Abstract
The paper describes conceptual design and control strategies for a new fully autonomous lower limb exoskeleton system. The main advantage of the system is its ability to decouple the weight/mass carrying function of the system from its forward motion function to reduce power consumption, weight and size of the propulsion motors. An efficient human machine interface has been achieved by means two sets of sensors: one (flexible sensors) to monitor subject leg’s shank and ankle movements and the second to monitor subject’s foot pressure. The weight is supported by a couple of passive pneumatic cylinders with electronically controlled ports. Joint motors of the exoskeleton then are only left to timely drive links of the exoskeleton when the legs take step. Therefore, motors consume less electrical energy and are small in size. In contrast to other existing exoskeleton designs, the motor batteries are able to sustain the energy supply for a longer travel distance before discharging.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Banala, S., Agrawal, S., & Scholz, J. (2009). Robot assisted gait training with active leg exoskeleton (ALEX). IEEE Transactions on Neural Systems and Rehabilitation Engineering, 17, 2–8.
De Santis, A., Siciliano, B., De Luca, A., & Bicchi, A. (2008). An atlas of physical human-robot interaction. Mechanisms and Machines Theory, 43, 253–270.
Ghan, J., & Kazerooni, H. (2006). System identification for the Berkeley lower extremity exoskeleton (BLEEX). In Proceedings 2006 IEEE International Conference on Robotics and Automation (ICRA), pp. 3477–3484.
Heng, C., Jun, Z., Chunming, X., Hong, Z., Xiao, C., & Yu, W. (2010). Design and control of a hydraulic-actuated leg exoskeleton for load-carrying augmentation. In Proceedings 2006 IEEE International Conference on Robotics and Automation (ICRA), Part I, LNAI 6424, pp. 590–599.
Heng, C., Zhengyang, L., Jun, Z., Yu, W., Wei, W. (2009). Design frame of a leg exoskeleton for load-carrying augmentation. In Proceedings of IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 426–431.
Ikeuchi, Y., Ashihara J., Hiki Y., Kudoh H., & Noda T. (2009). Walking assist device with bodyweight support system. In Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4073–4079.
Iqbal, J., & Baizid, K. (2015). Stroke rehabilitation using exoskeleton-based robotic exercisers mini review. Biomedical Research, 26(1), 197–201.
Jamwal, P. K., Sheng, Q. X., Shahid, H., & John, G. P. (2014). An adaptive wearable parallel robot for the treatment of ankle injuries. IEEE/ASME Transactions on Mechatronics, 19(1), 64–75.
Jezernik, S., Colombo, G., Keller, T., Frueh, H., & Morari, M. (2003). Robotic orthosis lokomat: A rehabilitation and research tool. Neuromodulation, 6, 108–115.
Kao, P., & Ferris, D. P. (2009). Motor adaptation during dorsiflexion-assisted walking with a powered orthosis. Gait Posture., 29, 230–236.
Kasaoka, K., & Sankai, Y. (2001). Predictive control estimating operator’s intention for stepping-up motion by exo-skeleton type power assist system HAL. In Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1578–1583.
Kawabata, T., Satoh, H., & Sankai, Y. (2009). Working posture control of robot suit HAL for reducing structural stress. In Proceedings of IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 2013–2018.
Kawamoto, H., & Sankai, Y. (2002). Comfortable power assist control method for walking aid by HAL-3. In Proceedings of IEEE International Conference on Systems, Man and Cybernetics, pp. 6–12.
Kawamoto, H., & Sankai, Y. (2005). Power assists method based on phase sequence and muscle force condition for HAL. Journal of Advanced Robotics, 19(7), 717–734.
Kazerooni, H., Steger, R., & Huang, L. (2006). Hybrid control of the Berkeley lower extremity exoskeleton (bleex). The International Journal of Robotics Research, 25(5–6), 561–573.
Leslie, M. (2012). The next generation of exoskeletons. A Magazine of the IEEE Engineering in Medicine and Biology Society, 3(4), 56–61.
Mao, Y., & Agrawal, S. K. (2012). Design of a cable driven arm exoskeleton (CAREX) for neural rehabilitation. IEEE Transactions on Robotics, 28(4), 922–931.
Pons, J. L. (2008). Wearable robots: Bio-mechatronic exoskeletons. Hoboken, NJ, USA: Wiley.
Suzuki, K., Mito, G., Kawamoto, H., Hasegawa, Y., & Sankai, Y. (2007). Intention-based walking support for paraplegia patients with robot suit HAL. Advanced Robotics, 21, 1441–1469.
Veneman, J. F., Kruidhof, R., Hekman, E. E., Ekkelenkamp, R., van der Van Asseldonk, E. H., & Kooij, H. (2007). Design and evaluation of the LOPES exoskeleton robot for interactive gait rehabilitation. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 15, 379–386.
Vukobratovic, M., Hristic, D., & Stojiljkovic, Z. (1974). Development of active anthropomorphic exoskeletons. Journal of Medical and Biological Engineering and Computing, 12(1), 66–80.
Walsh, C.J., & Paluska, D. (2006). Development of a lightweight, underactuated exoskeleton for load-carrying augmentation. In Proceedings of IEEE International Conference on Robotics and Automation (ICRA), pp. 3485–3491.
Zoss, A. B., Kazerooni, H., & Chu, A. (2006). Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX). IEEE/ASME Transactions on Mechatronics, 11(2), 128–138.
Acknowledgments
The project is financially supported by the grant of the Corporate Fund “Fund of Social Development”.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing Switzerland
About this paper
Cite this paper
Mir-Nasiri, N. (2017). Conceptual Design of Energy Efficient Lower Extremity Exoskeleton for Human Motion Enhancement and Medical Assistance. In: Zhang, D., Wei, B. (eds) Mechatronics and Robotics Engineering for Advanced and Intelligent Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-33581-0_22
Download citation
DOI: https://doi.org/10.1007/978-3-319-33581-0_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-33580-3
Online ISBN: 978-3-319-33581-0
eBook Packages: EngineeringEngineering (R0)