Abstract
There are several methods that have been developed in the last decade which use the data extracted from EBDS measurement for the purpose of determining the recrystallized volume of deformed and annealed metals. Two general ideas could be identified: calculations based on the quality of indexing of the scanned points and calculations relying on the differences in crystallographic orientations. First, a simple method is presented utilizing the Image Quality (IQ) indexing of the EBSD data. Estimations were also made analyzing the orientation maps resulted from the same measurements. In the final section the applicability of the IQ based method is discussed in comparison to the misorientation (MO) technique. Based on the accuracy of the measured and calculated results the proposed method seems useful although both procedure offer unreliable estimations at low recrystallization rates.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Black, M.P., Higginson, R.L.: Investigation into the use of electron back scattered diffraction to measure recrystallised fraction. Scr. Mater. 41, 125–129 (1999)
Lu, H., Sivaprasad, P., Davies, C.H.J.: Treatment of misorientation data to determine the fraction of recrystallized grains in a partially recrystallized metal. Mater. Char. 51, 293–300 (2003)
Dziaszyk, S., Payton, E.J., Friedel, F., Marx, V., Eggeler, G.: On the characterization of recrystallized fraction using electron backscatter diffraction: a direct comparison to local hardness in an if steel using nanoindentation. Mat. Sci. Eng. A 527, 7854–7864 (2010)
Wright, S.I., Nowell, M.M.: EBSD image quality mapping. Microsc. Microanal. 12, 72–84 (2006)
Lassen, N.C.K., Jensen, D.J.: Automatic recognition of recrystallized grains in partially recrystallized samples from crystal orientation maps. In: Szpunar, J. (ed.) Proceedings of ICOTOM 12, vol. 2, pp. 854–859. NRC Research Press, Ottawa (1999)
Humphreys, F.J.: Quantitative metallography by electron backscattered diffraction. J. Microsc. 195, 170–185 (1999)
Tarasiuk, J., Gerber, Ph, Bacroix, B.: Estimation of recrystallized volume fraction from EBSD data. Acta Mater. 50, 1467–1477 (2002)
Wu, G., Jensen, D.J.: Automatic determination of recrystallization parameters based on EBSD mapping. Mater. Char. 59, 794–800 (2008)
Humphreys, F.J.: Grain and subgrain characterisation by electron backscatter diffraction. J. Mater. Sci. 36, 3833–3854 (2001)
Larsen, A.W., Jensen, D.J.: Automatic determination of recrystallization parameters in metals by electron backscatter pattern line scans. Mater. Char. 51, 271–282 (2003)
Benchabanea, G., Boumerzouga, Z., Thibonb, I., Gloriant, T.: Recrystallization of pure copper investigated by calorimetry and microhardness. Mater. Char. 59, 1425–1428 (2008)
Acknowledgements
This research has been supported by the assistance of the European Union, by the co-financing of the European Social Fund (TÁMOP-4.2.1.B-11/2/KMR-2011-0001). The authors are also grateful to the Department of Materials Science and Engineering of Budapest University of Technology and Economics to made the EBSD measurements possible.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Mucsi, A., Varga, P. (2016). Evaluation of Differences in the Estimated Recrystallized Volume Using Different Methods Based on EBSD Data. In: Nádai, L., Padányi, J. (eds) Critical Infrastructure Protection Research. Topics in Intelligent Engineering and Informatics, vol 12. Springer, Cham. https://doi.org/10.1007/978-3-319-28091-2_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-28091-2_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-28090-5
Online ISBN: 978-3-319-28091-2
eBook Packages: EngineeringEngineering (R0)