Abstract
In the precise position fields, precise rotary actuators have played an important role all the time. In this paper, a precise rotary actuator based on small perimeter difference using parallel compliant mechanism is developed. With the help of parallel compliant mechanism, the precise rotary actuator has simple structure, few components and easy assembly procedures. In this paper, the parallel compliant mechanism consists of 16 right circular flexure hinges, where can produce micro displacement and keep high stiffness. Piezoceramic (PZT) is used to drive the parallel compliant mechanism. Because of its high resolution and other advantages of performances, the precise rotary actuator has high rotational motion resolution, which can reach microradian (μrad) level. The angular velocity and the torque are analyzed. Besides the stiffness and stress of compliant mechanism is calculated, which were validated by simulations of nonlinear Finite Element Analysis (FEA). We think the precise rotary actuator has certain application prospect.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Martinez, D.R., Hinnerichs, T.D., Redmond, J.M.:Vibration control for precision manufacturing using piezoelectric actuators. J. Intell. Mater. Syst. Struct. 7(2), 182–191 (1996)
Niezrecki, C., et al.: Piezoelectric actuation: state of the art. Shock Vib. Dig. 33(4), 269–280 (2001)
Lu, H.W., Zhu, J.G., Lin, Z.W., Guo, Y.G.: An inchworm mobile robot using electromagnetic linear actuator. Mechatronics 19, 1116–1125 (2009)
Moon, C., Lee, S., Chung, J.K.: A new fast inchworm type actuator with the robust I/Q heterodyne interferometer feedback. Mechatronics 16(2), 105–110 (2006)
Lobontiu, N., Goldfarb, M., Garcia, E.: A piezoelectric-driven inchworm locomotion device. Mech. Mach. Theory 36(4), 425–443 (2001)
Špiller, M., Hurák, Z.: Hybrid charge control for stick–slip piezoceramics. Mechatronics 21(1), 100–108 (2011)
Yang, C.-F., Jeng, S.-L., Chieng, W.-H.: Motion behavior of triangular waveform excitation input in an operating impact drive mechanism. Sens. Actuators, A 166(1), 66–77 (2011)
Belly, C., Charon, W.: Benefits of amplification in an inertial stepping motor. Mechatronics 22(2), 177–183 (2012)
Li, J., et al.: A piezoelectric-driven rotary actuator by means of inchworm motion. Sens. Actuators, A. 194, 269–276 (2013)
Hertz, H.: On the contact of elastic solids. J. reine angew. Math. 92(156–171), 110 (1881)
Krim, J.: Surface science and the atomic-scale origins of friction: what once was old is new again. Surf. Sci. 500(1), 741–758 (2002)
Paros, J.M.: How to design flexure hinges. Mach. Des. 37, 151–156 (1965)
Yong, Y.K., Lu, T.-F., Handley, D.C.: Review of circular flexure hinge design equations and derivation of empirical formulations. Precis. Eng. 32(2), 63–70 (2008)
Howell, L.L., Midha, A.: A method for the design of compliant mechanisms with small-length flexural pivots. J. Mech. Des. 116(1), 280–290 (1994)
Pei, X., Yu, J., Zong, G., Bi, S.: An effective pseudo-rigid-body method for beam-based compliant mechanisms. Precis. Eng. 34(3), 634–639 (2010)
Smith, S.T.: Flexures: Elements of Elastic Mechanisms. CRC Press (2000)
Acknowledgments
The authors would like to acknowledge the support of National Natural Science Foundation of China (Grant Nos. 51275552) and Foundation for the Author of National Excellent Doctoral Dissertation of PR China (No. 201234).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this paper
Cite this paper
Li, C., Ma, G., Pei, X., Fang, B. (2016). A Precise Rotary Actuator Based on Small Perimeter Difference Using Parallel Compliant Mechanism. In: Ding, X., Kong, X., Dai, J. (eds) Advances in Reconfigurable Mechanisms and Robots II. Mechanisms and Machine Science, vol 36. Springer, Cham. https://doi.org/10.1007/978-3-319-23327-7_36
Download citation
DOI: https://doi.org/10.1007/978-3-319-23327-7_36
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-23326-0
Online ISBN: 978-3-319-23327-7
eBook Packages: EngineeringEngineering (R0)