Abstract
On the market of energy harvesting devices, there are more and more solutions, what means strong development of this relatively new part of industry. In the case of underground mining industry, it is not possible to use the typical solutions and they must be properly adopted. Part of the project results associated with a development of wireless, self-supplying sensor networks for operation in underground mines are given. The results of the measurement of voltage generated by piezoelectric energy harvester (PEH) for of free mounting and installation in the housing, limiting its deflection, are given. Tests were conducted in the laboratory conditions, using a vibrating table. The measurement results indicate a significant reduction of energy generated by PEH when it is installed in the casing, confining its movement. Simulated operation of wireless sensor powered by PEH in a casing and without casing is also presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bartoszek, S., Jagoda, J., Jura, J.: System diagnostyczny ładowarki bocznie wysypującej bazujący na iskrobezpiecznej magistrali CAN (in Polish). Szybkobieżne Pojazdy Gąsienicowe (32) nr 1, Ośrodek Badawczo-Rozwojowy Urządzeń Mechanicznych OBRUM sp. z o.o., Gliwice (2013)
Catalogue card of Elgór-Hansen EH-PressCater system (www.elgorhansen.com)
Catalogue card of Famur FAMAC RSPC system (www.famur.com.pl)
Zhu, D., Beeby, S.P., Tudor, M.J., Harris, N.R.: A credit card sized self powered smart sensor node. Sens. Actuators A 169(2), 317–325 (2011)
Sazonov, E., Li, H., Curry, D., Pillay, P.: Self-powered sensors for monitoring of highway bridges. IEEE Sens. J. 9(11) (2009)
Wischke, M., Masur, M., Kröner, M., Woias, P.: Vibration harvesting in traffic tunnels to power wireless sensor nodes. Smart Mater. Struct. 20(8) (2011)
Lee, M., Bae, J., Lee, J., Lee, C.-S., Hong, S., Wang, Z.L.: Self-powered environmental sensor system driven by nanogenerators. Energy Environ. Sci. 4, 3359–3363 (2011)
Mitcheson, P.D., Rao, G.K., Green, T.C.: Energy harvesting from human and machine motion for wireless electronic devices. Proc. IEEE 96(9) (2008)
Theophylus Yusuf, S., Halim, Y.M.A., Samosir, A.S., Abdulkadir, M.: Mechanical energy harvesting devices for low frequency applications: revisited. ARPN J. Eng. Appl. Sci. 8(7) (2013)
Sudevalayam, S., Kulkarni, P.: Energy harvesting sensor nodes: survey and implications. IEEE Commun. Surv. Tutorials 13(3) (2011)
Wang, Z.L.: Self-powered nanosensors and nanosystems. Adv. Mater. 24(2), 280–285 (2011)
Stankiewicz, K.: Metoda samoorganizacji roju w monitorowaniu i sterowaniu urządzeń w warunkach wyrobisk podziemnych (in Polish). Maszyny Górnicze nr 4, 10–13 (2011)
Arabshahi, P., Gray, A., Kassabalidis, I., Das, A., Narayanan, S., Sharkawi, M., El Marks, R.J.: Adaptive routing in wireless communication networks using swarm intelligence. In: AIAA 19th Annual Satellite Communications System Conference, Toulouse, France (2001)
Buchacz, A., Wróbel, A.: Modelling of complex piezoelectric system by non-classical methods. J. Achievements Mater. Manufact. Eng. 35, 63–70 (2009)
Buchacz, A., Płaczek, M., Wróbel, A.: Control of characteristics of mechatronic systems using piezoelectric materials. J. Theor. Appl. Mech. 51(1), 225–234, Warsaw (2013)
Vullers, R.J.M., van Schaijk, R., Doms, I., Van Hoof, C., Mertens, R.: Micropower energy harvesting. Solid-State Electron. 53, 684–693 (2009)
Chen, X.-R., Yang, T.-Q., Wang, W., Yao, X.: Vibration energy harvesting with a clamped piezoelectric circular diaphragm. Ceram. Int. 38, 271–274 (2012)
Sardini, E., Serpelloni, M.: Self-powered wireless sensor for air temperature and velocity measurements with energy harvesting capability. IEEE Trans. Instrum. Measur. 60(5) (2011)
Sardini, E., Serpelloni, M.: Passive and self-powered autonomous sensors for remote measurements. Sensors 9, 943–960 (2009)
Gilbert, J.M., Balouchi, F.: Comparison of energy harvesting systems for wireless sensor networks. Int. J. Autom. Comput. 05(4), 334–347 (2008)
Zuo, L., Tang, X.: Large-scale vibration energy harvesting. J. Intell. Mater. Syst. Struct. 24(11), 1405–1430 (2013)
Roundy, S., Wright, P.K., Rabaey, J.: A study of low level vibrations as a power source for wireless sensor nodes. Comput. Commun. 26, 1131–1144 (2003)
Jasiulek, D., Stankiewicz, K., Jagoda, J.: Możliwości zastosowania czujników samozasilających się przeznaczonych do pracy w podziemiach kopalń (in Polish). Mechanizacja i Automatyzacja Górnictwa. Nr 8(519), 73–80 (2013)
Jasiulek, D.: Alternative sensors power source used in mining. ITG KOMAG Gliwice (not published) (2012)
Jasiulek, D.: Propozycje zastosowania czujników samozasilających się w przemyśle wydobywczym (in Polish). Przegląd Górniczy 1 (2014)
Woszczyński, M., Świder, J.: Use of the system for energy recuperation and control in diesel machines. Mach. Dyn. Res. 38(1) (2014)
Wang, D.-A., Pham, H.-T., Chao, C.-W., Chen, J.M.: A piezoelectric energy harvester based on pressure fluctuations in Kármán Vortex Street. In: World Renewable Energy Congress, Linkoping, Sweden, 8–13 May 2011. Hydropower Applications (2011)
Cunefare, K.A., Skow, E.A., Erturk, A., Savor, J., Verma, N., Cacan, M.R.: Energy harvesting from hydraulic pressure fluctuations. Smart Mater. Struct. 22 (2013)
Żólkiewski, S.: Vibrations of beams with a variable cross-section fixed on rotational rigid disks. Latin Am. J. Solids Struct. 10, 39–57 (2013)
Bai, P., Zhu, G., Lin, Z.-H., Jing, Q., Chen, J., Zhang, G., Ma, J., Wang, Z.L.: Integrated multilayered triboelectric nanogenerator for harvesting biomechanical energy from human motions. ACS Nano 7, 3713–3719 (2013)
Prabaharan, R., Jayaramaprakash, A., VijayAnand, L.: Power harvesting by using human foot step. Int. J. Innov. Res. Sci. Eng. Technol. 2(7) (2013)
Stankiewicz, K., Woszczyński, M.: Metody odzyskiwania i przetwarzania energii cieplnej (in Polish). Maszyny Górnicze nr 1, 39–46 (2010)
Jaworski, B., Dietłaf, A., Miłkowska, L.: Kurs fizyki. T. II: Elektryczność i magnetyzm (in Polish). Warszawa: Państwowe Wydawnictwo Naukowe (1984)
Glynne-Jones, P., Tudor, M.J., Beeby, S.P., White, N.M.: An electromagnetic, vibration-powered generator for intelligent sensor systems. Sens. Actuators A 110, 344–349 (2004)
Shena, H., Qiu, J., Balsi, M.: Vibration damping as a result of piezoelectric energy harvesting. Sens. Actuators A, 169, pp. 178–186 (2011)
Catalogue card of MIDE V21BL-ND transducer (www.mide.com)
Aboulfotoha, N.A., Arafab, M.H., Megahed, S.M.: A self-tuning resonator for vibration energy harvesting. Sens. Actuators A 201, 328–334 (2013)
Radkowski, S., Lubikowski, K., Piątak, A.: Vibration energy harvesting in the transportation system: a review. Diagnostyka—Appl. Struct. Health Usage Condition Monit. 4(64) (2012)
Challa, V.R., Prasad, M.G., Fisher, F.T.: Towards an autonomous self-tuning vibration energy harvesting device for wireless sensor network applications. Smart Mater. Struct. 20 (2011)
Tang, X., Zuo, L.: Simultaneous energy harvesting and vibration control of structures with tuned mass dampers. J. Intell. Mater. Syst. Struct. 23(18), 2117–2127 (2012)
Jia, Y., Seshia, A.A.: An auto-parametrically excited vibration energy harvester. Sens. Actuators A 220, 69–75 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Jasiulek, D. (2016). Testing the Piezoelectric Energy Harvester’s Deflection on the Amount of Generated Energy. In: Awrejcewicz, J., Kaliński, K., Szewczyk, R., Kaliczyńska, M. (eds) Mechatronics: Ideas, Challenges, Solutions and Applications. Advances in Intelligent Systems and Computing, vol 414. Springer, Cham. https://doi.org/10.1007/978-3-319-26886-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-26886-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-26885-9
Online ISBN: 978-3-319-26886-6
eBook Packages: EngineeringEngineering (R0)