Abstract
Size reduction is an integral part of mineral processing which has the largest contribution to the energy consumption of mineral processing plants. This chapter provides an overview of size reduction theories and describes different mechanisms of breakage which are relevant in the mineral processing context, along with ore characterisation tests which measure the response of ore to different mechanisms of breakage. The most common comminution machines found in mineral processing are briefly described with explanations of how such equipment are typically laid out in comminution circuits. Concepts of novel approaches to designing flexible circuits are presented followed by process operation control strategies. Fine grinding, becoming an integral part of many mineral processing circuits, is also covered in this chapter along with appropriate placements for applications of fine grinding machines and important operating parameters. This chapter covers aspects of comminution which are relevant to mineral processing only and does not extends to other areas such as food, chemical, pharmaceutical, etc.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ballantyne, G.R., Powell, M.S.: Benchmarking comminution energy consumption for the processing of copper and gold ores. Miner. Eng. 65, 109–114 (2014)
Banini, G.A.: An Integrated Description of Rock Breakage in Comminution Machines [Online]. The University of Queensland, St Lucia (2000)
Belidor, B.F.: Nouveau cours de mathématique à l’usage d’Artillerie et du Génie. Chez Charles-Antonie Jombert, Paris (1725)
Bond, F.C.: The third theory of comminution. Trans. AIME 193, 484–494 (1952)
Bond, F.C.: Crushing and grinding calculations, part I. Br. Chem. Eng. 6, 378–385 (1961)
Bond, F.C.: Crushing and grinding calculations, part II. Br. Chem. Eng. 6, 543–548 (1961)
Bourgeois, F.S., Banini, G.A.: A portable load cell for in-situ ore impact breakage testing. Int. J. Miner. Process. 74S(65), 31–54 (2002)
Brown, G.J., Miles, N.J.: Applied fractal geometry in impact pulverisation. The XIX International Mineral Processing Congress. San Francisco (1995)
Burford, B.D., Clark, L.W.: IsaMill™ technology used in efficient grinding circuits. VIII International Conference on Non-Ferrous Ore Processing. Poland (2007)
Curry, J.A., Ismay, M.J.L., Jameson, G.J.: Mine operating costs and the potential impacts of energy and grinding. Min. Eng. 56, 70–80 (2014)
Davey, G.: Fine grinding applicants using the Metso VertiMill grinding mill and the Metso Stirred Media Detritor (SMD) in gold processing. 38th Annual Meeting of the Canadian Mineral Processors Ottawa, Canada (2006)
DOE: Comminution and Energy Consumption: Report of the Committee on Comminution and Energy Consumption. National Materials Advisory Board, Commission on Sociotechnical Systems, National Research Council, Washington, DC (1981)
DOE: Mining industry of the future: energy and environmental profile of the U.S. mining industry. In: U.S. Department of Energy & Office of Energy Efficiency and Renewable Energy (eds.). BCS, Incorporated. U.S. Energy Information Administration (EIA), Washington DC (2002)
DOE: Mineral industry energy bandwidth study. U.S. Department of Energy – Industrial Technologies Program (2007)
Dorai, S.V.: Energy Analysis of Gold Mining Plants: Case Studies and Technology Analysis – An Australian Case Scenario (MSc). Masters of Science (Industrial Ecology), Chalmers University of Technology, Sweden (2006)
Dundar, H., Benzar, H., Aydogan, N.: Application of population balance model to HPGR crushing. Min. Eng. 50–51, 114–120 (2013)
Evertsson, C.M., Bearman, R.A.: Investigation of interparticle breakage as applied to cone crusher. Min. Eng. 10, 199–214 (1997)
Fischer-Cripps, A.C.: Introduction to Contact Mechanics, 2nd edn. Springer, New South Wales (2007)
Foggiatto, B., Hilden, M.M., Powell, M.S.: Advances in the simulation of Flexible circuits. 12th Mill Operators’ Conference. AusIMM, Townsville (2014)
Gilvarry, J.J., Bergstrom, B.H.: Fracture of brittle solids, II. Distribution function for fragment size in single fracture experimental. J. Appl. Phys. 32, 400–410 (1961)
Griffith, A.A.: The phenomena of rupture and flow in solids. Philos. Trans. R. Soc. Lond. A 221, 163–198 (1921)
Hukki, R.T.: Proposal for a solomonic settlement between the theories of von Rittinger, Kick and Bond. Trans. AIME 223, 403–408 (1962)
Kick, F.: Das Gesetz des proportionalen Widerstands und seine Anwendug. In: Leipzig, F. (ed.), Leipzig, Germany (1885)
King, R.P.: Modeling and Simulation of Mineral Processing Systems. Butterworth-Heinemann publications, Boston (2001)
La Nauze, R.D., Temos, J.: Technologies for sustainable operations. Council for Mining and Metallurgical Institutions Congress. Cairns, (2002)
Lynch, A.J.: Mineral Crushing and Grinding Circuits – Their Simulation, Optimisation, Design and Control. Elsevier Scientific Publishing Company, New York (1977)
Lynch, A.J., Rowland, C.A.: The History of Grinding. Society for Mining, Metallurgy and Exploration, Inc. (SME), Littleton (2005)
Man, Y.T.: A Model-Based Scale-Up Procedure for Wet, Overflow Ball Mills. Ph.D., The University of Queensland, Australia (1999)
Marktscheffel, M., Schönert, K.: Liberation of composite particles by single particle compression, shear and impact loading. 6th European Symposium Comminution. Nürnberg (1986)
Marsden, J.O.: Energy efficiency and copper hydrometallurgy. 6th International Symposium of Hydrometallurgy. Society for Mining, Metallurgy and Exploration (2008)
Mcsaveney, M.J., Davies, T.R.: Surface energy is not one of the energy losses in rock comminution. Eng. Geol. 109, 109–113 (2009)
Morrell, A., Antony, S., Kohlhagen, G., Pommier, Y., Cushman, M.: Synthesis of benz[d]indeno[1,2-b]pyran-5,11-diones: versatile intermediates for the design and synthesis of topoisomerase I inhibitors. Bioorg. Med. Chem. Lett. 16, 1846–1849 (2006)
Morrell, S.: An alternative energy-size relationship to that proposed by Bond for the design and optimisation of grinding circuits. Int. J. Miner. Process. 74, 133–141 (2004)
Morrell, S.: Design of AG/SAG mill circuits using the SMC test. International Autogenous and Semi-Autogenous Grinding Technology. Vancouver, Canada (2006a)
Morrell, S.: Rock characterisation for high pressure grinding rolls circuit design. International Autogenous and SemiAutogenous Grinding Technology Vancouver, Canada (2006b)
Morrell, S.: A method for predicting the specific energy requirement of comminution circuits and assessing their energy utilisation efficiency. Min. Eng. 21, 224–233 (2008)
Morrell, S.: Predicting the overall specific energy requirement of crushing, high pressure grinding roll and tumbling mill circuits. Min. Eng. 22, 544–549 (2009)
Morrell, S.: Mapping orebody hardness variability for AG/SAG/crushing and HPGR circuit. International Autogenous and Semi-Autogenous Grinding Technology. Vancouver, Canada (2011)
Napier-Munn, T.: Is progress in energy-efficient comminution doomed? Comminution’14, 2014 Capetown, South Africa
Napier-Munn, T.J., Morrell, S., Morrison, R.D., Kojovic, T.: Mineral Comminution Circuits: Their Operation and Optimisation. Julius Kruttschnitt Mineral Research Centre, Indooroopilly (1996)
Napier-Munn, T.J., Morrell, S., Morrison, R.D., Kojovic, T.: Mineral Comminution Circuits – Their Operation and Optimisation. Julius Kruttschnitt Mineral Research Centre, Brisbane (2005)
Narayanan, S.S.: Development of a Laboratory Single Particle Breakage Technique and Its Application to Ball Mill Scale-Up. Ph.D., The University of Queensland, Australia (1985)
Narayanan, S.S., Whiten, W.J.: Determination of comminution characteristics from single particle breakage tests and its application to ball mill scale-up. Trans. Inst. Min. Metall. Sect. C: Min. Process. Extraction Metall. 97, C115–C124 (1988)
Northparkes: Energy savings action plan: Northparkes mine. In: Bond, K., PTY Ltd (eds.), Australia (2006)
Oxford Dictionary: Oxford Dictionary of English. In: Stevenson, A. (ed.) Oxford Dictionary of English, 3rd edn. Oxford University Press. China Translation & Printing Services Ltd, China (2010)
Palaniandy, S., Powell, M., Hilden, M., Allen, J., Kermanshahi, K.: VertiMill® – Preparing the feed within floatable regime at lower specific energy. Comminution 14. Cape Town, South Africa (2014)
Palaniandy, S., Powell, M., Hilden, M., Kermanshahi, K., Allen, J., Mwansa, S.: VertiMill® – Development of circuit survey and performance evaluation protocols. Metplant 2013. Perth, Australia (2013)
Powell, M.S., Bye, A.R.: Beyond mine-to-mill – circuit design for energy efficient resource utilisation. Tenth Mill Operators’ Conference. AusIMM, Adelaide (2009)
Rittinger, P.R.: Lehrbuch der Aufbereitungskunde. Ernst and Korn, Berlin (1867)
Rumpf, H.: Physical aspects of comminution and a new formulation of a law of comminution. Powder Technol. 7, 145–159 (1973)
Sarabakos, G.D., Kosaropoulos, A.E.: Handbook of Food Processing Equipment. Kluwer Academic/Plenum Publishing, New York (2002)
Schilde, C., Burmeister, C.F., Kwade, A.: Measurement and simulation of micromechanical properties of nanostructured aggregates via nanoindentation and DEM-simulation. Powder Technol. 259, 1–13 (2014)
Schönert, K.: Role of fracture physics in understanding comminution phenomena. Trans. Soc. Min. Eng. AIME 252, 21–26 (1972)
Schubert, H.: On the microprocesses of comminution. Aufbereitungstechnik Tech. 5, 237–246 (1987)
Shi, F.: Comparison of grinding media—Cylpebs versus balls. Min. Eng. 17, 1259–1268 (2004)
Shi, F.: Coal breakage characterisation part 2: multi-component modelling. Fuel 117, 1156–1162 (2014)
Shi, F., Kojovic, T.: Validation of a model for impact breakage incorporating particle size effect. Int. J. Miner. Process. 82, 156–163 (2007)
Shi, F., Kojovic, T.: Comparison of impact breakage characterisation methods between the JK Rotary Breakage Tester and drop weight tester. International Autogenous and SemiAutogenous Grinding Technology Vancouver, Canada (2011)
Shi, F., Kojovic, T., Larbi-Bram, S., Manlapig, E.: Development of a rapid particle breakage characterization device-the JKRBT. Min. Eng. 22, 602–612 (2009)
Shi, F., Xie, W.: A specific energy-based size reduction model for batch grinding ball mill. Mineral. Eng. 70, 130–140 (2014)
Shi, F., Zuo, W.: Coal breakage characterisation part 1: breakage testing with the JKFBC. Fuel 117, 1148–1155 (2014)
Sloan, R., Parker, S., Craven, J., Schaffer, M.: Expert systems on SAG circuits: Three comparative case studies. International Autogenous and SemiAutogenous Grinding Technology Vancouver, Canada (2001)
SMC WEBSITE: About the SMC test [Online]. http://www.smctesting.com/about (2015). Accessed 2 Feb 2015
Stamboliadis, E.T.: The energy distribution theory of comminution specific surface energy, mill efficiency and distribution mode. Min. Eng. 20, 140–145 (2007)
Starkey, J., Dobby, G., Kosick, G.: A new tool for hardness testing. 26th Annual Meeting of the Canadian Mineral Processors Ottawa Canada (1994)
Tavares, L.M.: Breakage of single particles: quasi-static. In: Salman, A.D., Hounslow, M.J., Ghadiri, M. (eds.): Handbook of Powder Technology. Elsevier B.V., Oxford (2007)
Tavares, L.M., King, R.P.: Single-particle fracture under impact loading. Int. J. Miner. Process. 54, 1–28 (1998)
Van Der Meer, F.P., Gruendken, A.: Flowsheet considerations for optimal use of high pressure grinding rolls. Min. Eng. 23, 663–669 (2010)
Vogel, L., Peukert, W.: Determination of material properties relevant to grinding by practicable labscale milling tests. Int. J. Miner. Process. 74S, 329–338 (2004)
Walker, W.H.: Principles of Chemical Engineering. McGraw-Hill, New York (1937)
Wang, Y., Forssberg, E.: Enhancement of energy efficiency for mechanical production of fine and ultra-fine particles in comminution. China Particuology 5, 193–201 (2007)
Weibull, W.: A statistical distribution function of wide applicability. J. Appl. Mech. 9, 293–297 (1951)
Weichert, R.: Correlation between probability of breakage and fragment size distribution of mineral particles. Int. J. Miner. Process. 22, 1–8 (1988)
Weichert, R., Herbst, J.A.: An ultrafast load cell device for measuring particle breakage. 1st World Congress of Particle Technology. Nürnberg (1986)
Wills, B.A., Napier-Munn, T.J.: Will’s Mineral Processing Technology. Elsevier Science & Technology Books, London (2006)
Yahyaei, M., Weerasekara, N.S., Powell, M.S.: Characterisation of superficial breakage using multi-size pilot mills. Min. Eng. 81, 71–78 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Yahyaei, M., Hilden, M., Shi, F., Liu, L.X., Ballantyne, G., Palaniandy, S. (2016). Comminution. In: Merkus, H., Meesters, G. (eds) Production, Handling and Characterization of Particulate Materials. Particle Technology Series, vol 25. Springer, Cham. https://doi.org/10.1007/978-3-319-20949-4_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-20949-4_6
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-20948-7
Online ISBN: 978-3-319-20949-4
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)