Abstract
In this chapter, vapor-grown and electrospun carbon nanofibers (CNFs) are emphasized. Fabrication processes and surface modification methods for CNFs are presented. Microstructure of CNFs is discussed based on the reported observations in various studies. CNFs have a complex structure compared to the structure of carbon nanotubes . The orientation of carbon layers in CNFs affects their mechanical properties. Experimental analyses and resulting trends are discussed from various published works, such as studies that investigate the tensile and flexural properties of individual CNFs. The range of measured properties is rather wide, which is likely due to the difference in the structure of the fibers that were tested and the presence of defects. Molecular dynamic simulation results on single nanofibers are also presented to understand their potential of reinforcing composites.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Tibbetts, G. G. (1989). Vapor-grown carbon fibers: Status and prospects. Carbon, 27(5), 745–747.
Fitzer, E. (1989). Pan-based carbon fibers—present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters. Carbon, 27(5), 621–645.
Al-Saleh, M. H., & Sundararaj, U. (2009). A review of vapor grown carbon nanofiber/polymer conductive composites. Carbon, 47(1), 2–22.
Al-Saleh, M. H., & Sundararaj, U. (2011). Review of the mechanical properties of carbon nanofiber/polymer composites. Composites Part A: Applied Science and Manufacturing, 42(12), 2126–2142.
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., & Lee, J. H. (2010). Recent advances in graphene based polymer composites. Progress in Polymer Science, 35(11), 1350–1375.
Tibbetts, G. G., Lake, M. L., Strong, K. L., & Rice, B. P. (2007). A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites. Composites Science and Technology, 67(7–8), 1709–1718.
Kim, Y. A., Hayashi, T., Endo, M., & Dresselhaus, M. S. (2013). Carbon nanofibers. In: R. Vajtai (Ed.), Springer handbook of nanomaterials (p. 1500). Berlin: Springer.
Teo, K. B. K., Singh, C., & Milne, W. I. (2003). Catalytic synthesis of carbon nanotubes and nanofibers. In: H. S. Nalwa (Ed.), Encyclopedia of nanoscience and nanotechnology (pp. 665–686). Stevenson Ranch, CA, USA: American Scientific Publishers.
Palmeri, M. J., Putz, K. W., Ramanathan, T., & Brinson, L. C. (2011). Multi-scale reinforcement of CFRPs using carbon nanofibers. Composites Science and Technology, 71(2), 79–86.
Vera-Agullo, J., Varela-Rizo, H., Conesa, J. A., Almansa, C., Merino, C., & Martin-Gullon, I. (2007). Evidence for growth mechanism and helix-spiral cone structure of stacked-cup carbon nanofibers. Carbon, 45(14), 2751–2758.
Schulz, M., Shanov, V. N., & Yin, Z. (2013). 1.1.6—A note on carbon nanofibers. In: Nanotube superfiber materials: Changing engineering design (pp. 10–11). Oxford: Elsevier Science.
Melechko, A. V., Merkulov, V. I., McKnight, T. E., Guillorn, M. A., Klein, K. L., & Lowndes, D. H., et al. (2005). Vertically aligned carbon nanofibers and related structures: Controlled synthesis and directed assembly. Journal of Applied Physics, 97(4), 041301-041301-39.
Martin-Gullon, I., Vera, J., Conesa, J. A., González, J. L., & Merino, C. (2006). Differences between carbon nanofibers produced using Fe and Ni catalysts in a floating catalyst reactor. Carbon, 44(8), 1572–1580.
Sinnott, S. B., Andrews, R., Qian, D., Rao, A. M., Mao, Z., Dickey, E. C., & Derbyshire, F. (1999). Model of carbon nanotube growth through chemical vapor deposition. Chemical Physics Letters, 315(1–2), 25–30.
Rodriguez, N. M., Chambers, A., & Baker, R. T. K. (1995). Catalytic engineering of carbon nanostructures. Langmuir, 11(10), 3862–3866.
Terrones, H., Hayashi, T., Muñoz-Navia, M., Terrones, M., Kim, Y. A., Grobert, N., et al. (2001). Graphitic cones in palladium catalysed carbon nanofibres. Chemical Physics Letters, 343(3–4), 241–250.
Wei, C. Y., & Srivastava, D. (2004). Nanomechanics of carbon nanofibers: Structural and elastic properties. Applied Physics Letters, 85(12), 2208–2210.
Gu, J., & Sansoz, F. (2014). Role of cone angle on the mechanical behavior of cup-stacked carbon nanofibers studied by atomistic simulations. Carbon, 66, 523–529.
Zhang, L., Aboagye, A., Kelkar, A., Lai, C., & Fong, H. (2014). A review: Carbon nanofibers from electrospun polyacrylonitrile and their applications. Journal of Materials Science, 49(2), 463–480.
Arshad, S. N., Naraghi, M., & Chasiotis, I. (2011). Strong carbon nanofibers from electrospun polyacrylonitrile. Carbon, 49(5), 1710–1719.
Zhou, Z., Liu, K., Lai, C., Zhang, L., Li, J., Hou, H., et al. (2010). Graphitic carbon nanofibers developed from bundles of aligned electrospun polyacrylonitrile nanofibers containing phosphoric acid. Polymer, 51(11), 2360–2367.
Zussman, E., Chen, X., Ding, W., Calabri, L., Dikin, D. A., Quintana, J. P., & Ruoff, R. S. (2005). Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers. Carbon, 43(10), 2175–2185.
Pelfrey, S., Cantu, T., Papantonakis, M. R., Simonson, D. L., McGill, R. A., & Macossay, J. (2010). Microscopic and spectroscopic studies of thermally enhanced electrospun PMMA micro- and nanofibers. Polymer Chemistry, 1(6), 866–869.
Endo, M., Kim, Y. A., Hayashi, T., Nishimura, K., Matusita, T., Miyashita, K., & Dresselhaus, M. S. (2001). Vapor-grown carbon fibers (VGCFs): Basic properties and their battery applications. Carbon, 39(9), 1287–1297.
Hasan, M. M., Zhou, Y., & Jeelani, S. (2007). Thermal and tensile properties of aligned carbon nanofiber reinforced polypropylene. Materials Letters, 61(4–5), 1134–1136.
Kuriger, R. J., Alam, M. K., Anderson, D. P., & Jacobsen, R. L. (2002). Processing and characterization of aligned vapor grown carbon fiber reinforced polypropylene. Composites Part A: Applied Science and Manufacturing, 33(1), 53–62.
Lim, C.-S., Rodriguez, A. J., Guzman, M. E., Schaefer, J. D., & Minaie, B. (2011). Processing and properties of polymer composites containing aligned functionalized carbon nanofibers. Carbon, 49(6), 1873–1883.
Ozkan, T., Naraghi, M., & Chasiotis, I. (2010). Mechanical properties of vapor grown carbon nanofibers. Carbon, 48(1), 239–244.
Tan, E. P. S., & Lim, C. T. (2006). Mechanical characterization of nanofibers—A review. Composites Science and Technology, 66(9), 1102–1111.
Zhang, J., Loya, P., Peng, C., Khabashesku, V., & Lou, J. (2012). Quantitative in situ mechanical characterization of the effects of chemical functionalization on individual carbon nanofibers. Advanced Functional Materials, 22(19), 4070–4077.
Kim, G.-T., Gu, G., Waizmann, U., & Roth, S. (2002). Simple method to prepare individual suspended nanofibers. Applied Physics Letters, 80(10), 1815–1817.
Chen, Y.-M., & Ting, J.-M. (2002). Ultra high thermal conductivity polymer composites. Carbon, 40(3), 359–362.
Gershon, A. L., & Bruck, H. A. (2011). Mechanical behavior of hierarchically-structured polymer composites. In: T. Proulx (Ed.), Experimental and applied mechanics (Vol. 6, pp. 347–354). New York: Springer.
Gu, J., & Sansoz, F. (2013). An atomistic simulation study of the mechanisms and kinetics of surface bond strengthening in thermally-treated cone-stacked carbon nanofibers. Carbon, 56, 351–357.
Poveda, R., & Gupta, N. (2014). Carbon-nanofiber-reinforced syntactic foams: Compressive properties and strain rate sensitivity. JOM Journal of the Minerals Metals and Materials Society, 6(1), 66–77.
Lawrence, J. G., Berhan, L. M., & Nadarajah, A. (2008). Elastic properties and morphology of individual carbon nanofibers. ACS Nano, 2(6), 1230–1236.
Tan, E. P. S., & Lim, C. T. (2004). Physical properties of a single polymeric nanofiber. Applied Physics Letters, 84(9), 1603–1605.
Al-Saleh, M. H., & Sundararaj, U. (2010). Processing-microstructure-property relationship in conductive polymer nanocomposites. Polymer, 51(12), 2740–2747.
Zhu, Y., Bakis, C. E., & Adair, J. H. (2012). Effects of carbon nanofiller functionalization and distribution on interlaminar fracture toughness of multi-scale reinforced polymer composites. Carbon, 50(3), 1316–1331.
Prolongo, S. G., Burón, M., Gude, M. R., Chaos-Morán, R., Campo, M., & Ureña, A. (2008). Effects of dispersion techniques of carbon nanofibers on the thermo-physical properties of epoxy nanocomposites. Composites Science and Technology, 68(13), 2722–2730.
Lim, J.-Y., Oh, S.-I., Kim, Y.-C., Jee, K.-K., Sung, Y.-M., & Han, J. H. (2012). Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites. Materials Science and Engineering A, 556, 337–342.
Ingram, J., Zhou, Y., Jeelani, S., Lacy, T., & Horstemeyer, M. F. (2008). Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene. Materials Science and Engineering A, 489(1–2), 99–106.
Wang, D. H., Sihn, S., Roy, A. K., Baek, J.-B., & Tan, L.-S. (2010). Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: Functionalization, preparation and characterization. European Polymer Journal, 46(7), 1404–1416.
Ahn, S.-N., Lee, H.-J., Kim, B.-J., Tan, L.-S., & Baek, J.-B. (2008). Epoxy/amine-functionalized short-length vapor-grown carbon nanofiber composites. Journal of Polymer Science Part A: Polymer Chemistry, 46(22), 7473–7482.
Brandl, W., Marginean, G., Chirila, V., & Warschewski, W. (2004). Production and characterisation of vapour grown carbon fiber/polypropylene composites. Carbon, 42(1), 5–9.
Kumar, S., Rath, T., Mahaling, R. N., Reddy, C. S., Das, C. K., Pandey, K. N., et al. (2007). Study on mechanical, morphological and electrical properties of carbon nanofiber/polyetherimide composites. Materials Science and Engineering B, 141(1–2), 61–70.
Lozano, K., & Barrera, E. V. (2001). Nanofiber-reinforced thermoplastic composites. I. Thermoanalytical and mechanical analyses. Journal of Applied Polymer Science, 79(1), 125–133.
Nataraj, S. K., Kim, B. H., Yun, J. H., Lee, D. H., Aminabhavi, T. M., & Yang, K. S. (2009). Morphological characterization of electrospun carbon nanofiber mats of polyacrylonitrile containing heteropolyacids. Synthetic Metals, 159(14), 1496–1504.
Nouranian, S., Jang, C., Lacy, T. E., Gwaltney, S. R., Toghiani, H., & Pittman, C. U, Jr. (2011). Molecular dynamics simulations of vinyl ester resin monomer interactions with a pristine vapor-grown carbon nanofiber and their implications for composite interphase formation. Carbon, 49(10), 3219–3232.
Jang, C., Nouranian, S., Lacy, T. E., Gwaltney, S. R., Toghiani, H., & Pittman, C. U, Jr. (2012). Molecular dynamics simulations of oxidized vapor-grown carbon nanofiber surface interactions with vinyl ester resin monomers. Carbon, 50(3), 748–760.
Mapkar, J. A., Belashi, A., Berhan, L. M., & Coleman, M. R. (2013). Formation of high loading flexible carbon nanofiber network composites. Composites Science and Technology, 75, 1–6.
Mittal, V. (2011). In-situ synthesis of polymer nanocomposites. In: In-situ synthesis of polymer nanocomposites (pp. 1–25). GmbH & Co. KGaA: Wiley-VCH Verlag.
Pleshakov, V. F. (2011). Computer models of helical nanostructures. Journal of Modern Physics, 2(3), 97–108.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 The Author(s)
About this chapter
Cite this chapter
Poveda, R.L., Gupta, N. (2016). Carbon Nanofibers: Structure and Fabrication. In: Carbon Nanofiber Reinforced Polymer Composites. SpringerBriefs in Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-23787-9_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-23787-9_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23786-2
Online ISBN: 978-3-319-23787-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)