Abstract
This chapter presents a 3D solution to the problem of medium deformation in conditions of its simultaneous solidification. The proposed solution consists of four sub-models. These are a mechanical model based upon a rigid-plastic solution, and a thermal model based on the Fourier equation solution. Another key component model is the model of function of stress versus strain change.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Malinowski Z (2005) Numeryczne modele w przeróbce plastycznej i wymianie ciepła. AGH, Krakow, Poland
Hadala B, Cebo-Rudnicka A, Malinowski Z et al (2011) The influence of thermal stresses and strand bending on surface defects formation in continuously cast strands. Arch Metall Mater 56:367–377
Malinowski Z, Rywotycki M (2009) Modelling of the strand and mold temperature in the continuous steel caster. Arch Civ Mech Eng 9:59–73
Milkowska-Piszczek K, Rywotycki M, Falkus J et al (2015) A comparison of models describing heat transfer in the primary cooling zone of a continuous casting machine. Arch Metall Mater 60:239–244
Glowacki M (1998) Termomechaniczno-mikrostrukturalny model walcowania w wykrojach kształtowych. AGH, Krakow, Poland
Glowacki M (2012) Modelowanie matematyczne i symulacja odkształcania metali. AGH, Krakow, Poland
Zienkiewicz OC, Taylor RL, Zhu JZ (2005) The finite element method: its basis and fundamentals. Elsevier Butterworth-Heinemann, Oxford, UK
Glowacki M, Hojny M, Kuziak R (2012) Computer aided investigation of mechanical properties of semi-solid steels. AGH, Krakow, Poland
Hojny M (2014) Projektowanie dedykowanych systemów symulacji odkształcania stali w stanie półciekłym. Wzorek, Krakow, Poland
Lewis RW, Roberts PM (1987) Finite element simulation of solidification problems. Appl Sci Res 44:61–92
Szczygiol N (1997) Równania krzepnięcia w ujęciu metody elementów skończonych. Solidif Met Alloy 30:221–232
Voller VR, Swaminathan CR, Thomas BG (1990) Fixed grid techniques for phase change problems: a review. Int J Numer Methods Eng 30:875–898
Pietrzyk M (1992) Metody numeryczne w przerobce plastycznej metali. AGH, Krakow
Zhu MF, Hong CP (2001) A modified cellular automaton model for the simulation of dendritic growth in solidification of alloys. ISIJ Int 41:436–445
Gandin ChA, Rappaz M (1994) A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes. Acta met mater 42:2233–2246
Rappaz M, Gandin ChA, Desbiolles JL et al (1996) Prediction of grain structures in various solidification processes. Metall Mater Trans 27A:695–705
Gandin ChA, Rappaz M (1997) A 3D cellular automaton algorithm for the prediction of dendritic grain growth. Acta Mater 45:2187–2195
Gandin ChA, Desbiolles JL, Rappaz M et al (1999) A three-dimensional cellular automaton–finite element model for the prediction of solidification grain structures. Metall Mater Trans 30A:3153–3165
Brown SGR, Brucet NB (1995) Three-dimensional cellular automaton models of microstructural evolution during solidification. J Mater Sci 30:1144–1150
Madej L (2010) Development of the modelling strategy for the strain localization simulation based on the digital material representation. AGH, Krakow
Biscuola VB, Martorano MA (2010) Micro-macroscopic coupling in the cellular automaton model of solidification. Mat Res 13:479–484
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Hojny, M. (2017). Spatial Solutions Based on the Finite Element Method. In: Modeling Steel Deformation in the Semi-Solid State. Advanced Structured Materials, vol 47. Springer, Cham. https://doi.org/10.1007/978-3-319-40863-7_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-40863-7_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-40861-3
Online ISBN: 978-3-319-40863-7
eBook Packages: EngineeringEngineering (R0)