Abstract
Bio-mechanical components (i.e. spinal, knee and hip prostheses) are key elements definitely improving the quality of life of human beings. These components development has been traditionally subject to mechanical and functional designs based primarily on intuitive medical approaches, not always optimized from an engineering point of view, what in turn has been responsible for undesirable cases of mechanical failure implying the need for additional surgical interventions and its associate life risk for aged patients. Laser Shock Processing (LSP) uses the high peak power of short pulse lasers to generate an intense shock wave into the material finally leading to the generation of a compressive residual stresses field definitely protecting the component against crack initiation and propagation, thus improving its mechanical response and in-service fatigue life. Developments in the field of the predictive assessment of LSP are presented along with practical examples of the design-motivated improvements in prostheses achievable by LSP.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Sano, Y., Mukai, N., Okazaki, K., Obata, M.: Residual stress improvement in metal surface by underwater laser irradiation. Nuclear Instruments and Methods in Physics Research B 121, 432–436 (1997)
Rubio-González, C., Ocaña, J.L., Gómez-Rosas, G., Molpeceres, C., Paredes, M., Banderas, A., Porro, J.A., Morales, M.: Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy. Mat. Sci. Eng. A 386, 291–295 (2004)
Ocaña, J.L., Morales, M., Molpeceres, C., Porro, J.A.: Laser Shock Processing as a Method for Surface Properties Modification of Metallic Materials. In: Schulze, V., Niku-Lari, A. (eds.) Shot Peening and other Mechanical Surface Treatments, pp. 466–471. I.I.T.T, Paris (2005)
Sánchez-Santana, U., Rubio-González, C., Ocaña, J.L., Gómez-Rosas, G., Molpeceres, C., Porro, J.A., Morales, M.: Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing. Wear 260, 847–854 (2006)
Morales, M., Porro, J.A., Blasco, M., Molpeceres, C., Ocaña, J.L.: Numerical simulation of plasma dynamics in laser shock processing experiments. Appl. Surf. Sci. 255, 5181–5185 (2009)
Griffin, R.D., Justus, B.L., Campillo, A.J., Goldberg, L.S.: Interferometric studies of the pressure of a confined laser-heated plasma. Journal of Applied Physics 59, 1968–1971 (1986)
Fabbro, R., Fournier, J., Ballard, P., Devaux, D., Virmont, J.: Physical study of laser produced plasma in confined geometry. Journal of Applied Physics 68, 775–784 (1990)
Ocaña, J.L., Morales, M., Molpeceres, C., Torres, J.: Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments. Appl. Surf. Sci. 238, 242–248 (2004)
Morales, M., Ocaña, J.L., Molpeceres, C., Porro, J.A., García-Beltrán, A.: Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing. Surface & Coatings Technology 202, 2257–2262 (2008)
Morales, M., Porro, J.A., Molpeceres, C., Holgado, M., Ocaña, J.L.: Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-T351. Journal of Optoelectronics and Advanced Materials 12, 718–722 (2010)
Morales, M., Correa, C., Porro, J.A., Molpeceres, C., Ocaña, J.L.: Thermomechanical modelling of stress fields in metallic targets subject to laser shock processing. International Journal of Structural Integrity 2, 51–61 (2011)
MacFarlane, J.J., Golovkin, I.E., Woodruff, P.R.: HELIOS-CR A 1-D radiation-magnetohydrodynamics code with inline atomic kinetics modeling. Journal of Quantitative Spectroscopy & Radiative Transfer 99, 381–397 (2006)
Lyon, S.P., Johnson, J.D.: SESAME: Los Alamos National Laboratory Equation of State Database. Technical report LA-UR-92-3407, Los Alamos National Laboratory, Los Alamos (1992)
ABAQUS, Inc.: ABAQUS Users Manual, Pawtucket (2009)
Johnson, G.R., Cook, W.H.: A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, pp. 541–547 (1983)
Kay, G.: Failure Modeling of Titanium 6Al-4V and Aluminum 2024-T3 with the Johnson-Cook material model. Technical Report U.S. Department of Transportation DOT-FAA-AR-97-88 (2003)
Korsunsky, A.M.: Residual elastic strain due to laser shock peening: Modelling by eigenstrain distribution. The Journal of Strain Analysis for Engineering Design 41, 195–204 (2006)
Jun, T., Korsunsky, A.M.: Evaluation of residual stresses and strains using the Eigenstrain Reconstruction Method. International Journal of Solids and Structures 47, 1678–1686 (2010)
Achintha, M., Nowell, D.: Eigenstrain modelling of residual stresses generated by laser shock peening. Journal of Materials Processing Technology 211, 1091–1101 (2011)
Bordji, K., Jouzeau, J.Y., Mainard, D., Payan, E., Netter, P., Rie, K.T., Stucky, T., Hage-Ali, M.: Cytocompatibility of Ti-6Al-4V and Ti-5Al-2.5Fe alloys according to three surface treatments, using human fibroblasts and osteoblasts. Biomaterials 17, 929–940 (1996)
Savilahti, S., Myllyneva, I., Pajamaki, K.J.J., Lindholm, T.S.: Survival of Lubinus straight (IP) and curved (SP) total hip prostheses in 543 patients after 413 years. Arch. Orthop. Trauma Surg. 116, 1013 (1997)
Marston, R.A., Cobb, A.G., Bentley, G.: Stanmore compared with Charnley total hip replacement: a prospective study of 413 arthroplasties. J. Bone Joint Surg. 78-B, 178–184 (1996)
Neumann, L., Freund, K.G., Sorenson, K.H.: Long-term results of Charnley total hip replacement. Review of 92 patients at 15 to 20 years. J. Bone Joint Surg. 76-B, 245–251 (1994)
Delaunay, C.P., Kapandji, A.I.: Primary total hip arthroplasty with the Karl Zweymuller first-generation cementless prosthesis: a 5 to 9 year retrospective study. J. Arthroplasty 11, 643–652 (1996)
Campioni, I., Notarangelo, G., Andreaus, U., Ventura, A., Giacomozzi, C.: Hip prosthesis computational modeling: FEM simulations integrated with fatigue mechanical tests, Biomechanics imaging and computational modeling in biomechanics. Lecture Notes in Computational Vision and Biomechanics 4, 81–109 (2013)
Sotereanos, N.G., Engh, C.A., Glassman, A.H., Macalino, G.E.: Cementless femoral components should be made from cobalt chrome. Clin. Orthop. 313, 146–153 (1995)
Wroblewski, B.M., Sidney, P.D.: Charnley low friction arthroplasty of the hip Long term result. Clin. Orthop. 292, 191–201 (1993)
Zafer Senalp, A., Kayabasi, O., Kurtaran, H.: Static, dynamic and fatigue behavior of newly designed stem shapes for hip prosthesis using finite element analysis. Materials & Design 28, 1577–1583 (2007)
Champaigne, J.: Shot peening of orthopaedic implants for tissue adhesion. US Patent 7,131,303 (2006)
Shepard, M.J.: Laser shock processing induced residual compression: impact on predicted crack growth threshold performance. Journal of Materials Engineering and Performance 14, 495–502 (2005)
Hammersley, G., Hackel, L.A., Harris, F.: Surface prestressing to improve fatigue strength of components by laser shock peening. Optics and Lasers in Engineering 34, 327–337 (2000)
Charnley, J.: Femoral prosthesis, US Patent 4,021,865 (1977)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Ocaña, JL., García-Beltrán, Á., Correa, C., Porro, JA., Ruiz-de-Lara, L., Díaz, M. (2015). Computer-Aided Development of Thermo-Mechanical Laser Surface Treatments for the Fatigue Life Extension of Bio-Mechanical Components. In: Ferrández Vicente, J., Álvarez-Sánchez, J., de la Paz López, F., Toledo-Moreo, F., Adeli, H. (eds) Bioinspired Computation in Artificial Systems. IWINAC 2015. Lecture Notes in Computer Science(), vol 9108. Springer, Cham. https://doi.org/10.1007/978-3-319-18833-1_45
Download citation
DOI: https://doi.org/10.1007/978-3-319-18833-1_45
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-18832-4
Online ISBN: 978-3-319-18833-1
eBook Packages: Computer ScienceComputer Science (R0)