.08 mm/rev and cutting speed Vc = 280 m/min). It arise that CVD coated carbide (insert GC2015) is more resistant to wear than cutting materials. Its tool life is 65 min and consequently, it is the most powerful.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Bouchelagheme, H.: Etude du comportement des outils CBN lors de l’usinage de l’acier fortement allie AISI D3. Thesis University of Guelma, Algeria (2011)
Fnides, B., Yallese, M.A., Aouici, H.: Comportement à l’usure des céramiques de coupe (Al2O3 + TiC et Al2O3 + SiC) en tournage des pièces trempées. Algerian J. Adv. Mater 5, 121–124 (2008)
Uvaraja, V.C., Natarajan, N.: Optimization on friction and wear process parameters using Taguchi technique. Int. J. Eng. Technol. 2, 694–699 (2012)
Yallese, M.A., Chaoui, K., Zeghib, N., Boulanouar, L., Rigal, J.F.: Hard machining of hardened bearing steel using cubic boron nitride tool. J. Mater. Process. Technol. 209, 1092–1104 (2009)
SANDVIK Coromant: Catalogue Général, Outils de coupe SandvikCoromant, Tournage –Fraisage – Perçage – Alésage – Attachements (2009)
Dogra, M., Sharma, V.S., Sachdeva, A., Suri, N.M., Dureja, J.S.: Tool wear, chip formation and workpiece surface issues in CBN hard turning: a review. Int. J. Precis. Eng. Manuf. 11, 341–358 (2010)
Fnides, B., Yallese, M.A., Mabrouki, T., Rigal, J.F.: Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel. Sadhana 36, 109–123 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Bouzid, L., Yallese, M.A., Belhadi, S., Boulanouar, L. (2017). Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 Stainless Steel. In: Boukharouba, T., Pluvinage, G., Azouaoui, K. (eds) Applied Mechanics, Behavior of Materials, and Engineering Systems. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-41468-3_37
Download citation
DOI: https://doi.org/10.1007/978-3-319-41468-3_37
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-41467-6
Online ISBN: 978-3-319-41468-3
eBook Packages: EngineeringEngineering (R0)