Abstract
In this paper fatigue test results are presented for titanium grade 5 specimens subjected to uniaxial sinusoidal loading. Specimen were previously machined in order to obtain notches of known size and geometry. The sample was equipped by a couple of strain gages to monitor the deformation of the sample during the test. At the same time also a couple of piezoelectric sensors were attached on the surface of the sample in order to allow detection of acoustic signals generated inside the material during the whole test and obtain linear localization of the emission source. A data acquisition system allowed to record, during the whole test, information about the acoustic activity in terms of cumulative hits number recorded by each sensor, localization of the acoustic event, energy of the event and the associated waveform. Results of the fatigue behaviour of the analyzed material beside the acoustic emission track are presented and discussed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
C. Casavola, L. Lamberti, C. Pappalettere, F. Tattoli, A comprehensive numerical stress—strain analysis of laser beam butt-welded titanium compared with austenitic steel joints. J. Strain Anal. Eng. Design 45(7), 535–554 (2010)
C. Casavola, C. Pappalettere, G. Pluvinage, Fatigue resistance of titanium laser and hybrid welded joints. Mater. Design 32(5), 3127–3135 (2011)
C. Casavola, C. Pappalettere, F. Tursi, Residual stress on Ti6Al4V hybrid and laser welded joints. Conference proceedings of the society for experimental mechanics series, vol. 8, pp. 111–118, 2011
C. Casavola, F. Tattoli, C. Pappalettere, Static and fatigue characterization of titanium alloy welded joints. Proceedings of the SEM annual conference and exposition on experimental and applied mechanics 2007, vol. 3, pp. 1400–1411 (2007)
C. Casavola, C. Pappalettere, Discussion on local approaches for the fatigue design of welded joints. Int. J. Fatigue 31(1), 41–49 (2009)
C. Casavola, C. Pappalettere, F. Tattoli, Experimental and numerical study of static and fatigue properties of titanium alloy welded joints. Mech. Mater. 41(3), 231–243 (2009)
C. Casavola, R. Nobile, C. Pappalettere, A local strain method for the evaluation of welded joints fatigue resistance: the case of thin main-plates thickness. Fatigue Fract. Eng. Mater. Struct. 28(9), 759–767 (2005)
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Feasibility of local stress relaxation by laser annealing and x-ray measurement. Strain 49, 393–398 (2013)
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Preliminary analysis for a new approach to relieve residual stresses by laser heating. Conference proceedings of 11th YSESM youth symposium experimental solid mechanics, Brasov, Romania, May 30th–June 2nd, 2012
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Discussion on the thermal field produced by laser annealing for the residual stress relaxation. Conference proceedings of new trends in fatigue and fracture, pp. 22–30, Moscow, Russia, May 13th–16th, 2013
R.K. Miller, P. McIntire, Acoustic emission testing, Nondestructive Testing Handbook Ed., 2nd ed., American Society for Nondestructive Testing, vol. 5, pp. 275–310, 1987
T.F. Drouillard, T.G. Glenn, Production acoustic emission testing of braze joint. J. Acoust. Emiss. 1(2), 81–85 (1985)
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Acoustic emission analysis of aluminum specimen subjected to laser annealing. Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems 8, 309–315 (2014)
Y.H. Pao, Theory of acoustic emission. Elastic waves and non-destructive testing of materials, AMD20, American Society of Mechanical Engineers, pp. 107–128, 1978
M. Enoki, T. Kishi, S. Kohara, Determination of microcracking moment tensor of quasi-cleavage facet by AE source characterization. Progress in acoustic emission III. Proceedings of the eighth international acoustic emission symposium. The Japanese Society for Non-Destructive Inspection, pp. 763–770, 1983
K. Ono, Trends of recent acoustic emission literature. J. Acoust. Emiss. 12, 177–198 (1994)
D.A. Dornfeld, Application of acoustic emission techniques in manufacturing. NDT Int. 25, 259–269 (1992)
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Hybrid thermography and acoustic emission testing of fatigue crack propagation in Aluminum Samples. Conference proceedings of the society for experimental mechanics series, 66(5), 247–252 (2015)
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Consideration on Acoustic Emissions in Ti Grade 5 During Fatigue Test. Proc. Eng. 109, 320–326 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C. (2016). Acoustic Emission Analysis in Titanium Grade 5 Samples During Fatigue Test. In: Bossuyt, S., Schajer, G., Carpinteri, A. (eds) Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-21765-9_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-21765-9_12
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-21764-2
Online ISBN: 978-3-319-21765-9
eBook Packages: EngineeringEngineering (R0)