Abstract
An experimental study was conducted on the effect of interply nanofiller on the mechanical response of fiber reinforced composite (FRC). Laminate samples were made by hot pressing of woven carbon fiber fabric prepregs. Two batches of samples are prepared, one using five plies of the basic prepreg, the other with silica nanofillers added between the plies during lay-up. Tensile specimen were cut from the laminate under 0, 15, 30, 45, 60, 75 and 90 degrees of fiber orientation are prepared from the laminate. DIC based tensile test is made and the effect of the nano fillers on the mechanical properties are analyzed. Appreciable improvement in strength and Modulus of Elasticity is obtained for fiber orientation of 75° and 60° and reversed response is observed for the fiber angle of 30° and 15°
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kotaki, M., Hamada, H.: Effect of interfacial properties and weave structure on mode I interlaminar fracture behavior of glass satin woven fabric composites. Compos. Part A 28A, 257–266 (1997)
Tehrani, M., Boroujeni, A.Y., Hartman, T.B., Haugh, T.P., Case, S.W., Al-Haik, M.S.: Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube – epoxy composite. Compos. Sci. Technol. 75, 42–48 (2013)
Kim, J., Shioya, M., Kobayashi, H., Kaneko, J., Kido, M.: Mechanical properties of woven laminates and felt composites using carbon fibers. Part 1: in-plane properties. Compos. Sci. Technol. 64, 2221–2229 (2004)
Koohbor, B., Mallon, S., Kidane, A., Sutton, M.A.: A DIC-based study of in-plane mechanical response and fracture of orthotropic carbon fiber reinforced composite. Compos. Part B 66, 388–399 (2014)
Pollock, P., Yu, L., Sutton, M.A., Guo, S., Majumdar, P., Gresil, M.: Full-field measurements for determining orthotropic elastic parameters of woven glass-epoxy composites using off-axis tensile specimens. Exp. Tech. 38, 61–71 (2014)
Naik, N.K., Asmelash, A., Kavala, V.R., Veerraju, C.: Interlaminar shear properties of polymer matrix composites: strain rate effect. Mech. Mater. 39, 1043–1052 (2007)
Nidal, A., Leif, A.C., Louis, B.: The effect of weave pattern and crack propagation direction on mode I delamination resistance of woven glass and carbon composites. Compos. Part B 29B, 603–611 (1998)
Nelson, J.M., Hackett, S.C., Hine, A.M., Sedgwick, P., Lowe, R.H., Quinn, D., Goetz, D.P., Schultz, W.J.: Development of nanosilica-epoxy matrix resins for high temperature prepreg composites. Polym. Prepr. 52(2), 91 (2011)
Mahrholz, T., Mosch, J., Röstermundt, D., Riedel, U., Herbeck, L.: New high-performance fibre reinforced materials with nanocomposites. In: Materials for Aerospace Applications, 24–26 Nov 2003
Zhou, Y., Baseer, M.A., Mahfuz, H., Jeelani, S.: Fabrication and evaluation on nano-phased unidirectional carbon fiber reinforced epoxy. J. Mater. Sci. 47, 5002–5012 (2012)
Shih, C., Katoh, Y., Ozawa, K., Snead, L.: Interlaminar shear strength and trans-thickness tensile strength of CVI and NITE Sic/Sic composites. In: Fusion Reactor Materials Program DOE/ER-0313/52, vol. 52 (2012)
Song, Y.S.: Multiscale fiber-reinforced composites prepared by vacuum-assisted resin transfer molding. Polym. Compos. 28, 459 (2007)
Suraj, R., Koohbor, B., Kidane, A.: On the meso-macro scale deformation of low carbon steel. In: Advancement of Optical Methods in Experimental Mechanics, vol. 3, pp. 409–414. Springer International Publishing (2015)
Acknowledgment
The financial support of the National Science Foundation under Grant No EEC-1342379 is gratefully acknowledged. Royal Tencate Corporate is also gratefully aknowledged for providing the materials.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Tessema, A., Mitchell, W., Koohbor, B., Ravindran, S., Kidane, A., Van Tooren, M. (2016). On the Mechanical Response of Polymer Fiber Composites Reinforced with Nanoparticles. In: Ralph, C., Silberstein, M., Thakre, P., Singh, R. (eds) Mechanics of Composite and Multi-functional Materials, Volume 7. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-21762-8_15
Download citation
DOI: https://doi.org/10.1007/978-3-319-21762-8_15
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-21761-1
Online ISBN: 978-3-319-21762-8
eBook Packages: EngineeringEngineering (R0)