Abstract
Additive manufacturing (AM) presents a very different set of design challenges to traditional manufacturing. Layer-wise building brings about issues with residual stresses and support requirements which lead to failures during processing of poorly-designed parts. Additionally, there is a need for post-processing due to poor part quality, which adds another process to the chain with its own unique design limitations. This paper discusses the issues surrounding designing for AM and the subsequent post-processing. A future vision is proposed for the selection of post-processes and the relative design adjustments to accommodate the chosen techniques. A decision tree is presented as a framework for process selection based on part requirements. Although at present, the data necessary to realize this vision is incomplete, with further research into the capabilities and design constraints of different post-processes, this approach could provide a systematic method for integrating design for post-processing with AM design.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Wohlers, T.T.: Wohlers report 2014: 3D printing and additive manufacturing state of the industry annual worldwide progress report., 19th ed. Fort Collins, CO: Wohlers Associates, Inc., (2014)
Yadroitsev, I., Krakhmalev, P., Yadroitsava, I.: Hierarchical design principles of selective laser melting for high quality metallic objects. Addit. Manuf. 7, 45–56 (2015)
Pyka, G., Kerckhofs, G., Papantoniou, I., Speirs, M., Schrooten, J., Wevers, M.: Surface roughness and morphology customization of additive manufactured open porous Ti6Al4 V structures. Mater. (Basel) 6(10), 4737–4757 (2013)
Manogharan, G., Wysk, R., Harrysson, O., Aman, R.: AIMS- a metal additive-hybrid manufacturing system : system architecture and attributes. In: 43rd Proceedings of the North American Manufacturing Research Institution of SME, pp. 1–14 (2015)
Vrancken, B., Thijs, L., Kruth, J.P., Van Humbeeck, J.: Heat treatment of Ti6Al4 V produced by selective laser melting: microstructure and mechanical properties. J. Alloys Compd. 541, 177–185 (2012)
Farayibi, P.K., Abioye, T.E., Murray, J.W., Kinnell, P.K., Clare, A.T.: Surface improvement of laser clad Ti–6Al–4 V using plain waterjet and pulsed electron beam irradiation. J. Mater. Process. Technol. 218, 1–11 (2015)
Kim, T.B., Yue, S., Zhang, Z., Jones, E., Jones, J.R., Lee, P.D.: Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks. J. Mater. Process. Technol. 214(11), 2706–2715 (2014)
Strano, G., Hao, L., Everson, R.M., Evans, K.E.: Surface roughness analysis, modelling and prediction in selective laser melting. J. Mater. Process. Technol. 213(4), 589–597 (2013)
Kranz, J., Herzog, D., Emmelmann, C.: Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. J. Laser Appl. 27(S1), S14001 (2015)
Brandt, M., Sun, S.J., Leary, M., Feih, S., Elambasseril, J., Liu, Q.C.: High-Value SLM aerospace components: from design to manufacture. Adv. Mater. Res. 633, 135–147 (2013)
Uhlmann, P.E., Rethmeier, P.M., Graf, B., Kersting, R., Bergmann, A.: Flexible manufacturing with an additive process chain design, production and surface finish. In: Achieving Precision Tolerances in Additive Manufacturing. ASPE Spring Topical Meeting, pp. 5–9 (2015)
Spierings, A.B., Starr, T.L., Wegener, K.: Fatigue performance of additive manufactured metallic parts. Rapid Prototyp. J. 19(2), 88–94 (2013)
Löber, L., Flache, C., Petters, R., Kühn, U., Eckert, J.: Comparison of different post processing technologies for SLM generated 316 l steel parts. Rapid Prototyp. J. 19(3), 173–179 (2013)
Beaucamp, A.T., Namba, Y., Charlton, P., Arthur, A.: Finishing of Electron Beam Melted Titanium (Ti6Al4 V) Using Shape Adaptive Grinding Tools, ASPE Spring Meet. - Addit. Manuf. Berkeley, Calif., (2014)
Cheema, M.S., Venkatesh, G., Dvivedi, A., Sharma, A.K.: Developments in abrasive flow machining: a review on experimental investigations using abrasive flow machining variants and media. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 226(12), 1951–1962 (2012)
Bergmann, C., Schmiedel, A.: Postprocessing of selective laser melting components using abrasive flow machining and cleaning. Int. Addit. Manuf. Symp. (2013)
Lamikiz, A., Sánchez, J.A., López de Lacalle, L.N., Arana, J.L.: Laser polishing of parts built up by selective laser sintering. Int. J. Mach. Tools Manuf. 47, 12–13, pp. 2040–2050 (2007)
Okada, A., Uno, Y., Uemura, K., Raharjo, P.: Surface Modification for Orthopaedic Titanium Alloy by Wide- Area Electron Beam. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 221, 173–178 (2015)
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., Wevers, M.: Surface modification of Ti6Al4 V open porous structures produced by additive manufacturing. Adv. Eng. Mater. 14(6), 363–370 (2012)
Acknowledgements
The authors are pleased to thank the Engineering and Physical Science Research Council (EPSRC No. EP/L505341/1) and our industrial partner for their support during this research.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Gordon, E.R., Shokrani, A., Flynn, J.M., Goguelin, S., Barclay, J., Dhokia, V. (2016). A Surface Modification Decision Tree to Influence Design in Additive Manufacturing. In: Setchi, R., Howlett, R., Liu, Y., Theobald, P. (eds) Sustainable Design and Manufacturing 2016. SDM 2016. Smart Innovation, Systems and Technologies, vol 52. Springer, Cham. https://doi.org/10.1007/978-3-319-32098-4_36
Download citation
DOI: https://doi.org/10.1007/978-3-319-32098-4_36
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32096-0
Online ISBN: 978-3-319-32098-4
eBook Packages: EngineeringEngineering (R0)