Abstract
Drilling is the most commonly used manufacturing processes for holemaking. Researchers are dealing with the development of mathematical models for a series of phenomena related to drilling i.e. burr size, surface roughness, cutting forces. The present research investigates the relationships and parametric interaction of the three input variables (tool diameter, cutting velocity, feed rate) on the thrust force and torque developed during drilling of an Al7075 workpiece with solid carbide tools. A complete set of experiments was performed and the response surface methodology (RSM) was used in order to acquire the mathematical models for both the thrust force and the torque required. The analysis of variance (ANOVA) was used to verify the adequacy of the mathematical models. The most significant factors were recognized. The main and interaction effects plots were studied and the 3D response surfaces are presented.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kabakli E, Bayramoglu M, Geren N (2014) Evaluation of the surface roughness and geometric accuracies in a drilling process using the Taguchi analysis. Materials and Technology 48(1):91–98
Myers RH, Montgomery DC, Anderson-Cook CM (2009) Response surface methodology: process and product optimization using designed experiments, 3rd edn. Wiley, New York
Killickap E (2010) Modeling and optimization of burr height in drilling of Al7075 using Taguchi method and response surface methodology. Int J Adv Manuf Technol 49:911–923
Asilturk I (2012) Predicting surface roughness of hardened AISI 1040 based on cutting parameters using neural networks and multiple regression. Int J Adv Manuf Technol 63:249–257
Gaitonde VN, Karnik SR, Achyutha BT, Siddeswarappa B, Davim JP (2009) Predicting burr size in drilling of AISI 316L stainless steel using response surface analysis. Int J Mater Prod Technol 35(1–2):228–245
Davim JP, Gaitonde VN, Karnik SR (2007) An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models. Int J Adv Manuf Technol 37:49–57
Yoon HS, Wu R, Lee TM, Ahn SH (2001) Geometric optimization of micro drills using Taguchi methods and response surface methodology. Int J Precis Eng Manuf 12(5):871–875
Badan I, Oancea G, Vasiloni M (2012) Mathematical model for drilling cutting forces of 40CrMnMoS8-6 steel. Bull Transilvania Univ Brasov-Ser I Eng Sci 5(54):31–38
Cicek A, Kivak T, Samtas G, Cay Y (2012) Modeling of thrust forces in drilling of AISI 316 stainless steel using artificial neural network and multiple regression analysis. Strojniski Vestnik—J Mech Eng 58:492–498
Jayabal S, Natarajan U (2011) Modelling and optimization of thrust force, torque and tool wear in drilling of coir fibre reinforced composites using response surface method. Int J Mach Mach Mater 9(1/2):149–172
Jayabal S, Natarajan U, Sekar U (2011) Regression modeling and optimization of machinability behavior of glass-coir-polyester hybrid composite using factorial design methodology. Int J Adv Manuf Technol 55:263–273
Kumar BS, Baskar N (2013) Integration of fuzzy logic with response surface methodology for thrust force and surface roughness modeling of drilling on titanium alloy. Int J Adv Manuf Technol 65:1501–1514
Valarmathi TN, Palanikumar K, Latha B (2013) Measurement and analysis of thrust force in drilling of particle board (PB) composite panels. Measurement 46:1220–1230
Montgomery DC (2001) Design and analysis of experiments. Wiley, New York
Acknowledgments
This research was supported by the Special Research Account of the Technological Education Institute of Western Macedonia under the project “Promoting research and technological advancement—Support of the TEI of Western Macedonia research groups”.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Kyratsis, P., Garcia-Hernandez, C., Vakondios, D., Antoniadis, A. (2016). Thrust Force and Torque Mathematical Models in Drilling of Al7075 Using the Response Surface Methodology. In: Davim, J. (eds) Design of Experiments in Production Engineering. Management and Industrial Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-23838-8_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-23838-8_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23837-1
Online ISBN: 978-3-319-23838-8
eBook Packages: EngineeringEngineering (R0)