Abstract
The steelmaking in the electric arc furnaces (EAFs) is in the category of industrial processes with high degree of pollution. In the air environmental factors are transferred the following dangerous substances: carbon oxides, sulphur dioxide, nitrogen oxides, volatile organic compounds, polychlorinated dibenzodioxins, polychlorinated dibenzofurans and particulate matter. This chapter presents the categories of dangerous emissions generated from the steelmaking in the EAFs; potential sources that generate the dangerous emissions from the steelmaking in the EAFs; generation mechanisms of dangerous emissions from the steelmaking in the EAFs; methods of minimizing the dangerous emissions from the steelmaking in the EAFs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Anderson DR, Fisher R (2002) Sources of dioxines in the United Kingdom: the steel industry and other sources. Chemosphere 46:371–381
Capitelli M, Ferreira CM, Gordiets BF, Osipov AI (2000) Plasma kinetics in atmospheric gases. Springer, Berlin
Cavaliere P, Perrone A (2015) Optimization of processing conditions leading to dangerous emissions in steelmaking plants. In: Engineering solutions for sustainability: materials and resources II, pp 93–102
Chang MB, Huang HC, Tsai SS, Chi KH, Chang-Chien GP (2006) Evaluation of the emission characteristics of PCDD/Fs from electric arc furnace. Chemosphere 62:1761–1773
Directive 2001/81/EC of the European Parliament and of the Council of 23 October 2001 on national emission ceilings for certain atmospheric pollutants
Drotloff H (2014) Reduction of emissions by chemical industry from the German emission control act to the Industrial Emission Directive (IED). Procedia Technol 12:637–642
Echterhof T, Gruber J, Pfeifer H (2011) Measurements and simulation of NOx formation in the electric arc furnace. In: 2nd international conference clean technologies in the steel industry, Budapest, Hungary, 26–28 September
Environmental Agency of London (1999) Process subjected to Integrated Pollution Control. IPC Guidance Note, Series 2 (S2), Metal Industry Sector, S2 2.01 Iron and Steel Making Processes, London. http://ea-lit.freshwaterlife.org/archive/ealit:1909. Accessed 15 November 2015
Eurofer (2007) Review of the EAF chapter of the current BREF. 42
European Community Directive 1999/13/EC (as amended by Directive 2004/42/CE and Directive 2008/112/EC) on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations
European Standard EN 1948-1:2006 Stationary source emissions – Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs – Part 1: sampling of PCDDs/PCDFs
European Union Directive 2010/75/EU of the European Parliament and the Council of 24 November 2010 on industrial emissions (Integrated Pollution Prevention and Control), Official Journal of the European Union
Greenwood NN, Earnshaw A (1997) Chemistry of the elements, 2nd edn. Elsevier, Amsterdam
Grochowalski C, Lassen M, Holtzer M, Sadowski M, Hudyma T (2007) Determination of PCDDs, PCDFs, PCBs and HCB emission from the metallurgical sector in Poland. Environ Sci Pollut Res Int 14:326–332
Guézennec AG, Huber JC, Patisson F, Sessiecq P, Birat JP, Ablitzer D (2005) Dust formation in electric arc furnace: birth of the particles. Powder Technol 157:2–11
Han Z, Holappa L (2003) Bubble bursting phenomenon in gas/metal/slag systems. Metall Mater Trans B 34:525–532
Huber JC (2000) La formation des poussières dans un Four Electrique d’Aciérie. Doctorate Thesis, INPL, France
Iluţiu-Varvara DA (2007a) The generation and transfer of pollutant substances in industrial processes (in Romanian). UT Press, Cluj-Napoca. Romania ISBN 978-973-662-344-8
Iluţiu-Varvara DA (2007b) Experimental researches regarding the constituted phases of the dusts exhausted during steelmaking in the electric arc furnace. Acta Technica Napocensis - Scientific Bulletin of the Technical University of Cluj-Napoca. Series: Machine Building. Materials 50:121–125
Iluţiu-Varvara DA (2009a) Study on generation mechanisms of nitrogen oxides (NOx) during the steelmaking. Acta Technica Napocensis - Scientific Bulletin of the Technical University of Cluj-Napoca. Series: Machine Building. Materials 52:86–88
Iluţiu-Varvara DA (2009b) Experimental research on nitrogen oxides (NOx) emissions generated from the steelmaking. Acta Technica Napocensis - Scientific Bulletin of the Technical University of Cluj-Napoca. Series: Machine Building. Materials 52:97–100
Iluţiu-Varvara DA (2009c) Experimental researches concerning the volatile organic compounds (VOCs) emissions to the steelmaking. Metalurgia Int 7:38–44
Iluţiu-Varvara DA (2010) Research about the greenhouse gases emissions from metallurgical processes. Environ Eng Manag J 6:813–818
Iluţiu-Varvara DA, Pică EM, Brânduşan L (2011) Assessment of air environmental factor pollution to the steelmaking. Bulletin of the Polytechnic Institute of Jassy, Construction. Architecture 3:113–118
Iluţiu-Varvara DA, Brânduşan L, Pică EM (2013) Researches regarding the air pollution with sulfur dioxide (SO2) to the steelmaking. Adv Eng Forum 8–9:115–126. doi:10.4028/www.scientific.net/AEF.8-9.115
Iluţiu-Varvara DA, Rădulescu D (2013) Assessment of air pollution with sulphur dioxide (SO2) to the electric arc furnaces. Stud Univ Babes-Bolyai Chem 2:143–150
Iluţiu-Varvara DA, Mârza CM, Sas-Boca IM, Ceclan VA (2015a) The assessment and reduction of carbon oxides emissions at electric arc furnaces-essential factors for sustainable development. Procedia Technol 19:402–409. doi:10.1016/j.protcy.2015.02.057
Iluţiu-Varvara DA, Brânduşan L, Arghir G, Pică EM (2015b) Research about the characterization of metallurgical slags for landfilled waste minimization. Environ Eng Manag J 14:2115–2126
Iluţiu-Varvara DA (2016) An assessment of pollution with polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) at steelmaking. Procedia Technol 22:445–451. doi:10.1016/j.protcy.2016.01.084
Iluţiu-Varvara DA, Mârza CM, Aciu C, Hădărean A, Domniţa FV, Sas-Boca IM, Mihu AM (2016) An assessment of pollution with volatile organic compounds in the electric arc furnaces. Procedia Technol 22:452–456. doi:10.1016/j.protcy.2016.01.086
Jha MK, Kumar V, Singh RJ (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resour Conserv Recycl 33:1–22
Li CL, Tsai MS (1993) Mechanism of spinel ferrite dust formation in electric arc furnace steelmaking. ISIJ Int 33:284–290
Lotun D, Pilon L (2005) Physical modeling of slag foaming for various operating conditions and slag compositions. ISIJ Int 45:835–840
Ma G, Garbers-Craig AM (2006) A review on the characteristics, formation mechanisms and treatment processes of Cr (VI)-containing pyrometallurgical wastes. J South Afr Inst Min Metall 106:753–763
Malikov GK, Lisienko VG, Malikov KY, Viskanta R (2002) A mathematical modeling and validation study of NOx emissions in metal processing systems. ISIJ Int 10:1175–1181
Negrea V, Sandu V (2000) Combating pollution in road transport (in Romanian). Technical Press, Bucharest
Rai PK (2015) Multifaceted health impacts of particulate matter (PM) and its management: an overview. Environ Skept Crit 4(1):1–26
Ryu JY, Mulholland JA, Chu B (2003) Chlorination of dibenzofuran and dibenzo-p-dioxin vapor by copper (II) chloride. Chemosphere 51:1031–1039
Sofilic T, Jendricko J, Kovacevic Z, Cosic M (2012) Measurement of polychlorinated dibenzo-p-dioxin and dibenzofuran emission from EAF steel making process. Arch Metall Mater 57:811–821
Stieglitz L, Vogg H, Zwick G, Beck J, Bautz H (1991) On formation conditions of organohalogen compounds from particulate carbon of fly ash. Chemosphere 23:1255–1264
Turkdogan ET (1996) Fundamental of steelmaking. The University Press, Cambridge
Tysklind M, Söderström G, Rappe C (1989) PCDD and PCDF emissions from scrap metal melting processes at a steel mill. Chemosphere 19:705–710
Unamuno I, Laraudogoitia JJ, Almeida SM (2008) Sidenor Basauri EAF emissions reduction through analysis and modeling. Arch Metall Mater 2:379–384
US Environmental Protection Agency (USEPA) (1988) Final BDAT background document for KO61. Washington, DC, August
Varvara DA (2006a) The problematic of pollution with dioxins and furans to the steelmaking in the electric arc furnace. Acta Technica Napocensis - Scientific Bulletin of the Technical University of Cluj-Napoca. Series: Machine Building. Materials 49:151–157
Varvara DA (2006b) The problematic of interphase transfer of pollutant substances to the steelmaking. Acta Technica Napocensis - Scientific Bulletin of the Technical University of Cluj-Napoca. Series: Machine Building. Materials 49:147–150
Varvara DA (2007a) Studies concerning the substances transfer between the steelmaking phases. PhD Thesis, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Varvara DA (2007b) Experimental researches about of the particulate matter emitted in the steelmaking process. Foundry J (Revista de Turnătorie) 7(8):12–16
Van den Berg M, Birnbaum LS, Denison M, De Vito M, Farland W, Feeley M, Fiedler H, Hakansson H, Hanberg A, Haws L, Rose M, Safe S, Schrenk D, Tohyama C, Tritscher A, Tuomisto J, Tysklind M, Walker N, Peterson RE (2006) The 2005 World Health Organization reevaluation of human and mammalian toxic equivalency factors for dioxins and dioxin-like compounds. Toxicol Sci 93:223–241
Warnatz J, Maas U, Dibble RW (1999) Combustion. Springer, Berlin
Wikstrom E, Marklund S (2000) Secondary formation of chlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, benzenes, and phenols during MSW combustion. Environ Sci Technol 34:604–609
Zeldovich Y, Barenblatt G, Librovich V, Makhviladze G (1985) The mathematical theory of combustion and explosions. Plenum Publishing Corporation, New York
Zeldovich Y, Frank-Kamenetskii D, Sadovnikov P (1947) Oxidation of nitrogen in combustion (M. Shelef Trans.). Academy of Sciences of USSR, Institute of Chemical Physics, Moscow-Leningrad
Acknowledgements
The authors also gratefully acknowledge the helpful comments and suggestions of the reviewers, which have improved the presentation.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Iluţiu-Varvara, DA. (2016). Dangerous Emissions During Steelmaking in Electric Arc Furnaces. In: Cavaliere, P. (eds) Ironmaking and Steelmaking Processes. Springer, Cham. https://doi.org/10.1007/978-3-319-39529-6_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-39529-6_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-39527-2
Online ISBN: 978-3-319-39529-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)