Abstract
Artificial intelligence methods play an important role in solving an optimization problem in well log analysis. Global optimization procedures such as genetic algorithms and simulated annealing methods offer robust and highly accurate solution to several problems in petroleum geosciences. According to experience, these methods can be used effectively in the solution of well-logging inverse problems. Traditional inversion methods are used to process the borehole geophysical data collected at a given depth point. As having barely more types of probes than unknowns in a given depth, a set of marginally over-determined inverse problems has to be solved along a borehole. This single inversion scheme represents a relatively noise-sensitive interpretation procedure. For the reduction of noise, the degree of over-determination of the inverse problem must be increased. To fulfill this requirement, the so-called interval inversion method is developed, which inverts all data from a greater depth interval jointly to estimate petrophysical parameters of hydrocarbon reservoirs to the same interval. The chapter gives a detailed description of the interval inversion problem, which is solved by a series expansion-based discretization technique. Different types of basis functions can be used in series expansion depending on the geological structure to treat much more data against unknowns. The high degree of over-determination significantly increases the accuracy of parameter estimation. The quality improvement in the accuracy of estimated model parameters often leads to a more reliable calculation of hydrocarbon reserves. The knowledge of formation boundaries is also required for reserve calculation. Well logs do contain information about layer thicknesses, which cannot be extracted by the traditional local inversion approach. The interval inversion method is applicable to derive the layer boundary coordinates and certain zone parameters involved in the interpretation problem automatically. In this chapter, it is analyzed how to apply a fully automated procedure for the determination of rock interfaces and petrophysical parameters of hydrocarbon formations. Cluster analysis of well-logging data is performed as a preliminary data processing step before inversion. The analysis of cluster number log allows the separation of formations and gives an initial estimate for layer thicknesses. In the global inversion phase, the model including petrophysical parameters and layer boundary coordinates is progressively refined to achieve an optimal solution. The very fast simulated re-annealing method ensures the best fit between the measured data and theoretical data calculated on the model. The inversion methodology is demonstrated by a hydrocarbon field example, which shows an application for shaly sand reservoirs. The theoretical part of the chapter gives a detailed mathematical formulation of the inverse problem, while the case study focuses on the practical details of its solution by using artificial intelligence tools.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alberty M, Hashmy KH (1984) Application of ULTRA to log analysis. SPWLA 25th annual logging symposium, New Orleans, Paper Z, 10–13 June 1984
Ball SM, Chace DM, Fertl WH (1987) The well data system (WDS): an advanced formation evaluation concept in a microcomputer environment. In: Proceedings of SPE eastern regional meeting, Paper 17034, pp 61–85
Dobróka M (1995) The introduction of joint inversion algorithms into well log interpretation (in Hungarian). Scientific report, Geophysical Department, University of Miskolc
Dobróka M, Szabó NP (2005) Combined global/linear inversion of well-logging data in layer-wise homogeneous and inhomogeneous media. Acta Geod Geophys Hung 40:203–214
Dobróka M, Szabó NP (2011) Interval inversion of well-logging data for objective determination of textural parameters. Acta Geophys 59(5):907–934
Dobróka M, Szabó NP (2012) Interval inversion of well-logging data for automatic determination of formation boundaries by using a float-encoded genetic algorithm. J Petrol Sci Eng 86–87:144–152
Dobróka M, Szabó NP, Turai E (2012) Interval inversion of borehole data for petrophysical characterization of complex reservoirs. Acta Geod Geophys Hung 47(2):172–184
Geman S, Geman D (1984) Stochastic relaxation, Gibbs’ distribution and Bayesian restoration of images. IEEE Trans PAMI 6:721–741
Ingber L (1989) Very fast simulated reannealing. Math Comput Model 12(8):967–993
Mayer C, Sibbit A (1980) GLOBAL, a new approach to computer-processed log interpretation. In: Proceedings of SPE annual fall technical conference and exhibition, Paper 9341, pp 1–14
Metropolis N, Rosenbluth A, Rosenbluth M, Teller A, Teller E (1953) Equation of state calculations by fast computing machines. J Chem Phys 21:1087–1092
Serra O (1984) Fundamentals of well-log interpretation. Elsevier, Amsterdam
Szabó NP, Dobróka M (2013) Float-encoded genetic algorithm used for the inversion processing of well-logging data. In: Michalski A (ed) Global optimization: theory, developments and applications. Mathematics research developments, computational mathematics and analysis series. Nova Science Publishers Inc., New York
Szabó NP, Dobróka M, Kavanda R (2013) Cluster analysis assisted float-encoded genetic algorithm for a more automated characterization of hydrocarbon reservoirs. Intell Control Autom 4(4):362–370
Timur A (1968) An investigation of permeability, porosity and residual water saturation relationships for sandstone reservoirs. Log Analyst 9:8–17
Ward JH (1963) Hierarchical grouping to optimize an objective function. J Am Stat Assoc 58(301):236–244
Acknowledgments
The first author as the leading researcher of Project No. K 109441 thanks to the support of the Hungarian Scientific Research Fund. The second author as the leading researcher of Project No. PD 109408 thanks to the support of the Hungarian Scientific Research Fund. The second author also thanks to the support of the János Bolyai Research Fellowship of the Hungarian Academy of Sciences. The authors thank the Hungarian Oil and Gas Company’s (MOL) contribution to the research work and the long-term cooperation. The authors also thank Hajnalka Szegedi for improving the manuscript formally.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Dobróka, M., Szabó, N.P. (2015). Well Log Analysis by Global Optimization-based Interval Inversion Method. In: Cranganu, C., Luchian, H., Breaban, M. (eds) Artificial Intelligent Approaches in Petroleum Geosciences. Springer, Cham. https://doi.org/10.1007/978-3-319-16531-8_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-16531-8_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16530-1
Online ISBN: 978-3-319-16531-8
eBook Packages: EnergyEnergy (R0)