Abstract
The wing leading edge and trailing edge high lift system is essential for the low speed characteristics of the aircraft. Advanced CFRP technology can contribute to cost and weight savings on aircraft level as well as to improved low speed performance and added product value for the aircraft operator. In this case study, different CFRP flap design schemes and manufacturing technologies are discussed, pointing out the interdependence of CFRP material, design, manufacturing process and resulting part properties. Starting with the description of the reference flap design and the most relevant design targets, new solutions such as multi-spar and sandwich designs are characterised with their advantages and shortfalls. Advanced thermoset solutions (based on prepreg and resin infusion technology) and thermoplastic solutions (based on the tape laying technology) are included. Material and manufacturing as well as strength and stiffness aspects related to aerodynamic performance are analysed. In addition, wing integration challenges linked to new design schemes are discussed.
References
Prozesskette Hochauftrieb mit multifunktionalen Steuerflächen (ProHMS) BMBF Förderkennzeichen 20F0001C, 1.3.2000–31.12.2002, Zwischenbericht 31.12.2001
Breuer, U.P., Siemetzki, M.: Maßgeschneiderte CFK-Strukturen für innovative Hochauftriebshilfen. DGLR Conference Proceedings, DGLR-2002-097, DGLR Jahrbuch 2002, Band I, Deutscher Luft- und Raumfahrtkongress 2002, Stuttgart, 23. bis 26. Sept 2002
Bautz, B., Siemetzki, M., Law, B., Latrille, M.: Beitrag zur Entwicklung einer Landeklappe in Vielholmerbauweise. DGLR Conference Proceedings DGLR-2004-028, Deutscher Luft- und Raumfahrtkongress 2004, Dresden, Germany, 20. bis 23. Sept 2004
Siemetzki, M., Havar, T.-L., Breuer, U.P.: Structural development of mini-trailing-edge-devices in CFRP. SAMPE Europe Conference Proceedings, Paris, France, 1–3 Apr 2002
Gueuning, D., Mathieu, F.: Evolution in composite injection moulding processing for wing control surfaces. SAMPE Conference Proceedings, Sampe Europe 2015, Amiens, France, 15–17 Sept 2015
Author information
Authors and Affiliations
Rights and permissions
<SimplePara><Emphasis Type="Bold">Open Access</Emphasis> This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. </SimplePara> <SimplePara>The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.</SimplePara>
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Breuer, U.P. (2016). Flap Design Case Study. In: Commercial Aircraft Composite Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-31918-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-31918-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-31917-9
Online ISBN: 978-3-319-31918-6
eBook Packages: EngineeringEngineering (R0)