Abstract
Studies of surface and liquid–solid interaction have always been an important branch of science, and its role just increases exponentially due to the expanded application of digital printing. To date, due to the on-demand nature of ink printing, it has become a manufacturing technology for many current and futuristic electronic devices, such as display, printed electronics, and wearable and flexible devices. Research on surface has always been messy, however. Debates and rigorous discussion on the Young’s contact angle, measurement procedures, and data interpretation have been ongoing in the surface literature for many decades. In this chapter, the justification of writing this book is described. The shortfalls in surface science are briefly overviewed. A roadmap that systematically addresses fundamental issues on measurements, basic concepts in wetting and surface characterization, and definitions and terminologies is provided throughout this book. It is our hope that this collection of surface fundamentals will improve readers’ basic understanding of all the key concepts, which will eventually enhance the quality of surface research in the future.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kim J, Moon MW, Lee KR, Mahadevan L, Kim HY (2011) Hydrodynamics of writing with ink. Phys Rev Lett 107:264501
Bruzewicz DA, Reches M, Whitesides GM (2008) Low-cost printing of PDMS barriers to define microchannels in paper. Anal Chem 80:3387–3392
Martinez AW, Phillips ST, Whitesides GM (2008) Three-dimensional microfluidic devices fabricated in layered paper and tape. Proc Natl Acad Sci U S A 105:19606–19611
Paso K, Kompalla T, Aske N, Ronningsen HD, Oye G, Sjoblom J (2009) Novel surfaces with applicability for preventing wax deposition: a review. J Dispersion Sci Technol 30:757–781
Katano Y, Tomono H, Nakajima T (1994) Surface property of polymer films with fluoroalkyl side chains. Macromolecules 27:2342–2344
Samuel B, Zhao H, Law KY (2011) Study of wetting and adhesion interactions between water and various polymer and superhydrophobic surfaces. J Phys Chem C 115:14852–14861
Dejidas LP Jr, Destree TM (2006) Sheetfed offset press operating, 3rd edn. PIA-GATF Press, Pittsburgh, Chapter 6
Perelaer J, Smith PJ, Mager D, Soltman D, Volkman SK, Subramanian V, Korvink JG, Schubert US (2010) Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials. J Mater Chem 20:8446–8453
Zielke D, Hubler AC, Hahn U, Brandt N, Bartzsch M (2005) Polymer-based organic field-effect transistor using off-set printed source-drain structures. Appl Phys Lett 87:123508
Kang B, Lee WH, Cho K (2013) Recent advances in organic transistor printing processes. ACS Appl Mater Interfaces 5:2302–2315
Fukuda K, Sekine T, Kumake D, Tokito S (2013) Profile control of inkjet printed silver electrodes and their application to organic transistors. ACS Appl Mater Interfaces 5:3916–3920
Schuppert A, Thielen M, Reinhold J, Schmidt WA, Schoeller F, Osnabruck O (2011) Ink jet printing of conductive silver tracks from nanoparticle inks on mesoporous substrates. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 437–440
Wu Y (2011) Inkjet printed silver electrodes for organic thin film transistors. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 441–444
Zipperer D (2011) Printed electronic for flexible applications. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 452–453
Simske S, Aronoff JS, Duncan B (2011) Printed antennas for combined RFID and 2D barcodes. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 544–547
Sanz V, Bautista RY, Feliu C, Roig Y (2011) Technical evolution of ceramic tile digital decoration. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 532–536
Nossent KJ (2011) A breakthrough high speed wide format print concept for textile. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. p 556
Huson D (2011) 3D printing of ceramics for design concept molding. NIP27 and digital fabrication 2011. Technical Programs and Proceeding. pp 815–818
Arias AC, Mackenzie JD, McCulloch I, Pivnay J, Salleo A (2010) Materials and applications for large area electronics: solution-based approaches. Chem Rev 110:3–24
Habas SE, Platt HAS, van Hest MFAM, Ginley DS (2010) Low-cost inorganic solar cells: from ink to printed devices. Chem Rev 110:6571–6594
Deegan RD, Bakajin O, Dupont TF, Huber G, Nagel SR, Witter TA (1997) Capillary flow as the cause of ring stains from dried liquid drops. Nature 389:827–829
Young T (1805) An essay on the cohesion of fluids. Phil Trans R Soc London 95:65–87
Gao LC, McCarthy TJ (2009) An attempt to correct the faulty intuition perpetuated by the Wenzel and Cassie “Laws”. Langmuir 25:7249–7255
Gao LC, McCarthy TJ (2009) Wetting 101°. Langmuir 25:14105–14115
Pease DC (1945) The significance of the contact angle in relation to the solid surface. J Phys Chem 49:107–110
Morra M, Occhiello E, Garbossi F (1990) Knowledge about polymer surfaces from contact angle measurements. Adv Colloid Interface Sci 32:79–116
Kwok DY, Neumann AW (1999) Contact angle measurement and contact angle interpretation. Adv Colloid Interfacial Sci 81:167–249
Marmur A (2006) Soft contact. Measurement and interpretation of contact angles. Soft Matter 2:12–17
Strobel M, Lyons SL (2011) An essay on contact angle measurements. Plasma Process Polym 8:8–13
Bartell FE, Wooley AD (1933) Solid–liquid–air contact angles and their dependence upon the surface condition of the solid. J Am Chem Soc 55:3518–3527
Bartell FE, Hatch GB (1934) Wetting characteristics of galena. J Phys Chem 39:11–24
Fox HW, Zisman WA (1950) The spreading of liquids on low energy surfaces. 1. Polytetrafluoroethylene. J Colloid Sci 5:514–531
Good RJ (1977) Free energy of solids and liquids: thermodynamics, molecular forces, and structure. J Colloid Interface Sci 59:398–419
Decker EL, Frank B, Suo Y, Garoff S (1999) Physics of contact angle measurement. Colloids Surf A 156:177–189
Drelich J (2013) Guidelines to measurements of predictable contact angles using a sessile-drop technique. Surf Innov 1:248–254
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Law, KY., Zhao, H. (2016). Background. In: Surface Wetting. Springer, Cham. https://doi.org/10.1007/978-3-319-25214-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-25214-8_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-25212-4
Online ISBN: 978-3-319-25214-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)