Abstract
System identification, in practice, is carried out by perturbing processes or plants under operation. That is why in many industrial applications an optimal input signal would be preferred for system identification. In this case, the objective function was formulated through maximisation of the Fisher information matrix determinant (D-optimality) expressed in conventional Bolza form. As setting such conditions of the identification experiment we can only say about the D-suboptimality, we quantify the plant trajectories using the D-efficiency measure. An additional constraint, imposed on D-efficiency of the solution, should allow to attain the most adequate contents of information from the plant which operating point is perturbed in the least invasive way. A simple numerical example, which clearly demonstrates the idea presented in the paper, is included and discussed.
Chapter PDF
Similar content being viewed by others
References
Ljung, L.: System identification: Theory for the user. Prentice Hall, USA (1999)
Pintelon, R., Schoukens, J.: System identification: A frequency domain approach. John Wiley & Sons, USA (2001)
Kalaba, R., Spingarn, K.: Control, identification, and input optimization. Plenum Press, New York (1982)
Hugo, A.J.: Process controller performance monitoring and assessment. Control. Arts Inc. http://www.controlarts.com
Hildebrand, R., Gevers, M.: Identification for control: Optimal input design with respect to worst-case v-gap cost function. SIAM Journal on Control Optimization 41, 1586–1608 (2003)
Pronzato, L.: Optimal experimental design and some related control problems. Automatica 44, 303–325 (2008)
Hussain, M.: Review of the applications of neural networks in chemical process control-simulation and on-line implementation. Artificial Intelligence in Engineering 13, 55–68 (1999)
Narasimhan, S., Rengaswamy, R.: Multi-objective input signal design for plant friendly identification of process systems. In: Proceeding of the American Control Conference 2006, Boston, Massachusetts, pp. 4891–4896 (2004)
Narasimhan, S., Rengaswamy, R.: Multi-objective optimal input design for plant friendly identification. In: Proceeding of the American Control Conference 2008, Seattle, Washington, pp. 1304–1309 (2008)
Rivera, D., Lee, H., Braun, M., Mittelmann, H.: Plant friendly system identification: a challenge for the process industries. In: SYSID 2003, Rotterdam, Netherlands (2003)
Steenis, R., Rivera, D.: Plant-Friendly Signal Generation for System Identification Using a Modified Simultaneous Perturbation Stochastic Approximation (SPSA) Methodology. IEEE Transactions on Control Systems Technology 19, 1604–1612 (2011)
El-Kady, M., Salim, M., El-Sagheer, A.: Numerical treatment of multiobjective optimal control problems. Automatica 39, 47–55 (2003)
Jakowluk, W.: Design of an optimal input signal for plant-friendly identification of inertial systems. Przegląd Elektrotechniczny 85(6), 125–129 (2009)
Jakowluk, W.: Plant friendly input design for parameter estimation in an inertial system with respect to D-efficiency constraints. Entropy 16(11), 5822–5837 (2014)
Atkinson, A., Donev, A., Tobias, R.: Optimum experimental design with SAS. Oxford University Press, Oxford (2007)
Uciński, D., Chen, Y.Q.: Sensor motion planning in distributed parameter systems using turing’s measure of conditioning. In: Proceedings of the 45th IEEE Conference on Decision and Control 2006, San Diego, CA. WeB03.6, pp. 759–764. CD-ROM (2006)
Schwartz, A.. Polak, E., Chen, Y.: A Matlab toolbox for solving optimal control problems. Version 1.0 for Windows, May 1997. http://www.schwartz-home.com/~adam/RIOTS/
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 IFIP International Federation for Information Processing
About this paper
Cite this paper
Jakowluk, W. (2015). Optimal Input Signal Design for a Second Order Dynamic System Identification Subject to D-Efficiency Constraints. In: Saeed, K., Homenda, W. (eds) Computer Information Systems and Industrial Management. CISIM 2015. Lecture Notes in Computer Science(), vol 9339. Springer, Cham. https://doi.org/10.1007/978-3-319-24369-6_29
Download citation
DOI: https://doi.org/10.1007/978-3-319-24369-6_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-24368-9
Online ISBN: 978-3-319-24369-6
eBook Packages: Computer ScienceComputer Science (R0)