Skip to main content
SpringerLink
Log in
Book cover

Powder Consolidation Using Cold Spray pp 33–75Cite as

Modeling Cold Spray

  • Chapter
  • First Online:

Part of the book series: SpringerBriefs in Applied Sciences and Technology ((BRIEFSPOLIMI))

Abstract

Particle/substrate interaction during cold spray (CS) deposition and the resultant bonding are of great importance because they affect coating characteristics. Experimental studies and computational modeling have been performed to get a better understanding of the bonding mechanism during CS as well as its mechanical behavior under different loading conditions. This chapter focuses on modeling approaches and is composed of four sections. In the first three sections, different approaches to model the impact of a single particle and the criteria to relate it to the bonding in CS are discussed. Section 3.1 discusses adiabatic shear instability and the Lagrangian approach to study impact phenomena. Section 3.2 is about the hybrid Lagrangian-analytical approach and uses energy criteria to assess bonding in CS. Section 3.3 uses the Eulerian framework to study material jet formation to analyze bonding in CS. These approaches are devoted to the impact phenomenon of particles to the substrate. In Sect. 3.4, the first attempt to model a consolidated coating is proposed. The model is used to understand the effect of defects such as interparticle boundaries and subsequent splat boundary cracking on the mechanical behavior of CS coatings.

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   39.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   54.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

Notes

  1. 1.

    In a collaboration with Mostafa Hassani-Gangaraj.

References

  1. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, S. Vezzu, Effect of cold spray deposition of similar material on fatigue behavior of Al 6082 alloy. Fract. Fatigue 7, 51–57 (2014)

    Google Scholar 

  2. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A critical review of corrosion protection by cold spray coatings. Surf. Eng. 31(11), 803–815 (2015)

    Article  Google Scholar 

  3. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, M. Dao, Cold spray coating: review of material systems and future perspectives. Surf. Eng. 30, 369–395 (2014)

    Article  Google Scholar 

  4. A. Moridi, Cold spray coating: Process evaluation and wealth of applications; from structural repair to bioengineering. Ph.D. thesis, 2015

    Google Scholar 

  5. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško, M. Guagliano, Fatigue behavior of cold spray coatings: the effect of conventional and severe shot peening as pre-/post-treatment. Surf. Coat. Technol. 283, 247–254 (2015)

    Article  Google Scholar 

  6. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzù, M. Guagliano, Number of passes and thickness effect on mechanical characteristics of cold spray coating. Proc. Eng. 74, 449–459 (2014)

    Article  Google Scholar 

  7. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, On fatigue behavior of cold spray coating, MRS Proceedings, vol. 1650, pp. mrsf13–1650–jj05–03 (Cambridge University Press, 2014)

    Google Scholar 

  8. T. Stoltenhoff, H. Kreye, H.J. Richter, An analysis of the cold spray process and its coatings. J. Thermal Spray Technol. 11(4), 542–550 (2002)

    Article  Google Scholar 

  9. H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen, H. Kreye, On parameter selection in cold spraying. J. Thermal Spray Technol. 20(6), 1161–1176 (2011)

    Article  Google Scholar 

  10. H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Bonding mechanism in cold gas spraying. Acta Materialia 51(15), 4379–4394 (2003)

    Article  Google Scholar 

  11. T. Wright, Shear band susceptibility: work hardening materials. Int. J. Plasticity 8(2), 583–602 (1992)

    Article  MATH  Google Scholar 

  12. T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Development of a generalized parameter window for cold spray deposition. Acta Materialia 54(3), 729–742 (2006)

    Article  Google Scholar 

  13. G. Bae, Y. Xiong, S. Kumar, K. Kang, C. Lee, General aspects of interface bonding in kinetic sprayed coatings. Acta Materialia 56(17), 4858–4868 (2008)

    Article  Google Scholar 

  14. W.-Y. Li, X. Guo, C. Verdy, L. Dembinski, H. Liao, C. Coddet, Improvement of microstructure and property of cold-sprayed Cu4at.%Cr2at.%Nb alloy by heat treatment. Scripta Materialia 55(4), 327–330 (2006)

    Article  Google Scholar 

  15. W.-Y. Li, C. Zhang, C.-J. Li, H. Liao, Modeling aspects of high velocity impact of particles in cold spraying by explicit finite element analysis. J. Thermal Spray Technol. 18(5–6), 921–933 (2009)

    Article  Google Scholar 

  16. W.-Y. Li, W. Gao, Some aspects on 3D numerical modeling of high velocity impact of particles in cold spraying by explicit finite element analysis. Appl. Surf. Sci. 255(18), 7878–7892 (2009)

    Article  Google Scholar 

  17. F. Meng, H. Aydin, S. Yue, J. Song, The effects of contact conditions on the onset of shear instability in cold-spray. J. Thermal Spray Technol. 24(4), 1–9 (2015)

    Article  Google Scholar 

  18. X.L. Zhou, A.F. Chen, J.C. Liu, X.K. Wu, J.S. Zhang, Preparation of metallic coatings on polymer matrix composites by cold spray. Surf. Coat. Technol. 206(1), 132–136 (2011)

    Article  Google Scholar 

  19. J. Wu, H. Fang, S. Yoon, H. Kim, C. Lee, The rebound phenomenon in kinetic spraying deposition. Scripta Materialia 54(4), 665–669 (2006)

    Article  Google Scholar 

  20. J. Wu, H. Fang, S. Yoon, C. Lee, H. Kim, Critical velocities for high speed particle deposition in kinetic spraying. Mater. Trans. 47, 1723–1727 (2006)

    Article  Google Scholar 

  21. A. Singh, Micro-Macro and Rheology in Sheared Granular Matter (2014)

    Google Scholar 

  22. A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano, A hybrid approach to determine critical and erosion velocities in the cold spray process. Appl. Surf. Sci. 273, 617–624 (2013)

    Article  Google Scholar 

  23. A.-S. Persson, G. Frenning, An experimental evaluation of the accuracy to simulate granule bed compression using the discrete element method. Powder Technol. 219, 249–256 (2012)

    Article  Google Scholar 

  24. D. William, J. Callister, Fundamentals of Materials Science and Engineering, An Interactive, 5th edn. (Wiley, 2001)

    Google Scholar 

  25. ABAQUS 6.10-1, ABAQUS 6.10-1 (2010)

    Google Scholar 

  26. S.M.H. Gangaraj, M. Guagliano, G.H. Farrahi, An approach to relate shot peening finite element simulation to the actual coverage. Surf. Coat. Technol. 234, 39–45 (2014)

    Article  Google Scholar 

  27. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strain, high strain rates and high temperature, Proceedings of the 7th International Symposium on Ballistics, pp. 541–547, 1983

    Google Scholar 

  28. G.B. Olson, J.F. Mescall, M. Azrin, Adiabatic Deformation and Strain Localization (Plenum Press, M.A. New York, 1981)

    Google Scholar 

  29. R. Kapoor, S. Nemat-Nasser, Determination of temperature rise during high strain rate deformation. Mech. Mater. 27, 1–12 (1998)

    Article  Google Scholar 

  30. S.A. Meguid, G. Shagal, J.C. Stranart, 3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model. Int. J. Impact Eng. 27, 119–134 (2002)

    Article  Google Scholar 

  31. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, T. Klassen, From particle acceleration to impact and bonding in cold spraying. J. Thermal Spray Technol. 18(5–6), 794–808 (2009)

    Article  Google Scholar 

  32. F. Gartner, T. Stoltenhoff, T. Schmidt, H. Kreye, The cold spray process and its potential for industrial applications. J. Thermal Spray Technol. 15, 223–232 (2006)

    Article  Google Scholar 

  33. S. Alexandre, T. Laguionie, B. Baccaud, Realization of an internal cold spray coating of stainless steel in an aluminum cylinder, in Proceeding of Thermal Spray, pp. 1–6, 2007

    Google Scholar 

  34. T.H. Van Steenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, D.W. Gorkiewicz, R.P. Tison, D.R. Marantz, K.A. Kowalsky, W.L. Riggs, P.H. Zajchowski, B. Pilsner, R.C. McCune, K.J. Barnett, Kinetic spray coatings. Surf. Coat. Technol. 111, 62–71 (1999)

    Article  Google Scholar 

  35. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, M.F. Smith, Particle velocity and deposition efficiency in the cold spray process. J. Thermal Spray Technol. 8(4), 576–582 (1999)

    Article  Google Scholar 

  36. G. Bae, S. Kumar, S. Yoon, K. Kang, H. Na, H.-J. Kim, C. Lee, Bonding features and associated mechanisms in kinetic sprayed titanium coatings. Acta Materialia 57(19), 5654–5666 (2009)

    Article  Google Scholar 

  37. K. Binder, J. Gottschalk, M. Kollenda, F. Gärtner, T. Klassen, Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits. J. Thermal Spray Technol. 20(1–2), 234–242 (2010)

    Google Scholar 

  38. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, D. Helfritch, Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process. Appl. Surf. Sci. 219(3–4), 211–227 (2003)

    Article  Google Scholar 

  39. M. Yu, W.-Y. Li, F.F. Wang, H.L. Liao, Finite element simulation of impacting behavior of particles in cold spraying by eulerian approach. J. Thermal Spray Technol. 21(3–4), 745–752 (2011)

    Google Scholar 

  40. W.Y. Li, M. Yu, F.F. Wang, S. Yin, H.L. Liao, A generalized critical velocity window based on material property for cold spraying by Eulerian method. J. Thermal Spray Technol. 23(3), 557–566 (2013)

    Article  Google Scholar 

  41. S. Yin, H.L. Liao, X.F. Wang, Euler based finite element analysis on high velocity impact behaviour in cold spraying. Surf. Eng. 30(5), 309–315 (2014)

    Article  Google Scholar 

  42. F.F. Wang, W.Y. Li, M. Yu, H.L. Liao, Prediction of critical velocity during cold spraying based on a coupled thermomechanical Eulerian model. J. Thermal Spray Technol. 23(1–2), 60–67 (2013)

    Google Scholar 

  43. X.K. Suo, X.P. Guo, W.Y. Li, M.P. Planche, H.L. Liao, Investigation of deposition behavior of cold-sprayed magnesium coating. J. Thermal Spray Technol. 21(5), 831–837 (2012)

    Article  Google Scholar 

  44. W.M. Telford, W.M. Telford, L.P. Geldart, R.E. Sheriff, Appl. Geophys. (Cambridge University Press, Monograph series, 1990)

    Book  Google Scholar 

  45. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A. Ghidini, Nitriding duration reduction without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of surface nano-crystallization by prior severe shot peening. Mater. Des. 55, 492–498 (2014)

    Article  Google Scholar 

  46. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, A. Ghidini, M. Boniardi, The effect of nitriding, severe shot peening and their combination on the fatigue behavior and micro-structure of a low-alloy steel. Int. J. Fatigue 62, 67–76 (2013)

    Article  Google Scholar 

  47. S.M. Hassani-Gangaraj, A. Moridi, M. Guagliano, Fatigue properties of a low-alloy steel with a nano-structured surface layer obtained by severe mechanical treatments. Key Eng. Mater. 577–578, 469–472 (2013)

    Article  Google Scholar 

  48. M. Azadi, G.H. Farrahi, A. Moridi, Optimization of air plasma sprayed thermal barrier coating parameters in diesel engine applications. J. Mater. Eng. Perform. 22(11), 3530–3538 (2013)

    Article  Google Scholar 

  49. N. Habibi, S.M.H-Gangaraj, G.H. Farrahi, G.H. Majzoobi, A.H. Mahmoudi, M. Daghigh, A. Yari, A. Moridi, The effect of shot peening on fatigue life of welded tubular joint in offshore structure. Mater. Des. 36, 250–257 (2012)

    Google Scholar 

  50. A. Gouldstone, N. Chollacoop, M. Dao, J. Li, A. Minor, Y. Shen, Indentation across size scales and disciplines: Recent developments in experimentation and modeling. Acta Materialia 55(12), 4015–4039 (2007)

    Article  Google Scholar 

  51. A.C. Fischer-Cripps, Nanoindentation, 2nd edn. (Springer, New York, 2004)

    Google Scholar 

  52. H. Li, A. Ghosh, Y.H. Han, R.C. Bradt, The frictional component of the indentation size effect in low load microhardness testing. J. Mater. Res. 8, 1028–1032 (1993)

    Google Scholar 

  53. W.D. Nix, H. Gao, Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46(3) (1998)

    Google Scholar 

  54. J. Gong, H. Miao, Z. Zhao, Z. Guan, Load-dependence of the measured hardness of Ti (C, N)-based cermets. Mater. Sci. Eng. A 303, 179–186 (2001)

    Article  Google Scholar 

  55. D. Goldbaum, J.M. Shockley, R.R. Chromik, A. Rezaeian, S. Yue, J.-G. Legoux, E. Irissou, The effect of deposition conditions on adhesion strength of Ti and Ti6Al4V cold spray splats. J. Thermal Spray Technol. 21(2), 288–303 (2011)

    Article  Google Scholar 

  56. M. Dao, N. Chollacoop, K.J. Van Vliet, T. Venkatesh, S. Suresh, Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Materialia 49(19), 3899–3918 (2001)

    Article  Google Scholar 

  57. N. Chollacoop, M. Dao, S. Suresh, Depth-sensing instrumented indentation with dual sharp indenters. Acta Materialia 51(13), 3713–3729 (2003)

    Article  Google Scholar 

  58. K. Tai, M. Dao, S. Suresh, A. Palazoglu, C. Ortiz, Nanoscale heterogeneity promotes energy dissipation in bone. Nat. Mater. 6(6), 454–462 (2007)

    Article  Google Scholar 

  59. M. Grujicic, C.L. Zhao, W.S. DeRosset, D. Helfritch, Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process. Mater. Des. 25(8), 681–688 (2004)

    Article  Google Scholar 

  60. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, S. Sampath, Impact of high velocity cold spray particles. J. Thermal Spray Technol. 8(4), 559–564 (1999)

    Article  Google Scholar 

  61. P.C. King, G. Bae, S.H. Zahiri, M. Jahedi, C. Lee, An experimental and finite element study of cold spray copper impact onto two aluminum substrates. J. Thermal Spray Technol. 19(3), 620–634 (2010)

    Article  Google Scholar 

  62. S.V. Hainsworth, H.W. Chandler, T.F. Page, Analysis-of-nanoindentation-load-displacement-loading-curves. J. Mater. Res. 11(8), 1987–1995 (1996)

    Google Scholar 

  63. M.R. McGurk, T.F. Page, Using the P-2 analysis to deconvolute the nanoindentation response of hard-coated systems. J. Mater. Res. 14(6), 2283–2295 (1999)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts, USA

    Atieh Moridi

Authors
  1. Atieh Moridi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Atieh Moridi .

Rights and permissions

Reprints and permissions

Copyright information

© 2017 The Author(s)

About this chapter

Cite this chapter

Moridi, A. (2017). Modeling Cold Spray. In: Powder Consolidation Using Cold Spray. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-319-29962-4_3

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-29962-4_3

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-29961-7

  • Online ISBN: 978-3-319-29962-4

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation