Abstract
Modern high performance computers connect hundreds of thousands of endpoints and employ thousands of switches. This allows for a great deal of freedom in the design of the network topology. At the same time, due to the sheer numbers and complexity involved, it becomes more challenging to easily distinguish between promising and improper designs. With ever increasing line rates and advances in optical interconnects, there is a need for renewed design methodologies that comprehensively capture the requirements and expose trade-offs expeditiously in this complex design space. We introduce a systematic approach, based on Generalized Moore Graphs, allowing one to quickly gauge the ideal level of connectivity required for a given number of end-points and traffic hypothesis, and to collect insight on the role of the switch radix in the topology cost. Based on this approach, we present a methodology for the identification of Pareto-optimal topologies. We apply our method to a practical case with 25,000 nodes and present the results.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Each switch is connected on average to R others with n links, thus nSR ports are occupied in total. As each link connects two ports, the number of links is nSR/2. Since each link is assumed bidirectional, it represents two units of capacity so the total capacity is nSR.
- 2.
Topological distance refers to the number of hops achieved over the topology itself and excludes access and egress hops. A topological distance of 0 reflects the situation where messages are immediately forwarded to their final destination after hitting the first switch.
- 3.
In the Flattened Butterfly topology, all vertices sharing a dimension in the lattice as interconnected (Full-Mesh). In a torus, all these vertices are connected along a ring. In our 2-dimensional construction, vertices sharing a dimension are interconnected by following the structure of the largest known graph for a given diameter and maximum degree.
References
Nikolova, D., Rumley, S., Calhoun, D., Li, Q., Hendry, R., Samadi, P., Bergman, K.: Scaling silicon photonic switch fabrics for data center interconnection networks. Opt. Express 23(2), 1159–1175 (2015)
Lee, B.G., Dupuis, N., Pepeljugoski, P., Schares, L., Budd, R., Bickford, J.R., Schow, C.L.: Silicon photonic switch fabrics in computer communications systems. IEEE Journal of Lightwave Technology (in press)
Kim, J., Dally, W.J., Abts, D.: Flattened butterfly: a cost-efficient topology for high-radix networks. In: Proceedings of the International Symposium on Computer Architecture (ISCA), pp. 126–137 (2007)
Bhatelé, A., Kalé, L.V.: Benefits of topology aware mapping for mesh interconnects. Parallel Program. Lett. 18(4), 549–566 (2008)
Dally, W.J.: Principles and Practices of Interconnection Networks. Morgan Kaufmann, San Francisco (2004)
Leiserson, C.E.: Fat-trees: universal networks for hardware-efficient supercomputing. IEEE Trans. Comput. C-43(10), 892–901 (1985)
Sano, K.: Interconnection Network: Design Space Exploration of Networks for Supercomputers. Sustained Simulation Performance, Springer, 151–161, 2015
Borkar, S.: Role of interconnects in the future of computing. IEEE J. Lightwave Technol. (JLT) 31(24), 3927–3933 (2013)
Rumley, S., et al.: Silicon photonics for exascale systems. IEEE J. Lightwave Technol. (JLT) 33(3), 547–562 (2015)
Bradonjic, M., Saniee, I., Widjaja, I.: Scaling of capacity and reliability in data center networks. In: Proceedings of the SIGMETRICS (2014)
Faanes, G., et al.: Cray cascade: a scalable HPC system based on a Dragonfly network. In: Proceedings of the International Conference on High Performance Computing, Networking Storage and Analysis (SC 2012) (2012)
Singla, A., Hong, C.-Y., Popa, L., Godfrey, P.B.: Jellyfish: networking data centers randomly. In: Proceedings of the USENIX Symposium on Networked Systems Design and Implementation (NSDI 2012) 2012
Besta, M., Hoefler, T.: Slim fly: a cost effective low-diameter network topology. In: Proceedings of the International Conference on High Performance Computing, Networking Storage and Analysis (SC 2014) (2014)
Preparata, F.P., Vuillemin, J.: The cube-connected cycles: a versatile network for parallel computation. Commun. ACM 24(5), 300–309 (1981)
Bhuyan, L.N., Agrawal, D.P.: Generalized hypercube and hyperbus structures for a computer network. IEEE Trans. Comput. C-33(4), 323–333 (1984)
Pease, M.C.: The indirect binary n-Cube microprocessor array. IEEE Trans. Comput. C-26(5), 478–482 (1977)
Dally, W.J.: Performance analysis of k-ary n-cube interconnection networks. IEEE Trans. Comput. 39(6), 775–785 (1990)
Benes, V.E.: Optical rearrangeable multistage connecting networks. Bell Syst. Tech. J. 43(4), 1641–1656 (1964)
Wittie, L.D.: Communication structures for large networks of microcomputers. IEEE Trans. Comput. C-30(4), 264–273 (1981)
Kim, J., Dally, W.J., Towles, B., Gupta, A.K.: Microarchitecture of a high radix router. In: Proceedings of the International Symposium on Computer Architecture (ISCA), pp. 420–431 (2005)
Scott, S., Abts, D., Kim, J., Dally, W.J.: The blackwidow high-radix clos network. In: Proceedings of the International Symposium on Computer Architecture (ISCA), pp. 16–28 (2006)
Barriuso, R., Knies, A.: 108-Port InfiniBand FDR SwitchX Switch Platform Hardware User Manual (2014)
Li, K., Mu, Y., Li, K., Min, G.: Exchanged crossed cube: a novel interconnection network for parallel computation. IEEE Trans. Parallel Distrib. Syst. (TPDS) 24(11), 2211–2219 (2013)
Von Conta, C.: Torus and other networks as communication networks with up to some hundred points. IEEE Trans. Comput. 32(7), 657–666 (1983)
Akers, S.B., Krishnamurthy, B.: A group-theoretic model for symmetric interconnection networks. IEEE Trans. Comput. 38(4), 555–566 (1989)
Hsieh, S.-Y., Hsiao, T.-T.: The k-valent graph: a new family of cayley graphs for interconnection networks. In: Proceedings of the International Conference on Parallel Processing (ICPP) (2004)
McKay, B.D., Miller, M., Sirán, J.: A note on large graphs on diameter two and given maximum degree. J. Comb. 61, 1–63 (1998)
Miller, M., Sirán, J.: Moore graphs and beyond: a survey of the degree/diameter problem. Electronic Journal of Combinatorics, Dynamic Survey D 14 (2005)
Boa, W.-T., et al.: A high-performance and cost-efficient interconnection network for high-density servers. J. Comput. Sci. Technol. 23(2), 281–292 (2014)
Samples, M.: Large networks with small diameter. In: Möhring, R.H. (ed.) WG 1997. LNCS, vol. 1335, pp. 288–302. Springer, Heidelberg (1997)
Loz, E., Sirán, J.: New record graphs in the degree-diameter problem. Autralasian J. Comb. 41, 63–80 (2008)
Koibuchi, M., Matsutani, H., Amano, H., Hsu, D.F., Casanova, H.: A case for random shortcut topologies for HPC interconnects. In: Proceedings of the International Symposium on Computer Architecture (ISCA), pp. 177–188 (2012)
Guan, K.C., Chan, V.W.S.: Cost-efficient fiber connection topology design for metropolitan area WDM networks. IEEE/OSA J. Opt. Commun. Netw. 1(1), 158–175 (2009)
Vetter, J., et al.: Quantifying architectural requirements of contemporary extreme-scale scientific applications. In: High Performance Computing Systems. Performance Modeling, Benchmarking and Simulation, Springer LNCS (2014)
Kandula, S., Sengupta, S., Greenberg, A., Patel, P., Chaiken, R.: The nature of data center traffic: measurements and analysis. In: Proceedings of the ACM Conference on Internet Measurement (IMC), pp. 202–208 (2009)
Hendry, G.: The role of optical links in HPC system interconnects. In: Proceedings of the IEEE Optical Interconnects Conference (2013)
Hammond, S., et al.: Towards a standard architectural simulation framework. In: Proceedings of the Workshop on Modeling & Simulation of Exascale Systems & Applications (2013)
Ajima, Y., Inoue, T., Hiramoto, S., Shimizu, T.: Tofu: interconnect for the K computer. Fujistu Sci. Tech. J. 48(3), 280–285 (2012)
Acknowledgement
This work has been realized in the context of Department of Energy (DoE) ASCR project “Data Movement Dominates”. It has been partly supported by the U.S. Department of Energy (DoE) National Nuclear Security Administration (NNSA) Advanced Simulation and Computing (ASC) program through contract PO1426332 with Sandia National Laboratories. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendix
Appendix
A Generalized Moore Graph can be described as follows. Consider a vertex, V, in any graph of degree R (i.e. whose vertices have never more than R incident links). V cannot have more than R direct neighbors. It also cannot have more than R(R−1) neighbors at distance 2 (each of its neighbors have R neighbors but V does not count as it is one of them), and generally cannot have more than R(R−1) D−1 neighbors at distance D. A GMG is a graph which maximally uses this expansion possibilities offered by the degree R: in a GMG graph, each vertex has exactly R direct neighbors, exactly R(R-1) i−1 neighbors at distance i (i = 2..D-1), and all the remaining vertices are at distance D. Figure 8 exemplifies the GMG concept. Because inner layers are maximally filled, there is no way to get a vertex closer without interchanging it with another vertex. This means that no distance between two vertices can be reduced, thus that the average distance in the graph is minimized.
(a) Maximal expansion possibilities for connectivity/degree R = 3 and three layers. Generalized Moore Graphs follow this structure, except that the last layer does not have to be totally filled (b) Example of Generalized Moore Graph (a 3x3 torus) (c) The 3x3 torus reorganized to show the layers (d) A representation of unfilled slots in the last layer
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Rumley, S., Glick, M., Hammond, S.D., Rodrigues, A., Bergman, K. (2015). Design Methodology for Optimizing Optical Interconnection Networks in High Performance Systems. In: Kunkel, J., Ludwig, T. (eds) High Performance Computing. ISC High Performance 2015. Lecture Notes in Computer Science(), vol 9137. Springer, Cham. https://doi.org/10.1007/978-3-319-20119-1_32
Download citation
DOI: https://doi.org/10.1007/978-3-319-20119-1_32
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-20118-4
Online ISBN: 978-3-319-20119-1
eBook Packages: Computer ScienceComputer Science (R0)