Abstract
Variable stiffness modules add significant robustness to mechanical systems during forceful interactions with uncertain environments. Traditionally, most existing variable stiffness modules tend to be bulky by virtue of their use of solid components making them less suitable for mobile applications. In recent times, pretensioned cable-based modules have been proposed to reduce weight. While passive, these modules depend on significant internal tension to provide the desired stiffness and their stiffness modulation capability tends to be limited. In this paper, we present a planar 2DOF cable robot formed by three active variable stiffness modules that we developed which decouples tension from stiffness. Controlled changes in structural parameters (independent of cable actuation) now permits independent modulation of the perceived stiffness. By varying each module’s stiffness, the overall Cartesian stiffness of the robot can be modulated. We show that this approach is more effective than by increasing internal tension only. It is also easier than varying configuration to achieve variable stiffness. Further, thanks to the added active stiffness adjustment motor, it is able to independently vary stiffness and internal tension. Therefore such active module can achieve same Cartesian stiffness as passive modules but with much lower internal tension, which is more efficient. We present the analysis of the system and verified via both simulation and experimental results for the effectiveness of the Cartesian stiffness varying capability of the planar cable robot.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Jafari, A., Tsagarakis, N.G., Vanderborght, B., Caldwell, D.G.: A novel actuator with adjustable stiffness (awas). In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2010. 4201–4206
Jafari, A., Tsagarakis, N.G., Caldwell, D.G.: Awas-ii: A new actuator with adjustable stiffness based on the novel principle of adaptable pivot point and variable lever ratio. In: IEEE International Conference on Robotics and Automation (ICRA), pp. 4638–4643 (2011)
Hung Vu, Q., Aryananda, L., Sheikh, F.I., Casanova, F., Pfeifer, R.: A novel mechanism for varying stiffness via changing transmission angle. In: IEEE International Conference on Robotics and Automation (ICRA), pp. 5076–5081 (2011)
Schiavi, R., Grioli, G., Sen, S., Bicchi, A.: Vsa-ii: A novel prototype of variable stiffness actuator for safe and performing robots interacting with humans. In: IEEE International Conference on Robotics and Automation, ICRA 2008. pp. 2171–2176 (2008)
Laffranchi, M., Tsagarakis, N.G., Cannella, F., Caldwell, D.: Antagonistic and series elastic actuators: a comparative analysis on the energy consumption. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2009 (Oct 2009), pp. 5678–5684 (2009)
Hurst, J.W., Chestnutt, J.E., Rizzi, A.A.: The actuator with mechanically adjustable series compliance. IEEE Trans. Robot. 26(4), 597–606 (2010)
Vanderborght, B., Tsagarakis, N.G., Semini, C., Van Ham, R., Caldwell, D.G.: Maccepa 2.0: Adjustable compliant actuator with stiffening characteristic for energy efficient hopping. In: IEEE International Conference on Robotics and Automation, ICRA ’09, pp. 544–549 (2009)
Ham, R., Sugar, T., Vanderborght, B., Hollander, K., Lefeber, D.: Compliant actuator designs. IEEE Robot. Autom. Mag. 16(3), 81–94 (2009)
Vanderborght, B., Albu-Schaeffer, A., Bicchi, A., Burdet, E., Caldwell, D.G., Carloni, R., Catalano, M., Eiberger, O., Friedl, W., Ganesh, G., Garabini, M., Grebenstein, M., Grioli, G., Haddadin, S., Hoppner, H., Jafari, A., Laffranchi, M., Lefeber, D., Petit, F., Stramigioli, S., Tsagarakis, N., Van Damme, M., Van Ham, R., Visser, L.C., Wolf, S.: Variable impedance actuators: a review. Robot. Auton. Syst. 61(12), 1601–1614 (2013)
Yu, K., Lee, L.F., Krovi, V.: Simultaneous trajectory tracking and stiffness control of cable actuated parallel manipulator. In: Proceedings of the ASME Design Engineering Technical Conferences and Computer and Information in Engineering Conferences, vol. 7, San Diego, California, USA, pp. 55–63 (2009)
Yu, K., Lee, L.F., Tang, C.P., Krovi, V.: Enhanced trajectory tracking control with active lower bounded stiffness control for cable robot. In: IEEE International Conference on Robotics and Automation (ICRA), Anchorage, AK, pp. 669–674 (2010)
Zhou, X., Jun, S., Krovi, V.: Stiffness modulation exploiting configuration redundancy in mobile cable robots. In: IEEE International Conference on Robotics and Automation (ICRA), Hong Kong, China (May 29- June 6, 2014)
Tonietti, G., Schiavi, R., Bicchi, A.: Design and control of a variable stiffness actuator for safe and fast physical human/robot interaction. In: Proceedings of the IEEE International Conference on Robotics and Automation, ICRA 2005, pp. 526–531 ( 2005)
Friedl, W., Chalon, M., Reinecke, J., Grebenstein, M.: Fas a flexible antagonistic spring element for a high performance over actuated hand. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 4201–4206 (2011)
Osada, M., Ito, N., Nakanishi, Y., Inaba, M.: Realization of flexible motion by musculoskeletal humanoid with add-on nonlinear spring units. In: IEEE-RAS International Conference on Humanoid Robots (Humanoids), 10th, pp. 174–179 (2010)
Yeo, S.H., Yang, G., Lim, W.B.: Design and analysis of cable-driven manipulators with variable stiffness. Mech. Mach. Theor. 69, 230–244 (2013)
Zhou, X., Jun, S., Krovi, V.: A cable based active variable stiffness module with decoupled tension. In: ASME 2014 International Design Engineering Technical Conferences and Computers in Engineering Conference (IDETC 2014), Buffalo, NY (Aug. 17-20, 2014)
Zhou, X., Tang, C., Krovi, V.: 7. In: cooperating mobile cable robots: screw theoretic analysis. Lecture Notes in Electrical Engineering, vol. 57, pp. 109–123. Springer, Berlin Heidelberg (2013)
Chen, S.F., Kao, I.: Conservative congruence transformation for joint and cartesian stiffness matrices of robotic hands and fingers. Int. J. Robot. Res. 19(9), 835–847 (2000)
Yeo, S., Yang, G., Lim, W.: Design and analysis of cable-driven manipulators with variable stiffness. Mech. Mach. Theor. 69, 230–244 (2013)
Acknowledgments
This work was supported in part by the National Science Foundation Grants IIS-1319084 and CNS-1314484.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Zhou, X., Jun, Sk., Krovi, V. (2016). Planar Cable Robot with Variable Stiffness. In: Hsieh, M., Khatib, O., Kumar, V. (eds) Experimental Robotics. Springer Tracts in Advanced Robotics, vol 109. Springer, Cham. https://doi.org/10.1007/978-3-319-23778-7_26
Download citation
DOI: https://doi.org/10.1007/978-3-319-23778-7_26
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23777-0
Online ISBN: 978-3-319-23778-7
eBook Packages: EngineeringEngineering (R0)