Abstract
Based on the surface curvature feature, the identification scheme is put forward for curvature of the free-form surface and the complex free surface, which is divided into large curvature and small curvature surface, and the graphic example is given to illustrate scheme effectiveness; Aimed at the trajectory optimization problem of spray gun of spraying-robot on complex free surface, the spray gun trajectory optimization model of different curvature surface is put forward to complete the trajectory optimization on the free surface. Combined with the least square approximation and topology element meshing techniques, the trajectory optimization problem of the intersecting area of two patches of different curvature will be turned into the trajectory optimization problem of the intersecting area of a similar natural quadric patch and an approximate plane patch. Then the trajectory optimization evaluation function model is set up, which verifies the proposed scheme effectiveness by simulation results.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hyotyiemi H (1990) Minor move-global results: robot trajectory planning. In: Proceeding of the IEEE international conference on decision and control. Honolulu, pp 16–22
Suh SH, Woo IK, Noh SK (1991) Development of an automatic trajectory planning system (ATPS) for spray painting robots. In: 1991 IEEE international conference on robotics and automation, 1991. Proceedings. IEEE, pp 1948–1955
Tokunaga H, Okano T, Matsuki N et al (2004) A method to solve inverse kinematics problems using lie algebra and its application to robot spray painting simulation. In: ASME international design engineering technical conferences and computers and information in engineering conference. American Society of Mechanical Engineers, pp 85–91
Sheng W, Xi N, Song M et al (2000) Automated CAD-guided robot path planning for spray painting of compound surfaces. In: 2000 IEEE/RSJ international conference on intelligent robots and systems, 2000. (IROS 2000). Proceedings, vol 3. IEEE, pp 1918–1923
Sheng W, Xi N, Chen H et al (2003) Surface partitioning in automated CAD-guided tool planning for additive manufacturing. In: 2003 IEEE/RSJ international conference on intelligent robots and systems, 2003. (IROS 2003). Proceedings, vol 2. IEEE, pp 2072–2077
Sheng W, Chen H, Xi N et al (2005) Tool path planning for compound surfaces in spray forming processes. IEEE Trans Autom Sci Eng 2(3):240–249
Chen H, Sheng W, Xi N et al (2002) CAD-based automated robot trajectory planning for spray painting of free-form surfaces. Ind Robot: Int J 29(5):426–433
Chen H, Xi N, Sheng W et al (2004) Optimal spray gun trajectory planning with variational distribution for forming process. In: 2004 IEEE international conference on robotics and automation, 2004. Proceedings. ICRA’04, vol 1. IEEE, pp 51–56
Chen H, Xi N, Sheng W et al (2005) General framework of optimal tool trajectory planning for free-form surfaces in surface manufacturing. J Manuf Sci Eng 127(1):49–59
Wei C, Dean Z (2009) Tool trajectory optimization of robotic spray painting. In: Second international conference on intelligent computation technology and automation, (2009) ICICTA’09, no. 3. IEEE, pp 419–422
Zeng Y, Gong J (2010) Optimizing material distribution for complex curved surface in integrated trajectory optimization of spray painting processes. In: 2010 international conference on electrical and control engineering (ICECE). IEEE, pp 1444–1448
Zeng Y, Gong J (2010) The trajectory optimization of spray painting robot for conical surface. Adv Mater Res 139:2189–2194
Wei C, Dean Z, Yang T (2008) Trajectory optimization on robotic spray painting of free-form surfaces. Trans Chin Soc Agric Mach 39(1):147–150 [in Chinese]
Jun G, Yong Z (2009) New models of spray gun and simulation in spray painting. Mach Des Manuf 10:106–108 [in Chinese]
Yong Z, Jun G (2011) Trajectory optimization of spray painting robot for natural quadric surfaces. China Mech Eng 22(3):282–290 [in Chinese]
Youdong C, Xiaodong L, Hongxing W (2012) Trajectory planning based on latitude for painting on spherical surface. In: 2012 10th IEEE International conference on industrial informatics (INDIN). IEEE, pp 431–435
Chen W, Zhao D (2013) Path planning for spray painting robot of workpiece surfaces. Hindawi Publ Corp Math Probl Eng 6:451–457
Acknowledgments
This project is supported by National Natural Science Foundation of China (Grant no. 51165022) and Natural Science Foundation of Gansu Province (Grant no. 145RJZA028)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Peng, Z., Huifeng, N., Jun, G., Lina, W. (2017). The Trajectory Optimization of Spray Gun for Spraying Painting Robot Based on Surface Curvature Properties. In: Balas, V., Jain, L., Zhao, X. (eds) Information Technology and Intelligent Transportation Systems. Advances in Intelligent Systems and Computing, vol 454. Springer, Cham. https://doi.org/10.1007/978-3-319-38789-5_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-38789-5_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-38787-1
Online ISBN: 978-3-319-38789-5
eBook Packages: EngineeringEngineering (R0)