Abstract
The era of modern developments enhanced the technological advancements in all domains like medical, transportation, manufacturing, space and aviation, accounting, agriculture etc. The rule based and expert systems have proven their capabilities in all the well established and emerging domains. Manufacturing is one of the emerging fields, having major impact on global market. Rules and expert systems are mainly governed by knowledge, facts, empirical theorems etc. These systems are very useful to user for better prediction/approximation of the outputs. It also servers certain advantages like easy to operate, reduced human error, low and semi skilled person can handle etc. Here, a review has been done to converge and highlight the major applications of such systems for different manufacturing processes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Xie, S.Q., Liu, J.Q.: Integrated concurrent approach for compound sheet metal cutting and punching. Int. J. Prod. Res. 39(6), 1095–1112 (2001)
Ramana, K.V., Rao, P.V.M.: Automated manufacturability evaluation system for sheet metal components in mass production. Int. J. Prod. Res. 43(18), 3889–3913 (2005)
Giannakakis, T., Vosniakos, G.C.: Sheet metal cutting and piercing operations planning and tools configuration by an expert system. Int. J. Adv. Manuf. Technol. 36(7–8), 658–670 (2008)
Ghatrehnaby, M., Arezoo, B.: A fully automated nesting and piloting system for progressive dies. J. Mater. Process. Technol. 209(1), 525–535 (2009)
Kim, D.Y., Park, J.J.: Development of an expert system for the process design of axisymmetric hot steel forging. J. Mater. Process. Technol. 101(1–3), 223–230 (2000)
Kim, M.S., Choi, J.C., Kim, Y.H., Huh, G.J., Kim, C.: An automated process planning and die design system for Quasi-Axisymmetric cold forging products. Int. J. Adv. Manuf. Technol. 20(3), 201–213 (2002)
Ravi, R., Prasad, Y.V.R.K., Sarma, V.V.S.: Development of expert systems for the design of a hot-forging process based on material workability. J. Mater. Eng. Perfor. 12, 646–652 (2003)
Ohashi, T., Imamura, S., Shimizu, T., Motomur, M.: Computer-aided die design for axis-symmetric cold forging products by feature elimination. J. Mater. Process. Technol. 137(1–3), 138–144 (2003)
Kumar, S., Singh, R.: A low cost knowledge base system framework for progressive die design. J. Mater. Process. Technol. 153–154, 958–964 (2004)
Kim, C., Park, C.W.: Development of an expert system for cold forging of axisymmetric product. Int. J. Adv. Manuf. Technol. 29(5), 459–474 (2006)
Cemalcakir, M., Cavdar, K.: Development of a knowledge-based expert system for solving metal cutting problems. Mater. Des. 27, 1027–1034 (2006)
Kumar, S., Singh, R.: An intelligent system for selection of die-set of metal stamping press tool. J. Mater. Process. Technol. 164–165, 1395–1401 (2005)
Cemalcakir, M., Ozgur, I., Cavdar, K.: An expert system approach for die and mold making operations, Robot. Comput. Integr. Manuf. 21:175–183 (2005)
Lee, S.J., Kim, T.S., Lee, S.S., Park, K.S.: Development of an expert system for the trim die design in automotive industry. In: IEEE Proceedings of the 10th International Conference on Computer Supported Cooperative Work in Design (CSCWD) (2006)
Zhang, X., Lu, M., Su, P., Xu, G., Zhao, H.: Research on neural network integration fusion method and application on the fault diagnosis of automotive engine. In: Second IEEE Conference on Industrial Electronics and Applications (2007). doi:10.1109/ICIEA.2007.4318455
Giannakakis, T., Vosniakos, G.C.: Sheet metal cutting and piercing operations planning and tools configuration by an expert system. Int. J. Adv. Manuf. Technol. 36(7–8), 658–670 (2008)
Zhang, X., Han, C.Y., Cui, Y., Lu, Y.P., Liu1, E.F., Cui, H.B.: An active knowledge support system for design of automobile ball. In: IEEE International Workshop on Intelligent Systems and Applications ISA 2009, pp. 1–4 (2009)
Johnston, A.B., Maguire, L.P., McGinnity, T.M.: Downstream performance prediction for a manufacturing system using neural networks and six-sigma improvement techniques. Robot. Comput. Integr. Manuf. 25(3), 513–521 (2009)
Dale, T.M., Young, W.A., Judd, R.P.: A rule-based approach to predict forging volume for cost estimation during product design. Int. J. Adv. Manuf. Technol. 46(1–4), 31–41 (2010)
VeeraBabu, K., Ganesh Narayanan, R., Saravana Kumar, G.: An expert system for predicting the deep drawing behavior of tailor welded blanks. Expert Syst. Appl. 37, 7802–7812 (2010)
Naranje, V., Kumar, S.: AI applications to metal stamping die design—a review. World Acad. Sci. Eng. Technol. 4, 08–22 (2010)
Bhatt, M.R., Buch, S.: Prediction of formability for sheet metal component using artificial intelligent technique. In: 2nd International Conference on Signal Processing and Integrated Networks (SPIN), pp. 388–393 (2015)
Khalajzadeh, H., Dadkhah, C., Mansouri, M.: A review on applicability of expert system in designing and control of autonomous cars. In: IEEE Fourth International Workshop on Advanced Computational Intelligence (IWACI), pp. 280–285 (2011)
Samuel, G.L., Bhagat, A.: Development of an expert system for designing of automobile dampers. In: Proceedings of the 2011 Fourth International Conference on Emerging Trends in Engineering and Technology (2011). doi:10.1109/ICETET.2011.20
Yaw, N.A., Simonov, K.S.: MVES—a mobile vehicle expert system for vehicle troubleshooting through a driver’s mobile device. Int. J. Eng. Res. Appl. 2(6), 1108–1123 (2012)
Mumtaz, I., Selvi, I.H., Findik, F., Torku, O., Cedimoglu, I.H.: An expert system based material selection approach to manufacturing. Mater. Des. 47, 331–340 (2013)
Luis, M., Trevino, T., Indira, G., Salazar, E., Ortiz, B.G., Alejo, R.P.: An expert system for setting parameters in machining processes. Expert Syst. Appl. 40(17), 6877–6884 (2013)
Agarwal, M., Goel, S.: Expert system and it’s requirement engineering process. In: IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), pp. 1–4 (2014)
Ang, J., Leong, S.B., Lee, C.F., Yusof, U.K.: Requirement engineering techniques in developing expert systems. In: Computers & Informatics (ISCI), pp. 640–645 (2011)
Tudor, L., Moise, A.: Automatic expert system for fuzzy control of robot trajectory in joint space. In: IEEE International Conference on Mechatronics and Automation (ICMA), pp. 1057–1062 (2013)
Lin, B.T., Huang, K.M., Su, K.Y., Hsu, C.Y.: Development of an automated structural design system for progressive dies. Int. J. Adv. Manuf. Technol. 68, 1887–1899 (2013)
Ahmad, T., Taani, A.: An expert system for car failure diagnosis. World Acad. Sci. Eng. Technol. 1, 12–20 (2007)
Jiang, L.L., Yong, N., Tang, L.H., Yong, H.: Fault diagnosis expert system of automobile engine based on neural networks. Key Eng. Mater. 460–461, 605–610 (2011)
Horikoshi, Y., Kuboki, T., Murata, M., Matsui, K., Tsubokura, M.: Die design for deep drawing with high-pressured water jet utilizing computer fluid dynamics based on Reynolds equation. J. Mater. Process. Technol. 218, 99–106 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Bhatt, M.R., Buch, S. (2016). Application of Rule Based and Expert Systems in Various Manufacturing Processes—A Review. In: Satapathy, S., Das, S. (eds) Proceedings of First International Conference on Information and Communication Technology for Intelligent Systems: Volume 1. Smart Innovation, Systems and Technologies, vol 50. Springer, Cham. https://doi.org/10.1007/978-3-319-30933-0_46
Download citation
DOI: https://doi.org/10.1007/978-3-319-30933-0_46
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-30932-3
Online ISBN: 978-3-319-30933-0
eBook Packages: EngineeringEngineering (R0)