Abstract
In this chapter, electric steelmaking is introduced with a short review: share, raw materials, operation, typical equipment, off-gas treatment, emissions. Electric-based steelmaking enjoys a much comfortable position than integrated classical blast furnace—oxygen steelmaking facilities, regarding greenhouse emissions. This is compared both for regions and for the world. For instance, the mostly EAF-based NAFTA countries are nowadays the region where the production of steel generates lower specific emissions. This said (and detailed), the chapter continues with a discussion of the CO2 emissions of the electric arc furnaces. A reference is be made to the use of alternative raw materials, as DRI/HBI, pig iron and hot metal. In relation with the EAF design, factors to be analyzed are the effects of different furnace designs on emissions: conventional, twin shell, conveyor scrap preheating, and shaft scrap preheating are considered. The use of chemical energy is reviewed, as well as the effect of an external factor: how electric energy is generated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Climate Leaders (2003) Direct emissions form iron and steel production. Climate leaders greenhouse gas inventory protocol core module guidance
EPA Office of Air and Radiation (2012) Available and emerging technologies for reducing greenhouse gas emissions from the iron and steel industry, pp 1–78
International Energy Agency (2012) Energy technology perspectives 2012 – pathways to a clean energy system
Jones JAT, Bowman B, Lefrank PA (1998) Chapter 10, Electric furnace steelmaking in The Making, Shaping and Treating of the Steel, The AISE Steel Foundation, Pittsburgh, USA
Laplace Conseil (2013) Impacts of energy market developments on the steel industry. In: 74th Session of the OECD Steel Committee, Paris, France, July 2013
Lüngen H-B et al (2013) Measures to increase efficiency and to reduce CO2 emissions in iron and steelmaking in Germany and Europe. In: AISTech 2012 Proceedings, 2012, pp 109–119
Madias J (2014) Electric Furnace steelmaking in Treatise on Process Metallurgy – Industrial Processes part A, Elsevier, Amsterdam, The Netherlands
Memmoli F, Guzzon M, Giavani C (2012) Iron & steel technology, vol 9, pp 70–78
Mendes de Paula G (2013) Controversial forecast – IEA conclusion of electric steelmaking explaining more than 50% of steel production generates controversy. Revista ABM – Metalurgia, Materiais e Mineração, Jan/Feb, pp 21 (in Portuguese)
Pardo N, Moya JA, Vatopoulos K (2012) Prospective scenarios on energy efficiency and CO2 emissions in the EU Iron & Steel Industry. Joint Research Centre, Report EUR 25543 EN
Reimink H (2015) Benchmarking systems designed for improvement. Worldsteel presentation
Thomson MJ, Evenson EJ, Kempe MJ, Goodfellow HD (2000) Control of greenhouse gas emissions from electric arc furnace steelmaking: evaluation methodology with case studies. Ironmak Steelmak 27(4):273–278
Toulouesvski YN, Zinurov IY (2010) Innovation in electric arc furnaces – scientific basis for selection. Springer, Heidelberg, London New York, p 14
Worldsteel Association (2015) Steel statistical yearbook. Worldsteel Association, Brussels
Acknowledgments
The author gratefully acknowledges the helpful comments and suggestions of the reviewers, which have improved the presentation.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Madias, J. (2016). Electric Arc Furnace. In: Cavaliere, P. (eds) Ironmaking and Steelmaking Processes. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-39529-6_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-39527-2
Online ISBN: 978-3-319-39529-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)