Abstract
A significant amount of tailings with a high content of cyanide or sulphur arises from the beneficiation process of metallic mines such as gold, silver, copper, and lead. The influence of these hazardous tailings on the environment may have multiple aspects. The control and configuration of this kind of environmentally dangerous tailings in terms of isolation at disposal site, construction of impermeable layers, transportation from plant, stabilization, safety, their effects on water, and soil quality are the main parameters that could be considered carefully. In this context, tailings management are very important to selection of the optimum disposal method. Also, the some parameters such as physical and chemical characterization of tailings, properties of newly formed material (e.g. acid potential, stabilization, cost and applicability of the paste tailings etc.) should be evaluated. Safely disposal of mine tailings under surface conditions is of great importance in the aspect of environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Amaratunga LM, Yaschyshyn DN (1997) Development of a high modulus paste fill using fine gold mill tailings. Geotech Geol Eng 15(3):205–219
Bascetin A, Tuylu S, Sertabipoglu Z, Adiguzel D, Binen IS (2012) The study of geotechnical parameters for paste technologies: a general review. In: SME annual meeting, Preprint 12–055, Feb. 19–22, 2012, Seattle
Bascetin A, Tuylu S, Adiguzel D, Akkaya U, Binen IS (2013) Investigation of suitability of Pb-Zn mine tailings for surface paste disposal. 23rd World Mining Congress, Montreal, CANADA, 11–15 August 2013, Paper 301
Bascetin A, Tuylu S, Adiguzel D, Akkaya UG (2014) The study of surface paste disposal technology for Pb-Zn mine tailings. In: SME annual meeting, Preprint 14–020, Feb. 23–26, 2014, Salt Lake City
Bascetin A, Tuylu S, Adıguzel D, Ozdemir O (2016) New technologies on mine process tailing disposal. J Geol Resour Eng 2(2016):63–72
Belem T, Bussière B, Benzaazoua M (2001) The effect of microstructural evolution on the physical properties of paste backfill. Tailings and Mine Waste ‘01 2001 Balkema, Rotterdam, ISBN 90 5809 182, p 365–374
Benzaazoua M, Bussiere B, Kongolo M, McLaughlin J, Marion P (2000) Environmental desulphurization of four Canadian mine tailings using froth flotation. Int J Miner Process 60(2000):57–74
Benzaazoua M, Belem T, ve Bussiere B (2002) Chemical factors that influence the performance of mine sulphidic paste backfill. Cem Concr Res 32:1133
Benzaazoua M, Fall M, Belem T (2004a) A contribution to understanding the hardening process of cemented pastefill. Miner Eng 17(2004):141–152
Benzaazoua M, Perez P, Belem T, Fall M (2004b) A laboratory study of the behaviour of surface paste disposal. In: Proceedings of the 8th international symposium on mining with backfill, Beijing, China, September 19–21, p 180–192
Blight GE, Bentel GM (1983) The behaviour of mine tailings during hydraulic deposition. J S Afr Inst Min Metall 83:73–86
Brackebusch FW (1994) Basics of paste backfill systems. Mining Eng 46(10):1175–1178
Brackebusch FW (1997) Mineral processing tailings disposal. US Patent 5,636,942. Jun. 10, 1997
Brzezinski LS (2001) Surface disposal of thickened tailings. Mining Environ Manage 9(5):7–12
Bussiere B (2007) Colloquium 2004: hydro-geotechnical properties of hard rock tailings from metal mines and emerging geo-environmental disposal approaches. Canadian Geotech J 44:1019–1052
Cincilla W, Landriault D, Verburg R (1997) Application of paste technology to surface tailings disposal of mineral wastes. In: Proceedings of the 4th international symposium on tailings and mine waste. A.A. Balkema, Vail, Fort Collins, p 343–356
Crowder, J., Grabinsky, M., Landriault, D., 2000. Consolidation testing and SEM images of tailings pastes for surface disposal. In: Proceedings of the 53th Canadian geotechnical conference, Montreal, p 625–632
Crowder J, Grabinsky M, Klein K (2002) Laboratory characterization of tailings paste for surface disposal. In: Proceedings of the 55th Canadian geotechnical conference, Niagara Falls, Ontario, p 401–409
Dagenais A, Aubertin M, Bussière B, Martin V (2005) Large scale applications of covers with capillary barrier effects to control the production of acid mine drainage. Post-Mining 2005, November 16–17, Nancy, France
Das R, Choudhury I (2013) Waste management in mining industry. Indian J Sci Res 4(2):139–142
Deschamps T, Benzaazoua M, Bussière B, Aubertin M, Belem T (2008) Microstructural and geochemical evolution of paste tailings in surface disposal conditions. Miner Eng 21:341–353
Deschamps T, Benzaazoua M, Bussière B, Aubertin M (2011) Laboratory study of surface paste disposal for sulfidic tailings: Physical model testing. Miner Eng 24(2011):794–806
EPA (1983) Design manual: neutralization of acid mine drainage. Environmental Protection Agency Office of Research and Development Industrial Environmental Research Laboratory, US, EPA-600/2–83-001, January 1983
EPA (1994) Technical document, acid mine drainage prediction. Environmental Protection Agency Office of Solid Waste Special Waste Branch, US, EPA530-R94–036, NTIS PB94–201829, December 1994
Fall M, Adrien D, Célestin JC, Pokharel M, Touré M (2009) Saturated hydraulic conductivity of cemented paste backfill. Miner Eng 22(2009):1307–1317
FLSmidth Brochure (2010) EIMCO® Deep Cone® Paste thickeners. www.flsmidth.com, Revision 10/05/2010, Minerals Processing Technology Center FLSmidth Salt Lake City, Inc. 7158 S. FLSmidth Drive Midvale, UT
Gitari WM, Petrik LF, Etchebers O, Key DL, Iwuoha E, Okujeni C (2008) Passive neutralization of acid mine drainage by fly ash and its derivatives: a column leaching study. Fuel 87:1637–1650
Grabinsky, M.W., Theriault, J., Welch, D., 2002. An overview of paste and thickened tailings disposal on surface. In: Proceedings of the first symposium on mine waste and environment, Rouyn-Noranda, Quebec, p 5–12
Henriquez J, Simms P (2009) Dynamic imaging and modelling of multilayer deposition of gold paste tailings. Miner Eng 22(2009):128–139
Kesimal A, Yılmaz E, Erçıkdı B, Alp İ, Yumlu M, ve Özdemir B (2002) Laboratory testing of cemented paste backfill. Madencilik 41(4):11–20
Kesimal A, Erçikdi B, Yilmaz E (2003) The effect of desliming by sedimentation on paste backfill performance. Miner Eng 16(2003):1009–1011
Kwak M, James DF, Klein KA (2005) Flow behaviour of tailings paste for surface disposal. Int J Miner Process 77(2005):139–153
Landriault DA, Cincilla WA, Gowan MJ, Verburg RBM (1997) Paste disposal—the future of tailings management practice. In: Proceedings of the second international conference on mining and industrial waste management, Johannesburg, South Africa, p 1–15
Landriault DA, Welch D, Frostiak J, Evans D (2001) Bulyanhulu mine: blended paste backfill and surface paste deposition: the state of the art in paste technology. In: Proceedings of the seventh international symposium on mining with backfill, Seattle, p 1–14
Lawrence RW, Scheske M (1997) A method to calculate the neutralization potential of mining wastes. Environ Geol 32(2):100–106
Leduc M, Smith ME (2003). Tailings co-disposal: innovations for cost savings and liability reduction. Vector Engineering, Inc.: 9
Levens RL, Marcy AD, Boldt CMK (1996) Environmental impacts of cemented mine waste backfill. Report of Investigations 9599, United States Department of the Interior and Bureau of Mines, p 1–22, ISSN 1066–5552
Martin V, Aubertin M, McMullen J (2006) Surface disposal of paste tailings. In: Proceedings of the 5th ICEG environmental geotechnics: opportunities, challenges and responsibilities for environmental geotechnics, vol. 2. Cardiff, p 1471–1478
McGregor RG, Blowes DW (2002) The physical, chemical and mineralogical properties of three cemented layers within sulfide-bearing mine tailings. J Geochem Explor 76(2002):195–207
Meggyes T, Debreczeni A (2006) Paste technology for tailings management. Land Contamin Reclamation 14(4):815–827
MMSD (2002) (Mining, Minerals and Sustainable Development) Mining for the future Appendix A: large volume waste working paper. April 2002, No:31, p 18–19
Mohamed AMO, Hossein M, Hassani FP (2002) Hydro-mechanical evaluation of stabilized mine tailings. Environ Geol 41:749–759
Morin KA, Hutt NM (2006) Conversion of minerals into neutralization potentials with units of CaCO3 equivalent, MDAG.com. Internet Case Study #20
Morin KA, Hutt NM (2007) Morrison project—prediction of metal leaching and acid rock drainage, Phase 1. Report by the Minesite Drainage Assessment Group (MDAG), March 23, 2007
Newman P (2003) Paste, the answer to dam problems. Int J Mater World 11(3):24–26
Newman P, Cadden A, White R (2001) Paste—the future of tailings disposal? Securing the future. In: International conference on mining and the environment. June 25–July 1, Skelleftea, Sweden, p 594–603
Ouellet J, Benzaazoua M, Servant S (1998) Mechanical, mineralogical and chemical characterization of a paste backfill. Tailings and Mine Waste’98, Colorado, p 139–146
Ouellet S, Bussiere B, Mbonimpa M, Benzaazoua M, Aubertin M (2006) Reactivity and mineralogical evolution of an underground mine sulphidic cemented paste backfill. Miner Eng 19(2006):407–419
Pullum L (2003) Pipeline performance. 2003 international seminar on paste and thickened tailings, 14–16 May 2003, Melbourne, Section 8, p 1–13
Rescan™ (2009) Environmental Services Ltd. (Proj. #0793–001-02). Appendix 15, Prediction of metal leaching and acid rock drainage, Phase 1 (Part 1). Metal leaching and acid rock drainage characterization report. Pacific Booker Minerals, Inc., Report Version D.1, September 2009
Ritcey GM (2005) Tailings management in gold plants. Hydrometallurgy 78(2005):3–20
Robinsky EI (1999) Thickened tailings disposal in the mining industry. E.I. Robinsky Associates Ltd., Toronto, 210p
Simms P, Grabinsky MW, Zhan G (2007) Modelling evaporation of paste tailings from the Bulyanhulu mine. Can Geotech J 44(12):1417–1432
Snyder KA, Feng X, Keen BD, Mason TO (2003) Estimating the electrical conductivity of cement paste pore solutions from OH−, K+ and Na+ concentrations. Cem Concr Res 33(6):793–798
Sparks JP, Campbell GS, Black RA (2001) Water content, hydraulic conductivity, and ice formation in winter stems of Pinus contorta: a TDR case study. Oecologia 127:468–475. doi:10.1007/s004420000587
Tenbergen RA (2000) Paste dewatering techniques and paste plant circuit design. Tailings and Mine Waste 2000, Balkema, Rotterdam, p 75–84
Theriault J, Frostiak J, Welch D (2003) Surface disposal of paste tailings at the Bulyanhulu gold mine. In: Proceedings of the 2nd mining environment conference, Sudbury, Ontario, p 1–8
Tuylu S (2016) Determination of optimum design specifications for surface paste tailings disposal. Ph.D. Thesis, Advisor Prof. Dr. Atac Bascetin and Co-Advisor Prof. Dr. Mostafa Benzaazoua, Istanbul University Institute of Science
Verburg RB (2001) Use of paste technology for tailings disposal: potential environmental benefits and requirements for geochemical characterization. IMWA Symposium
Verburg RBM (2002) Paste technology for disposal of acid-generating tailings. Mining Environ Manage 13(7):14–18
Verburg R, Newman B, Fordham PM (2006) Surface paste disposal of high-sulfide tailings—field cell monitoring and pilot plant testing. In: 7th international conference on acid rock drainage (ICARD), March 26–30, Published by the American Society of Mining and Reclamation (ASMR), 3134 Montavesta Road, Lexington, KY 40502, 2170–2187
Vogt C (2012) International assessment of marine and riverine disposal of mine tailings. Secretariat, London Convention/London Protocol International Maritime Organization (IMO) London, England &United Nations Environment Programme-Global Program of Action, November 30, 2012
Vogt C (2013) International assessment of marine and riverine disposal of mine tailings (Full Report), November 2013
Wickland BE, Wilson GW, Wijewickreme D, Klein B (2006) Desing and evaluation of mixtures of mine waste rock and tailings. Can Geotech J 43:928–945
Yilmaz E (2010) A field investigation of the behaviour of fine-grained, sulphide-rich paste tailings under a surface disposal condition. Post-Doc Project Final Report, Université du Québec en Abitibi-Témiscamingue (UQAT), 2010, Canada
Yilmaz E (2015) Environmental characterization of surface paste disposal. LAP LAMBERT Academic Publishing, ISBN: 978–3–659-36697-0, Saarbrucken, Deutschland/Germany
Yilmaz E, Benzaazoua M, Bussière B, Pouliot S (2014) Influence of disposal configurations on hydrogeological behaviour of sulphidic paste tailings: a field experimental study. Int J Miner Process 131:12–25
Zou DH, Sahito W (2004) Suitability of mine tailings for shotcrete as a ground support. Canad J Civil Eng 31(4):632–636
Acknowledgements
This work was supported the Scientific and Technological Research Council of Turkey (Project Numbers: 116M721) and also by the Executive Secretariat of Scientific Research Projects of Istanbul University Project Numbers: 40376, 19062, 21527, and 27845. The authors are grateful to the Scientific and Technological Research Council of Turkey and the Executive Secretariat of Scientific Research Projects of Istanbul University.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Bascetin, A., Tuylu, S., Adiguzel, D., Ozdemir, O. (2017). Field Properties and Performance of Surface Paste Disposal. In: Yilmaz, E., Fall, M. (eds) Paste Tailings Management. Springer, Cham. https://doi.org/10.1007/978-3-319-39682-8_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-39682-8_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-39680-4
Online ISBN: 978-3-319-39682-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)