Abstract
The aim of this chapter is to analyse various CO2 compression processes for post-combustion CO2 capture applications for a high-power, 900 MW (Łukowicz H, Mroncz M (2012) Basic technological concepts of a “Capture Ready” power plant. Energy fuels. ACS Publications, pp 6475–6481), pulverized coal-fired power plant. Different thermodynamically feasible CO2 compression systems will be identified and their energy consumption will be quantified. The detailed thermodynamic analysis presented below examines methods of minimizing the producer’s power penalty using integrated, low-power compression conceptions. The goal of the present research is to reduce the penalty through an analysis of different compression conceptions and to investigate the possibility of capturing compression heat and converting it to useful energy for use elsewhere in the plant.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Aartun I (2002) Carbon dioxide, CO2, Pressure-Enthalpy diagram. Based on the program allprops, NTNU. Center for Applied Thermodynamic Studies, University of Idaho
Angus S, Armstrong B, Reuck KM (1976) International thermodynamic tables of the fluid state. Volume 3 carbon dioxide. International Union of Pure and Applied Chemistry (IUPAC), Pergamon Press, Oxford
Aspen HYSYS (2008) Version 7.0, User Guide
Baldwin P, Wiliams J (2009) Capturing CO2: gas compression versus liquefaction. Power Magazine, 1 June 2009
Botero C, Finkenrath M, Belloni C, Bertolo S, D’Ercole M, Gori E, Tacconelli R (2009) Thermoeconomic evaluation of CO2 compression strategies for post-combustion CO2 capture applications. In: Proceedings of ASME turbo expo 2009
Bovon PR, Habel R (2007) Compression challangers. In: ASME turbo expo
Colby GM, Griffin TR, Gupta MK, Miller HF, Nove SE, Sehlstedt NH (2012) High pressure compressor testing for Tupi 1, Tupi 2, and Tupi 3. In: Proceedings of ASME turbo expo 2012, Dresser Rand Company
Edmister WC, Lee BI (1984) Applied hydrocarbon thermodynamics, vol 1, 2nd Edn. Gulf Publishing Company, Houston
Gresh MT (1991) Compressor performance. Butterworth-Heinemann, Boston
Habel R (2012) Advanced compression technology for CCS, EOR, refrigeration and vapour. Special section—CO2 compression. Carbon Capture Journal, Sept–Oct 2012
Jockenhovel T et al (2009) Optimal power plant integration of post-combustion CO2 capture. In: Siemens, POWER-GEN Europe 2009
Kidd HA, Miller HF (2010) Compression solutions for CO2 applications (Traditional Centrifugal and Supersonic Technology). Engineer’s Notebook, Olean, New York, USA
Koopman AA, Bahr DA (2010) The Impact of CO2 compressor characteristics and integration in post-combustion carbon sequestration comparative economic analysis. In: Proceedings of ASME turbo expo 2010
Lawlor S (2010) CO2 Compression using supersonic shock wave technology. Ramgen Power System
Lupkes K (2012) Ramgen supersonic shock wave compression and engine technology. NETL CO2 Capture Technology Meeting, Pittsburgh, PA, July 11, 2012
Lüdtke KH (2004) Process centrifugal compressors. Springer, Berlin
Łukowicz H, Mroncz M (2012) Basic technological concepts of a “Capture Ready” power plant. Energy fuels. ACS Publications, pp 6475–6481
Moore JJ, Nored MG (2008) Novel concepts for the compression of large volumes of carbon dioxide. In: Proceedings of ASME turbo expo 2008
Moran MJ, Shapiro HN (1988) Fundamentals of engineering thermodynamics. Wiley, New York
National Institute of Standards and Technology (NIST) Thermophysical properties of fluid systems, http://webbook.nist.gov/chemistry/fluid
Ramgen Power Systems (2009) Workshop on future large CO2 compression systems. Gaithersburg, 30–31 March 2009
Schultz J (1962) The polytropic analysis of centrifugal compressors. J Eng Power 84:69–182
Singh D, Croiset E, Douglas PL, Douglas MA (2003) Techno-economic study of CO2 capture from an existing coal-fired power plant: MEA scrubbing versus O2/CO2 recycle combustion. Energy Convers Manage 44:3073–3091
Span R, Wagner W (1966) A new equation of state for carbon dioxide covering the fluid region from the triple point temperature to 1100 K at a pressure up to 800 MPa. J Phys Chem Ref Data 6:1509–1596
STC-GV, STC-GVT Siemens Turbocompressor (2009) Integrally Geared, Vertically Split Volute Casing Siemens turbocompressors. Answers for energy
VDI 2045 (1993) Acceptance and performance tests on turbocompressors and displacement compressors. Theory and examples. Düsseldorf
Witkowski A, Majkut M (2012) The impact of CO2 compression systems on the compressor power required for pulverized coal-fired plant in post-combustion carbon dioxide sequestration. Archive Mech Eng LIX(3):344–360
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 The Author(s)
About this chapter
Cite this chapter
Witkowski, A., Majkut, M. (2015). Compression and Pumping Technology Options. In: Advances in Carbon Dioxide Compression and Pipeline Transportation Processes. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-18404-3_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-18404-3_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-18403-6
Online ISBN: 978-3-319-18404-3
eBook Packages: EnergyEnergy (R0)