Abstract
Elastoplastic constitutive equations in a novel sense are proposed toward a direct simulation of metal fatigue failure as inherent features of elastoplastic behavior from a fresh standpoint. Such equations are established with consideration of realizing a smooth transition from the elastic to the plastic state and, in particular, characterizing asymptotic loss of the stress-bearing capacity up to failure. It is demonstrated that certain salient features of both high and low cycle fatigue failure of metals under cyclic loadings may be derived as direct consequences from these simple equations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Benzerga A, Sturovik D, Keralavarma S (2012) On the path-dependence of the fracture locus in ductile materials–analysis. Int J Plast 37:157–170
Bonora N, Gentile D, Pirondi A, Newaz G (2005) Ductile damage evolution under triaxial state of stress: theory and experiments. Int J Plast 21:981–1007
Bronkhorst C, Cerreta E, Xue Q, Maudin P, Masson T, Gray G III (2006) An experimental and numerical study of the localization behavior of tantalum and stainless steel. Int J Plast 22:1304–1335
Bruhns O, Xiao H, Meyers A (1999) A self-consistent Eulerian rate type elastoplasticity models based upon the logarithmic stress rate. Int J Plast 15:479–520
Bruhns O, Xiao H, Meyers A (2003) Some basic issues in traditional Eulerian formulations of finite elastoplasticity. Int J Plast 19:2007–2026
Bruhns O, Xiao H, Meyers A (2005) A weakened form of Ilyushin’s postulate and the structure of self-consistent Eulerian finite elastoplasticity. Int J Plast 21:199–219
Brünig M (2003a) An anisotropic ductile damage model based on irreversible thermodynamics. Int J Plast 19:1679–1713
Brünig M (2003b) Numerical analysis of anisotropic ductile continuum damage. Compt Meth Appl Mech Eng 192:2749–2776
Brünig M, Gerke S (2011) Simulation of damage evolution in ductile metals undergoing dynamic loading conditions. Int J Plast 27:1598–1617
Brünig M, Ricci S (2005) Nonlocal continuum theory of anisotropically damaged metals. Int J Plast 21:1346–1382
Brünig M, Chyra O, Albrecht D, Driemeier L, Alves M (2008) A ductile damage criterion at various stress triaxialities. Int J Plast 24:1731–1755
Brünig M, Gerke S, Hagenbrock V (2013) Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage. Int J Plast 50:49–65
Chaboche J (2008) A review of some plasticity and viscoplasticity constitutive theories. Int J Plast 24:1642–1693
Chung K, Ma N, Park T, Kim D, Yoo D, Kim C (2011) A modified damage model for advanced high strength steel sheets. Int J Plast 27:1485–1511
Giroux P, Dalle F, Sauzay M, Malaplate J, Fournier B, Gourgues-Lorenzon A (2010) Mechanical and microstructural stability of p92 steel under uniaxial tension at high temperature. Mater Sci Eng A 527:3984–3993
Jansen Y, Logé R, Milesi M, Massoni E (2013) An anisotropic stress based criterion to predict the formability and the fracture mechanism of textured zinc sheets. Trans ASME J Mater Process Technol 213:851–855
Khan A, Liu H (2012a) A new approach for ductile fracture prediction on Al 2024–T351 alloy. Int J Plast 35:1–12
Khan A, Liu H (2012b) Strain rate and temperature dependent fracture criterion for isotropic and anisotropic metals. Int J Plast 37:1–15
Kim J, Sung J, Piao K, Wagoner R, (2011) The shear fracture of dual-phase steel. Int J Plast 27:1658–1676
Malcher L, Pires F, César de Sà J (2012) An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality. Int J Plast 30–31:81–115
Ohno N (1990) Recent topics in constitutive modeling for cyclic plasticity and viscoplasticity. Appl Mech Rev 43(11):283–295
Pook L (2007) Metal fatigue. Springer, Berlin
Shojaei A, Voyadjis G, Tan P (2013) Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading. Int J Plast 48:125–151
Shyam A, Allison J, Szczepanski C, Pollock T, Jones J (2007) Small fatigue crack growth in metallic materials: a model and its application to engineering alloys. Acta Mater 55:6606–6616
Stoughton T, Yoon J (2005) Sheet metal formability analysis for anisotropic materials under non-proportional loading. Int J Mech Sci 47:1972–2002
Stoughton T, Yoon J (2011) A new approach for failure criterion for sheet metals. Int J Plast 27:440–459
Stoughton T, Yoon J (2012) Path independent forming limits in strain and stress spaces. Int J Solids Struct 49:3616–3625
Stoughton T, Zhu X (2004) Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int J Plast 20:1463–1486
Wu P, Graf A, MacEwen S, Lloyd D, Jain M, Neale K (2005) On forming limit stress diagram analysis. Int J Solids Struct 42:2225–2241
Xiao H (2014) Thermo-coupled elastoplasticity model with asymptotic loss of the material strength. Int J Plast 63:211–228
Xiao H, Bruhns O, Meyers A (1997) Logarithmic strain, logarithmic spin and logarithmic rate. Acta Mech 124:89–105
Xiao H, Bruhns O, Meyers A (2000) The choice of objective rates in finite elastoplasticty: General results on the uniqueness of the logarithmic rates. Proc Roy Soc Lond A 456:1865–1882
Xiao H, Bruhns O, Meyers A (2006) Elastoplasticity beyond small deformations. Acta Mech 182:31–111
Xiao H, Bruhns O, Meyers A (2007) Thermodynamic laws and consistent Eulerian formulations of finite elastoplasticity with thermal effects. J Mech Phys Solids 15:338–365
Xiao H, Bruhns O, Meyers A (2014) Free rate-independent elastoplastic equations. Z Angew Math Mech 94:461–476
Yoshida K, Kawabara T, Kurada M (2007) Path-dependence of the forming limit stresses in a sheet metal. Int J Plast 23:361–384
Acknowledgments
This work was carried out under the support of the start-up fund (No.: S.15-B002-09-032) for the 211-plan of the Education Committee of China and the fund (No.: 11372172) from the Natural Science Foundation of China. This support is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Wang, ZL., Xiao, H. (2015). A Study of Metal Fatigue Failure as Inherent Features of Elastoplastic Constitutive Equations. In: Altenbach, H., Matsuda, T., Okumura, D. (eds) From Creep Damage Mechanics to Homogenization Methods. Advanced Structured Materials, vol 64. Springer, Cham. https://doi.org/10.1007/978-3-319-19440-0_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-19440-0_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-19439-4
Online ISBN: 978-3-319-19440-0
eBook Packages: EngineeringEngineering (R0)