Abstract
In this paper a finite element model, with over half a million degrees-of-freedom, of a car front subframe has been calibrated and validated against experimental MIMO data of several nominally identical components. The spread between the individual components has been investigated and is reported. Sensor positioning was performed with an extended effective independence method, using system gramians to reject sensors with redundant information. The Fisher information matrix was used in the identification of the most significant model calibration parameters. Validation of the calibrated model was performed to evaluated the difference between the nominal and calibrated model, and bootstrapping used to investigate the validity of the calibrated parameters. The parameter identification, calibration, validation and bootstrapping have been performed using the open-source MATLAB tool FEMCali.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ewins, D.J.: Modal Testing: Theory, Practice and Application, 2nd edn., 576pp. Wiley-Blackwell, Baldock, Hertfordshire, Philadelphia, PA (2000)
Friswell, M.I., Mottershead, J.E.: Finite Element Model Updating in Structural Dynamics. Solid Mechanics and Its Applications, vol. 38. Springer Netherlands, Dordrecht (1995)
Abrahamsson, T.J.S., Kammer, D.C.: Finite element model calibration using frequency responses with damping equalization. Mech. Syst. Signal Process. 6263, 218–234 (2015). doi:10.1016/j.ymssp.2015.02.022
Abrahamsson, T., et al.: Calibration and cross-validation of a car component using frequency response functions and a damping equalization technique. In: 26th International Conference on Noise and Vibration Engineering, ISMA 2014, Including the 5th International Conference on Uncertainty in Structural Dynamics, USD 2014, pp. 2625–2640 (2014)
Abrahamsson, T.J.S., et al.: Calibration and validation of a car subframe finite element model using frequency responses. In: Mains, M. (ed.) Topics in Modal Analysis. Conference Proceedings of the Society for Experimental Mechanics Series, vol. 10, pp. 9–22. Springer International Publishing, Cham (2015)
Larsson, K.-J., et al.: Calibration and cross-validation of a car component model using repeated testing. In: Atamturktur, H.S., et al. (eds.) Model Validation and Uncertainty Quantification. Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 339–350. Springer International Publishing, Cham (2015)
Granado, I.E.: Model calibration of a vehicle tailgate using frequency response functions. Chalmers Student Theses (2015). http://studentarbeten.chalmers.se. Accessed on 22 Oct 2015
Kammer, D.C.: Sensor set expansion for modal vibration testing. Mech. Syst. Signal Process. 19 (4), 700–713 (2005). doi:10.1016/j.ymssp.2004.06.003
Gibanica, M., Abrahamsson, T.J.S., Kammer, D.C.: Redundant information rejection in sensor localisation using system gramians. In: Proceedings of the 34th IMAC, Orlando, FL (2016)
Vakilzadeh, M.K,. et al.: Experiment design for improved frequency domain subspace system identification of continuous-time systems. In: Proceedings of the 17th IFAC Symposium on System Identification, Bejing (2015)
McKelvey, T., Akçay, H., Ljung, L.: Subspace-based identification of infinite-dimensional multivariable systems from frequency-response data. Automatica 32 (6), 885–902 (1996). doi:10.1016/0005-1098(96)00022-2
Hastie, T., Tibshirani, R., Friedman, J.: The Elements of Statistical Learning - Data Mining, Inference, and Prediction. Springer Series in Statistics. Springer, New York (2009)
Craig, R.R.J., Kurdila, A.J.: Fundamentals of Structural Dynamics, 2nd edn, 744pp. Wiley, Hoboken, NJ (2006)
McKay, M.D., Beckman, R.J., Conover, W.J. Comparison of three methods for selecting values of input variables in the analysis of output from a computer code. Technometrics 21 (2), 239–245 (1979). doi:10.1080/00401706.1979.10489755
Acknowledgements
Volvo Car Corporation is gratefully acknowledged for providing the funding for this paper.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Gibanica, M., Abrahamsson, T.J.S., Olsson, M. (2016). Calibration, Validation and Uncertainty Quantification of Nominally Identical Car Subframes. In: Atamturktur, S., Schoenherr, T., Moaveni, B., Papadimitriou, C. (eds) Model Validation and Uncertainty Quantification, Volume 3. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-29754-5_31
Download citation
DOI: https://doi.org/10.1007/978-3-319-29754-5_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-29753-8
Online ISBN: 978-3-319-29754-5
eBook Packages: EngineeringEngineering (R0)