Abstract
A novel method to assess a crack growing/damage event in fibre reinforced plastic, using conventional single mode Fibre Bragg Grating sensors embedded in the host material is presented in this article. Three different damage mechanisms that can change the sensor output, longitudinal strain \( \varepsilon_{xx} \), transversal stress \( \sigma_{yy,zz} \), and non-uniform strain \( \varepsilon_{xx} (xx) \), were identified. These damage mechanisms were identified during the experimental testing and linked with the sensor output using a digital image correlation technique. A dedicated algorithm to extract information from the reflected spectrum that enables crack detection was developed. Double Cantilever Beams specimens made with glass fibre and bonded with structural adhesive, were instrumented with a Fibre Bragg Grating array embedded in the host material, and tested using an experimental fracture procedure. This method was successfully validated in three different loading conditions, where were obtained very promising results that enable crack growth monitoring.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Jones, R.M.: Mechanics of Composite Materials. Taylor & Francis, Abingdon (1999). ISBN:156032712x,9781560327127
Sørensen, B.F.: Cohesive Laws for Assessment of Materials Failure: Theory, Experimental Methods and Application. Risø DTU, Roskilde (2010). ISBN:9788755038271
Suo, Z., Bao, G., Fan, B.: Delamination R-curve phenomena due to damage. J. Mech. Phys. Solids 40, 1–16 (1992)
Silversides, I., Maslouhi, A., Laplante, G.: Interlaminar fracture characterization in composite materials by using acoustic emission. In: 5th International Symposium on NDT in Aerospace, Singapore (2013)
Kyriazoglou, C., Le Page, B., Guild, F.J.: Vibration damping for crack detection in composite laminates. Compos. Part A Appl. Sci. Manuf. 35(7–8), 945–953 (2004)
Huiwen, H., Wang, B-T., Lee, C-H., Su, J-S.: Damage detection of surface cracks in composite laminates using modal analysis and strain energy method. In: Composite Structures, vol. 74, no. 4, pp. 399–405, (2006)
Yan, Y.J., Yam, L.H.: Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis. Compos. Struct. 58(1), 29–38 (2002)
Hill, K., Meltz, G.: Fiber Bragg grating technology fundamentals and overview. J. Lightwave Technol. 15(8), 1263–1276 (1997)
Morey, W., Meltz, G., Glenm, W.: Fiber optic Bragg grating sensors. In: Fiber Optic and Laser Sensors VII. vol.1169, (1989)
Sørensen, L., Botsis, J., Gmr, T., Cugnoni, J.: Delamination detection and characterisation of bridging tractions using long FBG optical sensors. In: Composite Part A: applied science and manufacturing, vol. 38, no. 10, pp. 2087–2096, (2007)
Zhang, W., Chen, W., Shu, W., Lei, X., Liu, X.: Effects of bonding layer on the available strain measuring range of fiber Bragg gratings. In: Applied Optics, vol. 53, no. 5, p. 885, (2014)
Julich, F., Roths, J.: Comparison of transverse load sensitivities of fibre Bragg gratings in different types of optical fibres. In: Optical Sensing and Detection, vol. 7726, no. 0, p. 77261N–77261N-9, (2010)
Bosia, F., Giaccari, P., Botsis, J., Facchini, M., Limberger, H.G.: Characterization of the response of fibre Bragg grating sensors subjected to a two-dimensional strain field. Smart Mater. Struct. 925(12), 925–934 (2003)
Yashiro, S., Okabe, T., Toyama, N., Takeda, N.: Monitoring damage in holed CFRP laminates using embedded chirped FBG sensors. Int. J. Solids Struct. 44(2), 603–613 (2007)
Zhang, X., Max, J-J., Jiang, X., Yu, L., Kassi, H.: Experimental investigation on optical spectral deformation of embedded FBG sensors. In :Proceedings of SPIE, vol. 6478, pp. 647808–647808-7, (2007)
Peters, K., Studer, M., Botsis, J., Iocco, A., Limberger, H., Salath, R.: Embedded optical fiber bragg grating sensor in a nonuniform strain field: measurements and simulations., In: Kluwer Academic Publishers, vol. 41, pp. 19–28, (2001). doi:10.1007/BF02323100
Sørensen, B.F., Jørgensen, K., Jacobsen, T., ∅stergaard, R.C.: DCB-specimen loaded with uneven bending moments. In:International Journal of Fracture, vol. 141, pp. 163–176, (2006). doi:10.1007/s10704-006-0071-x
Acknowledgements
The authors acknowledges the Seventh Framework Programme (FP7) for funding the project MareWint (Project reference: 309395) as Marie-Curie Initial Training Network, Fibersensing for providing the FBG sensors and hardware, and SSP-Technology for providing the material tested.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Pereira, G., Mikkelsen, L.P., McGugan, M. (2016). Fibre Bragg Grating Sensor Signal Post-processing Algorithm: Crack Growth Monitoring in Fibre Reinforced Plastic Structures. In: Ribeiro, P., Raposo, M. (eds) Photoptics 2015. Springer Proceedings in Physics, vol 181. Springer, Cham. https://doi.org/10.1007/978-3-319-30137-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-30137-2_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-30135-8
Online ISBN: 978-3-319-30137-2
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)