Advertisement

Laboratory Sessions: Module 3

Chapter
  • 1.8k Downloads
Part of the Power Systems book series (POWSYS)

Abstract

A series of laboratory modules will be discussed in this chapter, which have been designed to lead the reader through the development phases needed to understand and work with a sensorless field-oriented IM drive. Sensorless control implementation is based on the use of the InstaSPIN algorithm, which will be configured for different modes of operation. This implies application of the algorithm as a ‘software encoder’ as well as full motor parameter identification. In addition, a special inductance machine algorithm referred to as ‘PowerWarp’ will be discussed, which allows energy efficient operation under partial load conditions.

Keywords

Current Controller Rotor Resistance Shaft Speed Motor Identification Rotor Flux 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Supplementary material

978-3-319-20043-9_5_MOESM1_ESM.zip (260 kb)
Chapter 5 (ZIP 261 kb)

References

  1. 1.
    C2000 Systems and Applications Team (2010) Implementing Sensorless Field Oriented Control of AC Induction Motor with PFC front end running on CLA using C2000 Microcontrollers. Tech. rep., Texas Instruments, location: ControlSUITE installation directory∖development_kits∖HVMotorCtrl+PfcKit_v1.7∖PFC2PhiLCLA+ACI∖˜Docs∖PFC+ ACI_Integration.pdfGoogle Scholar
  2. 2.
    Clearman C (2014) motorware_selecting_user_variables.xlsx. Location: motorware installation directory/docs/labs/Google Scholar
  3. 3.
    Contronics (2015) Comoco intelligent motor control. URL www.comoco.nl
  4. 4.
    De Doncker R, Pulle DWJ, Veltman A (2011) Advanced Electrical Drives. Power Systems, Springer Netherlands, Dordrecht, URL link.springer.com/10.1007/978-94-007-0181-6Google Scholar
  5. 5.
    De Gusseme K, de Sype DMV, Van Den Bossche AP, Melkebeek JA (2003) Sample correction for digitally controlled boost PFC converters operating in both CCM and DCM. In: Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC ’03, IEEE, Miami Beach, Florida, vol 1, pp 389–395, DOI 10.1109/APEC.2003.1179243, URL ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=1179243Google Scholar
  6. 6.
    e-Traction (2015) e-Traction. URL www.e-traction.eu
  7. 7.
    LaunchXL (2015) LAUNCHXL-F28069m. URL www.ti.com/tool/launchxl-f28069M
  8. 8.
    LineStream (2015) LineStream Technologies. URL linestream.com
  9. 9.
    MotorWare (2015) MotorWare Software. URL www.ti.com/tool/motorware
  10. 10.
    Plecs (2015) Plecs Simulation Software for Power Electronics. URL www.plexim.com
  11. 11.
    Pulle DWJ (2015) Laboratory files for Applied Control of Electrical Drives. URL extras.springer.com
  12. 12.
    Thomas E (2015) A2spin LLC. URL www.a2spin.com
  13. 13.
    TMS320F28027 errata (2008) TMS320f28027, TMS320f28026, TMS320f28023, TMS320f28022, TMS320f28021, TMS320f28020, TMS320f280200, TMS320f280270, TMS320f280260, TMS320f280230, TMS320f280220 Piccolo MCU Silicon Errata. URL https://www.ti.com/product/tms320f28027
  14. 14.
    Veltman A, Pulle DWJ, De Doncker RW (2007) Fundamentals of electrical drives. Power systems. Springer, Berlin. http://dx.doi.org/10.1007/978-1-4020-5504-1; http://www.springerlink.com/openurl.asp?genre=book&isbn=978-1-4020-5503-4
  15. 15.
    VisSim (2015) VisSim EmbeddedTM Suite. URL www.vissim.com/products/vissim/embedded.html
  16. 16.
    Vostermans (2015) Vostermans Ventilation. URL ventilation.vostermans.com
  17. 17.
    Walkera (2015) Walkera. URL www.walkera.com

Copyright information

© Springer International Publishing Switzerland 2015

Authors and Affiliations

  1. 1.EMsynergySydneyAustralia
  2. 2.Senior VP Altair EngineeringWestfordUSA
  3. 3.Piak Electronic DesignCulemborgThe Netherlands

Personalised recommendations