Abstract
The demand for a traceable dynamic torque measurement increased over the last years. Procedures for a dynamic calibration of torque transducers have been developed in an European metrology research project. In the scope of this project, a dynamic measuring device was developed, and the corresponding mechanical modelling, which also includes the transducer under test, was investigated. The dynamic behaviour of the torque transducer is described by the parameters of its model. These model parameters will be identified from measurement data. The model-based approach for the description of the dynamic behaviour of torque transducers and model parameter identification procedures are described in this paper.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bartoli C, et al. (2013) Traceable dynamic measurement of mechanical quantities: objectives and first results of this European project. Int J Metrol Qual Eng 3(3):127–135. doi:10.1051/ijmqe/2012020
Bartoli C, et al. (2014) Dynamic calibration of force, torque and pressure sensors. In: Proceedings of joint IMEKO international TC3, TC5 and TC22 conference 2014, Cape Town, South Africa, Feb 2014
Bruns T (2003) Sinusoidal torque calibration: a design for traceability in dynamic torque calibration. In: Proceedings of XVII IMEKO world congress–metrology in the 3rd millennium, Dubrovnik, Croatia, Jun 2003
ISO TC 43, ISO 266:1997, Acoustics: preferred frequencies for measurements. International Organization for Standardization (ISO), Geneva, Switzerland, 1997
Klaus L, Bruns T, Kobusch M (2012) Determination of model parameters for a dynamic torque calibration device. In: Proceedings of XX IMEKO world congress, Busan, Republic of Korea, Sep 2012
Klaus L, Kobusch M (2014) Experimental method for the non-contact measurement of rotational damping. In: Proceedings of joint IMEKO international TC3, TC5 and TC22 conference 2014, Cape Town, South Africa, Feb 2014
Klaus L, Arendacká B, Kobusch M, Bruns T (2014) Model parameter identification from measurement data for dynamic torque calibration. In: Proceedings of joint IMEKO international TC3, TC5 and TC22 conference 2014, Cape Town, South Africa, Feb 2014
Beug MF, Moser H, Ramm G (2012) Dynamic bridge standard for strain gauge bridge amplifier calibration. In: Proceedings of conference on precision electromagnetic measurements (CPEM), pp 568–569, Washington DC, United States, Jul 2012. doi:10.1109/CPEM.2012.6251056
Klaus L, Bruns T, Volkers H (2015) Calibration of bridge-, charge- and voltage amplifiers for dynamic measurement applications. Metrologia 52(1):72–81. doi:10.1088/0026-1394/52/1/72
Klaus L, Arendacká B, Kobusch M, Bruns T (2015) Dynamic torque calibration by means of model parameter identification, ACTA IMEKO (2015 in press)
Acknowledgements
The authors would like to thank their colleague Barbora Arendacká from Working Group 8.42 Data Analysis and Measurement Uncertainty of PTB for the helpful recommendations and the support for system simulation and model parameter identification.
This work is part of the Joint Research Project IND09 Traceable Dynamic Measurement of Mechanical Quantities of the European Metrology Research Programme (EMRP). The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Klaus, L., Kobusch, M., Bruns, T. (2015). A Model-Based Approach for the Dynamic Calibration of Torque Transducers. In: Wee Sit, E. (eds) Sensors and Instrumentation, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-15212-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-15212-7_8
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-15211-0
Online ISBN: 978-3-319-15212-7
eBook Packages: EngineeringEngineering (R0)