Abstract
Several modern aspects of the severe accident analysis can not be understood if the engineer does not have accurate information of the material properties for the participating structural materials in solid, in liquid and in some cases in gaseous states. Chapter 17 contains valuable sets of thermo-physical and transport properties for severe accident analysis for the following materials: uranium dioxide, zirconium dioxide, stainless steel, zirconium, aluminum, aluminum oxide, silicon dioxide, iron oxide, molybdenum, boron oxide, reactor corium, sodium, lead, bismuth and leadbismuth alloys. The emphasis is on the complete and consistent thermo dynamical sets of analytical approximations appropriate for computational analysis.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Chu, C.C., Sieniki, J.J., Beker Jr., L.: Uncertainty analysis for thermophysical properties used in in-vessel retention analysis. In: Theophanous, T.G., et al. (eds.) In-vessel Coolability and Retention of a Core Melt, DOE/ID-10460, vol. 1. U.S. Department of Energy Report (October 1996)
Kolev, N.I.: Multiphase Flow Dynamics, Fundamentals, vol. 1. Springer, New York (2007)
McCahan, S., Shepherd, J.E.: A thermodynamic model for aluminum-water interaction. In: Proc. of the CSNI Specialists Meeting on Fuel-Coolant Interaction, Santa Barbara, California, NUREC/CP-0127 (January 1993)
Allison, C.M., et al.: SCDAP/RELAP/MOD3.1 Code manuals, MATPRO – A library of materials properties for light-water-reactor accident analysis, NUREG/CR-6150, EGG-2720, vol. 4 (1993)
Brassfield, H.C., et al.: Recommended property and reactor kinetics data for use in evaluating a light-water-coolant reactor loss-of-coolant incident involving Zircaloy-4 or 304-SS-clad UO2, GEMP-482 (April 1968)
Breitung, W., Reil, K.O.: In-pile vapor pressure measurements on UO2 and (U, Pu)O2, Kernforschungszentrum Karlsruhe, KfK 3939 (August 1985)
Bober, M., Singer, J.: Vapor pressure determination of liquid UO2 using a boiling point technique. Nucl. Sci. Eng. 97, 344–352 (1987)
Chawla, T.C., et al.: Thermophysical properties of mixed oxide fuel and stainless steel type 316 for use in transition phase analysis. Nuclear Engineering and Design 67, 57–74 (1981)
Chu, C.C., Sieniki, J.J., Beker Jr., L.: Uncertainty analysis for thermophysical properties used in in-vessel retention analysis. In: Teofanous, T.G., et al. (eds.) In-vessel Coolability and Retention of a Core Melt, DOE/ID-10460, vol. 1 (October 1996)
Gmelin: Handbook of Inorganic Chemistry, 8th edn., suppl. vol. C5, Chap. 4.8.6: Thermal conductivity. Springer, Berlin (1986)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Thermodynamic properties of uranium dioxide, ANL-CEN-RSD-80-3 (April 1981a)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Thermo-physical properties of uranium dioxide. J. Nucl. Mater. 102, 17–25 (1981b)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Properties for safety analysis, ANL-CEN-RSD-82-2 (1982)
Fink, J.K., Leibowitz, L.: An analysis of measurements of the thermal conductivity of liquid urania. High Temperatures-High Pressures 17, 17–26 (1985)
Fischer, E.A.: A new evaluation of the urania equation of state based on recent vapor pressure. Nucl. Sci. Eng. 101, 97–116 (1989)
Fischer, E.A.: Fuel evaluation of state data for use in fast reactor accident analysis codes, KfK 4889, Kernforschungszentrum Karlsruhe (May 1992)
Hagrman, D.L., Laats, E.T., Olsen, C.S.: In: Hohorst, J.K. (ed.) SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Hendricks, R.C., Baron, A.K., Peller, C.P.: GASP – A computer code for calculating the thermodynamic and transport properties for ten fluids: Parahydrogen, helium, neon, methane, nitrogen, carbon monoxide, oxygen, fluorine, argon, and carbon dioxide. NASA technical note NASA TN D-7806, Washington, DC (February 1975)
Hohorst, J.K. (ed.): SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Karim, S.: PhD Thesis, MEI Moscow (1976)
Karow, H.U.: Thermodynamic state, specific heat and enthalpy function of saturated UO2 vapor between 3000K and 5000K. Kernforschungszentrum Karlsruhe, KfK 2390 (February 1977)
Kim, et al.: Measurements of thermal diffusivity of molten UO2. In: Proceedings of the 7th Symposium on Thermophysical Properties at the National Bureau of Standards, Gaithersberg, MD, CONF 770537-3, May 12, pp. 338–343 (1977)
Kolev, N.I.: Multiphase Flow Dynamics. Fundamentals, vol. 1. Springer, Berlin (2007)
Kusnezov, V.D., Katkovskii, E.A.: Teplovoj I gidravlicheskij raschet na EVM reaktorov s vodoj pod davleniem. MEI Moscow (1975)
Leibowitz, L., et al.: Properties for LMFBR safety analysis, ANL-CEN-RSD-76-1 (April 1976)
Lyon, W.F., Baily, W.E.: The solid-liquid diagram of the UO2-PO2 system. J. Nucl. Mater. 22, 332 (1976)
Malang, S.: Simulation of nuclear fuel rods by using process-computer controlled power for indirect electrically heated rods, Oak Ridge National Laboratory, ORNL-TM-4712, GEMP-482 (1975)
Marao, A., Kalitka, T., Kalitka, A., Uspuras, E.: Adaptation of the FEMAXI-6 code and RBMK fuel rods model testing employing the best estimate approach. Kerntechnik 75(3), 72–80 (2010)
Redlich, O., Kwong, J.N.S.: On the thermodynamics of solutions. V, An equation of state. Fugacities of gaseous solutions. Chem. Rev. 44, 233–244 (1949)
Reymann, G.A.: Specific heat capacity and enthalpy. In: Hohorst, J.K. (ed.) SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Riedel, L.: Eine neue universelle Dampfdruckformel. Chem.-Ing. Tech. 26, 83–89 (1954)
Cordfunke, E.H.P., Konings, R.J.M.: Thermochemical Data for Reactor Materials and Fussion Products. North-Holland, Amsterdam (1990)
Chu, C.C., Sieniki, J.J., Beker Jr., L.: Uncertainty analysis for thermophysical properties used in in-vessel retention analysis. In: Teofanous, T.G., et al. (eds.) In-Vessel Coolability and Retention of a Core Melt, DOE/ID-10460, vol. 1, U.S. Department of Energy Report (October 1996)
Gilchrist, K.E.: Thermal property measurements on Zirkaloy-2 and associated oxide layers. J. Nucl. Mater. 62, 257–264 (1976)
Hagrman, D.L.: In: Hohorst, J.K. (ed.) SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Hammer, R.R.: Zircaloy-4, uranium dioxide and materials formed by their interaction, A literature review with extrapolation of physical properties to high temperatures, IN-1093 (September 1967)
Hohorst, J.K. (ed.): SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Brandes, E.A. (ed.): Smithels metals reference book, 6th edn. Butterworth and Co., London (1983)
Cao, G., et al.: In situ measurements of spectral emissivity of materials for very high temperature reactors. Nuclear Technology 175, 460–467 (2011)
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn. part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9, American Chemical Society (1998)
Chawla, T.C., et al.: Thermophysical properties of mixed oxide fuel and stainless steel type 316 for use in transition phase analysis. Nuclear Engineering and Design 67, 57–74 (1981)
Chu, C.C., Sieniki, J.J., Beker Jr., L.: Uncertainty analysis for thermophysical properties used in in-vessel retention analysis. In: Teofanous, T.G., et al. (eds.) In-Vessel Coolability and Retention of a Core Melt, DOE/ID-10460, vol. 1. U.S. Department of Energy Report (October 1996)
Fischer, E.A.: A new evaluation of the urania equation of state based on recent vapor pressure. Nucl. Sci. Eng. 101, 97–116 (1989)
Fischer, E.A.: Fuel evaluation of state data for use in fast reactor accident analysis codes, KfK 4889, Kernforschungszentrum Karlsruhe (May 1992)
Fortov, V.E., Dremin, A.N., Leont’ev, A.A.: Evaluation of the parameters of the critical point. High Temp. 13, 984–992 (1975)
Fraser, M.E., Lu, W.K., Hamielec, A.E., Murarka, R.: Surface tension measurements on pure liquid iron and nickel by an oscillating drop technique. Metallurgical and Materials Transactions B 2(3), 817–823 (1971)
Hohorst, J.K. (ed.): SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, ECG-2555, vol. 4 (1990)
Kolev, N.I.: Multiphase Flow Dynamics, Fundamentals, vol. 1. Springer, Berlin (2007)
Kurz, W., Lux, B.: The sound velocity of iron and iron alloys in solid and fluid states. High Temp. – High Pressure 1, 387–399 (1969) (in German)
Leibowitz, L., et al.: Properties for LMFBR safety analysis, ANL-CEN-RSD-76-1 (April 1976)
Ostensen, R.W., Murphy, W.F., Wrona, B.J., Dietrich, L.W., Florek, J.C.: Intrusion of molten steel into cracks in solid fuel in transient-undercooling accident in liquid-metal fast breeder reactor. Nucl. Technol. 36, 200–214 (1977)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Redlich, O., Kwong, J.N.S.: On the thermodynamics of solutions. V, An equation of state. Fugacities of gaseous solutions. Chem. Rev. 44, 233–244 (1949)
Richter, F.: Die wichtigsten physikalischen Eigenschaften von 52 Eisenwerkstoffen Stahleisen-Sonderberischte Heft 8. Verlag Stahleisen M.B.H.-Düsseldorf (1983)
Teofanous, T.G., et al.: In-vessel coolability and retention of a core melt, DOE/ID-10460, vol. 1. U.S. Department of Energy Report (October 1996)
VDI-Wärmeatlas: Berechnungsblätter für den Wärmeübergang, 6th Aufl. VDI-Verlag, Düsseldorf (1991)
Bonnell, D.W.: Property measurements at high temp., levitation calorimetry studies of liquid metals. Ph.D. Thesis Rice University, Houston, TX (1972)
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn., part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9, American Chemical Society (1998)
Cordfunke, E.H.P., Konings, R.J.M.: Thermochemical Data for Reactor Materials and Fussion Products. North-Holland, Amsterdam (1990)
Fink, J.K., Leibowitz, L.: Thermal conductivity of zirconium. J. Nucl. Mater. 226, 44–50 (1995)
Hohorst, J.K. (ed.): SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, EGG-2555, vol. 4 (1990)
Kelly, J.E., Kao, S.P., Kazimi, M.S.: THERMIT-2: A two fluid model for light water reactor subchannel transient analysis. MIT Energy Laboratory Electric Utility Program, Report No. MIT-EL.81-014 (April 1981)
Kolev, N.I.: Multiphase Flow Dynamics, Fundamentals, vol. 1. Springer, Berlin (2007)
Krishnan, S., Weber, J.K.R., Anderson, C.D., Nordine, P.C.: Spectral emissivity and optical properties at l=632.8 nm for liquid uranium and zirconium at high temperature. J. Nucl. Mater. 203, 112–121 (1993)
Marao, A., Kalitka, T., Kalitka, A., Uspuras, E.: Adaptation of the FEMAXI-6 code and RBMK fuel rods model testing employing the best estimate approach. Kerntechnik 75(3), 72–80 (2010)
Rassohin, N.T., Gradusov, G.H., Gorbatych, V.P.: Korosija splava zirkonija – 1% niobija v uslovijah teploperedaci. Trudy MEI, Vyp. 83 (1971)
TAPP, A Database of Thermo-Chemical and Physical Properties. ES Microware, Hamilton, Ohio (1994)
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn., part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9, American Chemical Society (1998)
Hohorst, J.K.: SCDAP/RELAP5/M002 Code Manual. MATPRO – A library of material properties for light-water-reactor accident analysis, NUREG/CR-5273, ECG-2555, vol. 4 (1990)
Kammer, C.: Aluminium-Taschenbuch, 15th Aufl. Aluminium-Verlag, Düsseldorf (1995)
Kolev, N.I.: Multiphase Flow Dynamics, Fundamentals, vol. 1. Springer, Berlin (2007)
Touloukian, Y.S., DeWitt, D.P.: Thermo-Physical Properties of Matter. Plenum Press, New York (1972)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn. McGraw-Hill, New York (1985)
Barin, I., Knacke, O.: Thermo-Chemical Properties of Inorganic Substances. Springer, Heidelberg (1973)
Bates, J.L., McNeilly, C.E., Rasmussen, J.J.: Properties of Molten Ceramics. Batelle Memorial Institute, Richland, Washington BNWL-SA-3529 (1971)
Biomquist, R.A., Fink, J.K., Leibowitz, L.: Viscosity of molten alumina. Ceram. Bull. 5, 522 (1978)
Ceramic Nist (2007), http://www.ceramics.nist.gov/srd/summary/scdaos.htm
Elyutin, V.P., Mitin, B.C., Nagibin, Y.A.: Properties of liquid aluminum oxide. Fiz. Aerodispersnykh Syst. 7, 104–109 (1972)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007)
Kuhn, D., Moschke, M., Werle, H.: Freezing of aluminum oxide and iron flowing upward in circular quartz glass tubes, KfK 3592 (October 1983)
McCahan, S., Shepherd, J.E.: A thermodynamic model for aluminum-water interaction. In: Proceedings of the CSNI Specialists Meeting on Fuel-Coolant Interaction, Santa Barbara, California, NUREC/CP-0127 (January 1993)
Peppler, W., Menzenhauer, P., Will, H.: Simulated fuel melt movement and relocation intwo seven-pin-bundle geometries, KfK 3591 (July 1983)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Samsonov, G.V. (ed.): The Oxide Handbook. IFI/PLENUM, New York (1973)
Samsonov, G.V. (ed.): The Oxide Handbook, 2nd edn. IFI/PLENUM, New York (1982)
Shpil’rain, E.E., Yakimovich, K.A., Tsitsarkin, A.F.: Experimental study of the density of liquid alumina up to 2750°C. High Temp. – High Pressures 5, 191–198 (1973)
Touloukian, Y.S. (ed.): Recommended values of the thermo-physical properties of eight alloys, major constituents and their oxides thermo-physical properties research center, Purdue University, Lafayette, Indiana (February 1966)
Touloukian, Y.S., Buyco, E.H.: Thermo-Physical Properties of Matter, Specific Heat/Nonmetallic Solids. DATA TABLE NO. 62-A, vol. 5. IFI/PLENUM, New York (1970)
Touloukian, Y.S., Powell, R.W., Ho, C.Y., Klemens, P.G.: Thermo-Physical Properties of Matter, Thermal Conductivity/Nonmetallic Solids. DATA TABLE no 32, vol. 2. IFI/PLENUM, New York (1970)
Turnay, K.: Thermophysicalische Eigenschaften des Aluminiumoxides und Quarzglases, Research Center Karlsruhe (Mai 1985)
Urbain, G.: Viscosite de 1’alumine liquide. Rev. Int. Hautes Temper. Refract 19, 55–57 (1982)
Bityukov, V.K., Petrov, V.A.: Optical quartz glass as a reference substance for the thermal conductivity coefficient of partially transparent materials. High Temperature 38(2), 293–299 (2000)
Bityukov, V.K., Petrov, V.A., Stepanov, S.V.: Determination of the coefficient of thermal conductivity of silica glass by the contactless flat-plate method at 950-1500K. High Temp. 21(6), 840 (1984); Teplofiz. Vys. Temp. 21(6), 1099 (1983)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007a)
Krzhizhanovskii, R.E., Shtern, Z.Y.: Thermo-physical properties of nonmetallic materials, Energija, Leningrad (1973)
Men’, A.A., Chechel’nitskii, A.Z.: Teplofis. Vys. Temp. 11(6), 1309 (1973)
Memsnet (2007), http://www.memsnet.org/material/silicondioxidesio2film/
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn. McGraw-Hill, New York (1985)
Samsonov, G.V. (ed.): The Oxide Handbook, 2nd edn. IFI/PLENUM, New York (1982)
Touloukian, Y.S. (ed.): Recommended values of the thermo-physical properties of eight alloys, major constituents and their oxides thermo-physical properties research center, Purdue University, Lafayette, Indiana (February 1966)
Touloukian, Y.S., Buyco, E.H.: Thermo-Physical Properties of Matter. Specific Heat/Nonmetallic Solids. DATA TABLE NO. 62-A, vol. 5. IFI/PLENUM, New York (1970)
Touloukian, Y.S., Powell, R.W., Ho, C.Y., Klemens, P.G.: Thermo-Physical Properties of Matter, Thermal Conductivity/Nonmetallic Solids. DATA TABLE no 32, vol. 2 IFI/PLENUM, New York (1970)
Touloukian, Y.S., Ho, C.Y. (eds.): Thermo-physical properties of selected aerospace materials, Part I, Thermo-physical and Electronic Properties Information Center, CINDAS – Purdue University (1976)
Turnay, K.: Thermophysicalische Eigenschaften des Aluminiumoxides und Quarzglases, Research Center Karlsruhe (Mai 1985)
Barin, I., Knacke, O.: Thermochemical Properties of Inorganic Substances. Springer, New York (1973)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007a)
Lide, D.R., Frederikse, H.P.R. (eds.): CRC Handbook of Chemistry and Physics, 78th edn. CRC Press, New York (1997)
Massalski, T.B. (ed.): Binary Alloy Phase Diagrams ASM International, 2nd edn. ASM International, Materials Park, Ohio (1992)
MATPRO, SCDAP/RELAP5/MOD2 Code Manual. MATPRO – A Library of Materials Properties for Light- Water-Reactor Accident Analysis, NUREG/CR-5273, vol. 4 (1990)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Powers, D.A., Brockmann, J.E., Shiver, A.W.: VANESA: A mechanistic model of radionuclide release and aerosol generation during core debris interactions with concrete, NUREG/CR-4308 (July 1986)
Reimann, M., Stiefel, S.: The WECHSL-Mod2 Code: A computer program for the interaction of a core melt with concrete including the long term behavior – Model Description and User’s Manual, KfK 4477 (June 1989)
Touloukian, Y.S., Powell, R.W., Ho, C.Y., Klemens, P.G.: Thermophysical Properties of Matter. Thermal Conductivity – Nonmetallic Solids, vol. 2. IFI/PLENUM, New York (1970)
Touloukian, Y.S., DeWitt, D.P.: Thermophysical Properties of Matter. Plenum Press, New York (1972)
Touloukian, Y.S., Kirby, R.K., Taylor, R.E., Lee, T.Y.R.: Thermophysical Properties of Matter. Thermal Expansion – Nonmetallic Solids, vol. 13. IFI/PLENUM, New York (1977)
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn., part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9, American Chemical Society (1998)
Cordfunke, E.H.P., Konings, R.J.M.: Thermochemical Data for Reactor Materials and Fussion Products. North-Holland, Amsterdam (1990)
Elyutin, V.P., Kostikov, V.I., Pen’kov, I.A.: Effect of carbon on the surface tension and density of liquid vanadium, niobium, and molybdenum. Poroshovaya Metallurgya 93(9), 46–51 (1970)
Kolev, N.I.: Multiphase Flow Dynamics, Fundamentals, vol. 1. Springer, Berlin (2007)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Touloukian, Y.S., Powell, R.W., Ho, C.Y., Klemens, P.G.: Thermophysical Properties of Matter. Thermal Conductivity – Metallic Elements and Alloys, vol. 1. IFI/PLENUM, New York (1970)
Touloukian, Y.S., DeWitt, D.P.: Thermo-Physical Properties of Matter. Plenum Press, New York (1972)
Aesar, A.: Bestellkatalog Forschungschemikalien. Metalle and Materialien 1999–2000 (1999)
Cordfunke, E.H.P., Konings, R.J.M.: Thermochemical Data for Reactor Materials and Fussion Products. North-Holland, Amsterdam (1990)
Cox, J.D., Wagman, D.D., Medvedev, V.A.: CODATA Key Values for Thermodynamics. Hemisphere Publ. Corp., New York (1989)
Glushko, V.P., Gurvich, L.V., Bergman, G.A., Veyts, I.V., Medvedev, V.A., Kachkuruzov, G.A., Yungman, V.S.: Termodinamicheskie Svoistva Individual’nykh. Tom III. Nauka, Moskva (1981)
Kelly, K.K.: J. Am. Chem. Soc. 63, 1137 (1941)
Kerr, E.C., Hersh, N., Johnston, H.L.: J. Am. Chem. Soc. 72, 4738 (1950)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007)
Kracek, F.C., Morey, G.W., Merwin, H.E.: Am. J. Sci. 35, 143 (1938)
Kruh, R., Stern, K.H.: The effect of solutes on the properties and structure of liquid boric oxide. J. Am. Chem. Soc. 78, 278–281 (1956)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Schmidt, N.E.: Zh. Neorg. Khim. 11, 441 (1966); Russ. J. Inorg. Chem. 11, 241
Touloukian, Y.S., Powell, R.W., Ho, C.Y., Klemens, P.G.: Thermophysical Properties of Matter. Thermal Conductivity – Nonmetallic Solids, vol. 2. IFI/PLENUM, New York (1970)
Bottomley, P.D., Coquerelle: Metallurgical examination of bore samples from the three mile island unit 2 reactor core. Nuclear Technology 87, 120–136 (1989)
Chong, J.S., Chrisiansen, E.B., Baer, A.D.: Rheology of concentrated suspensions. J. Appl. Polym. 15, 2007–2021 (1971)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Thermodynamic properties of uranium dioxide, ANL-CEN-RSD-80-3 (April 1981a)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Thermo-physical properties of uranium dioxide. J. of Nuclear Materials 102, 17–25 (1981b)
Hayward, P.J., George, I.M.: Dissolution of UO2 in Zirkaloy-4 Part-4: Phase evolution during dissolution and cooling of, to 2500°C specimen (ZrO0.54-UO2), vol. 232 pp. 13–22 (1966)
Hodge, S.A., Ott, L.J.: Interpretation of the XR2-1 experiment and characteristics of the BWR lower plenum debris bed. In: Proc. of the Int. Top. Meeting on Advanced Reactor Safety, Orlando, Florida, June 1-5, vol. 1 (1997)
Juenke, E.F., Whitte, J.F.: Zr-UO2, Report GEMP-731 (1969)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007a)
Moshev, V.V., Ivanov, V.A.: Rheological behavior of concentrated non-newtonian suspensions. Nauka, Moskva (1990)
Politis, C.: Untersuchungen im Dreistoffsystem Uran-Zirkon-Sauerstoff, ZrO0.51-UO2, Kernforschungszentrum Karlsruhe, KfK Report 2167 (October 1975)
Ramacciotti, M., Journeau, C., Sudreau, F., Cognet, G.: Viscosity models for corium melts. In: Ninth Int. Top. Meeting on Nuclear Thermal Hydraulics (NURETH-9), San Francisco, October 3-8 (1999)
Romberger, K.A., Baes Jr., C.F., Stone, H.H.: Phase equilibrium studies in the UO2-ZrO2 system. J. Inorg. Nucl. Chem. 29, 1619–1630 (1967)
Skokan, A.: High temperature phase relations in the U-Zr-O system, ZrO0.43-UO2. In: 5th Int. Meeting on Thermal Nuclear Reactor Safety, Karlsruhe, September 9-13, pp. 1035–1042 (1984)
Spindler, B., Vateau, J.M.: The simulation of melt spreading with THEMA code Part: 1 Model, assessment strategy and assessment against analytical and numerical solutions. Nuclear Engineering and Design 236, 415–424 (2006a)
Spindler, B., Vateau, J.M.: The simulation of melt spreading with THEMA code Part: 2 Assessment against spreading experiments. Nuclear Engineering and Design 236, 425–441 (2006b)
Tim, K.T., Olander, D.R.: Dissolution of uranium dioxide by molten zitcaloy. Journal of Nuclear Materials 154, 85–101 (1988)
Borishanskij, V.M., Kutateladze, S.S., Novikov, I.I., Fedynskij, O.S.: Jidkometaliceskie teplonositeli (Liquid metal coolants), Atomisdat (1976)
Brandhurst, D.H., Buchanan, A.S.: Surface properties of liquid sodium and sodium-potassium alloy in contact with metal oxide surfaces. Aust. J. Chem. 14(3), 397–408 (1961)
Bystrov, P.I., Kagan, D.N., Krechetova, G.A., Shpilrain, E.E.: Zhidkometallicheskie teplonositeli dlya teplovyh trub i energeticheskih ustanovok (Liquid Metal Heat-Carriers for Heat Pipes and Power Facilities). Nauka Press, Moscow (1988)
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn., part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9 (1998)
Cordfunke, E.H.P., Konings, R.J.M. (eds.): Thermochemical Data for Reactor Materials and Fusion Products. Nord Holland, Amsterdam (1990)
Dwyer, O.E.: Boiling Liquid Metal Heat Transfer. American Nuclear Society, Hinsdale (1976)
Ewing, C.T., Stone, J.P., Spann, J.R., Steinkuller, E.W., Williams, D.D., Miller, R.R.: High-Temperature Properties of Potassium, NRL-6233. Naval Research Laboratory, Washington, DC (September 1965)
Ewing, C.T., Stone, J.P., Spann, J.R., Miller, R.R.: Molecular association in Sodium, Potassium and Cesium vapors at high temperature. J. Phys. Chem. 71(3), 473–477 (1967)
Fink, J.K., Chasanov, M.G., Leibowitz, L.: Properties for Safety Analysis, ANL-CEN-RSD-82-2 (1982)
Golden, G.H., Tokar, J.V.: Thermophysical Properties of Sodium. ANL-7323. Argonne National Laboratory, Argonne (1967)
Gurvich, L.V., Yorish, V.S., Khandamirova, N.E., Yungman, V.S.: Ideal gaseous state. In: Ohse, R.W. (ed.) Handbook of Thermodynamic and Transport Properties of Alkali Metals. Blackwell Scientific Publishing, Oxford (1985)
Hame, W.: Aufbereitung der Stoffunktionen für Natrium; Einsatz in COMIX-Referenzversion KfK auf M7890 und Vektorrechner, PTF report delivered to KfK (December 1986)
Ivanovskij, M.N., Sorokin, V.P.: Subbotin VI Isparenie I kondensazija metalov. Atomizdat, Moskva (1976)
Kolev, N.I.: Multiphase flow dynamics, vol. 1. Springer, Berlin (2007a)
Kiriyanenko, A.A., Makarova, O.P., Romanov, V.D., Solov’ev, A.N.: Experimental investigation of the surface tension of liquid sodium. J. Appl. Mech. Tech. Phys. 59(4), 121–122 (1965)
Makansi, M., Selke, W.A., Bonilla, C.F.: Thermodynamic properties of sodium. J. Chem. Eng. Data 5(4), 441–452 (1960)
Miller, D., Cohen, A.B., Dickerman, C.E.: Estimation of vapor and liquid density and heat of vaporization of alkali metal to the critical point. In: International Conference of Safety of Fast Breeder Reactors, Aix-en Provence, France (September 1967)
Mozgovoi, A.G., Roshchupkin, V.V., Pokrasin, M.A., Fokin, L.R., Handomirova, N.E.: Lithium, sodium, potassium, rubidium, cesium. Saturation Vapor Pressure at High Temperature. GSSSD 112-87. Standards Press, Moscow (1988)
Novikov, I.I., Roshchupkin, V.V., Trelin, Y.S., Tsiganova, T.A., Mozgovoi, A.G.: Review series an thermophysical properties of substances, no. 6(32), p. 65. Institute of Hi, Temperatures Acad. Sci. USSR, Moscow (1981)
Padilla Jr., A.: High-Temperature Thermodynamic Properties of Sodium, HEDL-TME 77-27. Hanford Engineering Development Laboratory, Richland (1978)
Perry, R.H., Green, D.: Perry’s Chemical Engineer’s Handbook, 6th edn., pp. 3–285. McGraw-Hill, New York (1985)
Petiot, F., Seiler, J.-M.: Physical properties of sodium. A contribution to the estimation of the critical coordinates. In: 10th Liquid Metal Boiling Working Group, Katlsruhe (October 1982)
Shpilrain, E.E., Yakimovich, K.A., Fomin, V.A., Skovorod’ko, S.N., Mozgovoi, A.G.: Handbook of Thermodynamic and Transport Properties of Alkali Metals, p. 753. Blackwell Scientific Publications, Oxford (1994)
Stone, J.P., Ewing, C.T., Spann, J.R., Steinkuller, E.W., Williams, D.D., Miller, R.R.: High-Temperature Properties of Sodium. NRL-6241, Naval Research Laboratory, Washington, DC (1965)
Stone, J.P., Ewing, C.T., Spann, J.R., Steinkuller, E.W., Williams, D.D., Miller, R.R.: High-temperature properties of sodium. J. Chem. Eng. Data 11, 309 (1966)
Thormeier, K.: Solubility of noble gases in liquid sodium. Nucl. Eng. Design 14, 69 (1970)
Trelin, J.S., Vasiljev, I.I., Rostchupkin, B.B.: Atomaja Energia 9(5), 410 (1960)
Vargaftic, N.B., Vonogradov, Y.K., Yargin, V.S.: Handbook of Physical Properties of Liquids and Gases, 3rd Augmented and revised edition. Begel House, New York (1996)
Vargaftic, N.B., Voljak, L.D.: Thermodynamic properties of alkali metal vapors at low pressures. In: Ohse, R.W. (ed.) Handbook of Thermodynamic and Transport Properties of Alkali Metals, Blackwell Scientific Publishing, Oxford (1985)
Veleckis, E., Dhar, S.K., Cafasso, F.R., Feder, H.M.: Solubility of helium and argon in liquid sodium. J. Phys. Chem. 75(18), 2832–2838 (1971)
Wikipedia (2007), http://en.wikipedia.org/wiki/Sodium
Chase Jr., M.W.: NIST-JANAF Thermochemical Tables, 4th edn., part II, Cr-Zr. J. Phys. Chem. reference data, Monograph No. 9 (1998)
Lead-Bismuth Handbook, Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics and Technology. Nuclear Energy Agency, NEA No. 6195 (2007) ISBN 978-92-64-99002-9
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Kolev, N.I. (2015). Thermo-Physical Properties for Severe Accident Analysis. In: Multiphase Flow Dynamics 5. Springer, Cham. https://doi.org/10.1007/978-3-319-15156-4_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-15156-4_17
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-15155-7
Online ISBN: 978-3-319-15156-4
eBook Packages: EngineeringEngineering (R0)