Software Determining Optimum Order for Maintenance

Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 423)

Abstract

The paper deals with the development of Reliability Centered Maintenance software for distribution system network elements. In this case describes the order of maintenance for transformers 110 kV/MV. When determining an optimum maintenance sequence, the appropriate parameters of technical conditions and operational importance are required. The database of input values referring to the technical conditions and importance has been completed over the recent year. This paper describes processing of such input databases to create a format required for subsequent calculations and the first results that is the definition of order for maintenance.

Keywords

110 kV/MV transformer Technical condition Operational importance Optimal order for maintenance Database processing RCM 

Notes

Acknowledgments

This research was partially supported by the SGS grant from VSB - Technical University of Ostrava (No. SP2016/95) and by the project TUCENET (No. LO1404).

References

  1. 1.
    Mourbay, J.: Reliability-Centred Maintenance. Butterworth-Heinemann, Oxford (1997)Google Scholar
  2. 2.
    Martínek, Z., Královacová, V.: The solution for repairable units. In: Proceedings of the 11th International Scientific Conference Electric Power Engineering 2010, University of Technology Brno, pp. 593–597 (2010)Google Scholar
  3. 3.
    Král, V., Rusek, S., Goňo, R.: Software for the assessment of the optimum maintenance sequence for 110 kV/MV transformers. In: Proceedings of Elnet 2010, VŠB-TU Ostrava, Ostrava, pp. 15–26 (2010)Google Scholar

Copyright information

© Springer International Publishing Switzerland 2016

Authors and Affiliations

  1. 1.Department of Electrical Power EngineeringVSB - Technical University of OstravaOstravaCzech Republic

Personalised recommendations