Abstract
In general machining of materials is a complex process involving several process and material parameters. During machining, multiple physical phenomena are associated with combination of these process and material parameters. These physical phenomenon may occur simultaneously or in sequence rendering the process of machining very complex.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
L. Zhang, B.L. Tai, G. Wang, K. Zhang, S. Sullivan, A.J. Shih, Med. Eng. Phys. 35(10), 1391 (2013)
B.L. Tai, L. Zhang, A.C. Wang, S. Sullivan, G. Wang, A.J. Shih, Med. Eng. Phys. 35(10), 1545 (2013)
J. Lee, Y. Rabin, O.B. Ozdoganlar, Med. Eng. Phys. 33(10), 1234 (2011)
S.R. Davidson, Heat transfer in bone during drilling, PhD Thesis, University of Toronto (1999)
S. Sezek, B. Aksakal, F. Karaca, Comput. Mater. Sci. 60, 13 (2012)
K. Alam, M. Khan, V.V. Silberschmidt, J. Med. Biol. Eng. 34(6), 618 (2014)
S. Li, Y.P. Chui, P.A. Heng, in 4th IEEE International Conference on Information Science and Technology (ICIST), 2014 (IEEE, 2014), pp. 569–573
A.S. Inamdar, Drilling in bone: modeling heat generation and temperature distribution by using HBIM, BTech Thesis, Indian Institute of Technology, Roorkee, India (2009)
M. Stańczyk, J. Telega, Acta Bioeng. Biomech. 4(2), 3 (2002)
M. Basiaga, Z. Paszenda, J. Szewczenko, M. Kaczmarek, Acta Bioeng. Biomech. 13(4), 29 (2011)
K. Alam, Experimental and numerical analysis of conventional and ultrasonically-assisted cutting of bone, PhD Thesis, Loughborough University, UK (2009)
Y. Wang, M. Cao, X. Zhao, G. Zhu, C. McClean, Y. Zhao, Y. Fan, Med. Eng. Phys. 36(11), 1408 (2014)
R. kumar Pandey, S. Panda, Procedia Eng. 51, 676 (2013). doi:10.1016/j.proeng.2013.01.096. http://www.sciencedirect.com/science/article/pii/S1877705813000970. Chemical, Civil and Mechanical Engineering Tracks of 3rd Nirma University International Conference on Engineering (NUiCONE2012)
S.S. Joshi, A.V. Gkriniari, S. Katakam, N.B. Dahotre, J. Phys. D: Appl. Phys. 48(49), 495501 (2015)
N.B. Dahotre, S. Santhanakrishnan, Laser-assisted machining (LAM) of hard tissues and bones (2014). US Patent App. 14/216,966
W.A. Lughmani, K. Bouazza-Marouf, I. Ashcroft, J. Mech. Behav. Biomed. Mater. 42, 32 (2015)
C. Santiuste, M. RodrÃguez-Millán, E. Giner, H. Miguélez, Compos. Struct. 116, 423 (2014)
K. Alam, A. Mitrofanov, V.V. Silberschmidt, Comput. Mater. Sci. 46(3), 738 (2009)
C. Plaskos, A.J. Hodgson, P. Cinquin, in Medical Image Computing and Computer-Assisted Intervention-MICCAI 2003 (Springer, Berlin, 2003), pp. 254–261
K. Alam, A. Mitrofanov, V.V. Silberschmidt, Int. J. Exp. Comput. Biomech. 1(3), 236 (2010)
M. Marco, M. RodrÃguez-Millán, C. Santiuste, E. Giner, M.H. Miguélez, J. Mech. Behav. Biomed. Mater. 44, 179 (2015)
M. Kutz, Standard Handbook of Biomedical Engineering and Design (McGraw-Hill, New York, 2003)
T.M. Keaveny, E.F. Morgan, O.C. Yeh, Standard Handbook of Biomedical Engineering and Design (McGraw-Hill, New York, 2004)
S. Li, A. Abdel-Wahab, E. Demirci, V.V. Silberschmidt, J. Biomech. 47(5), 1117 (2014)
M. Xiao, S. Karube, T. Soutome, K. Sato, Int. J. Mach. Tools Manuf. 42(15), 1677 (2002)
A.A. Abdel-Wahab, A.R. Maligno, V.V. Silberschmidt, Comput. Mater. Sci. 52(1), 128 (2012)
L. Vergani, C. Colombo, F. Libonati, Procedia Mater. Sci. 3, 1524 (2014)
A. Ural, S. Mischinski, Eng. Fract. Mech. 103, 141 (2013)
A. Ural, D. Vashishth, J. Biomech. 39(16), 2974 (2006)
I.S. Hage, R.F. Hamade, Procedia CIRP 8, 385 (2013)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Dahotre, N.B., Joshi, S.S. (2016). Computational Modeling in Bone Machining. In: Machining of Bone and Hard Tissues. Springer, Cham. https://doi.org/10.1007/978-3-319-39158-8_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-39158-8_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-39157-1
Online ISBN: 978-3-319-39158-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)