Abstract
Fundamentals of metal matrix composites are overviewed. The various light metal matrix systems (particularly Al and Mg) and the different types of reinforcements used are mentioned. The various composite production methods are described. Strengthening mechanisms that define the enhancement in properties of composites are discussed. The microstructural and mechanical properties of the composites are summarized. In addition, the several disadvantages encountered in MMCs due to ceramic reinforcement addition are understood from interfacial characteristic/properties.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abbasipour B, Niroumand B, Monir Vaghefi SM (2010) Compocasting of A356-CNT composite. Trans Nonferrous Met Soc China 20:1561–1566. doi:10.1016/S1003-6326(09)60339-3
Abramov O (1994) Ultrasound in liquid and solid metals. CRC Press, Boca Raton
Ahmed A, Neely AJ, Shankar K et al (2010) Synthesis, tensile testing, and microstructural characterization of nanometric SiC particulate-reinforced Al 7075 matrix composites. Metall Mater Trans A 41:1582–1591. doi:10.1007/s11661-010-0201-y
Arsenault R (1983) Particulate mcirostructure of fiber and SiC in 6061 Al composites. Scr Metall 17:67–71
Balog M, Yu P, Qian M et al (2013) Nanoscaled Al–AlN composites consolidated by equal channel angular pressing (ECAP) of partially in situ nitrided Al powder. Mater Sci Eng A 562:190–195
Bathula S, Anandani RC, Dhar A, Srivastava K (2012) Microstructural features and mechanical properties of Al 5083/SiCp metal matrix nanocomposites produced by high energy ball milling and spark plasma sintering. Mater Sci Eng A 545:97–102. doi:10.1016/j.msea.2012.02.095
Brown L, Stobbs W (2006) The work-hardening of copper-silica v. equilibrium plastic relaxation by secondary dislocations. Philos Mag 34:351–372
Cao G, Konishi H, Li X (2008) Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)Al-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing. Mater Sci Eng A 486:357–362. doi:10.1016/j.msea.2007.09.054
Chawla N, Chawla K (2006) Metal matrix composites. Springer, New York
Chawla K, Metzger M (1978) Advances in research on strength and fracture of materials, vol 3. Pergamon Press, New York, p 1039
Chen SH, Jin PP, Schumacher G, Wanderka N (2010) Microstructure and interface characterization of a cast Mg2B2O5 whisker reinforced AZ91D magnesium alloy composite. Compos Sci Technol 70:123–129. doi:10.1016/j.compscitech.2009.09.015
Contreras A (2004) Mg/TiC composites manufactured by pressureless melt infiltration. Scr Mater 51:249–253. doi:10.1016/j.scriptamat.2004.04.007
Daoud A, Reif W (2002) Influence of Al2O3 particulate on the aging response of A356 Al-based composites. J Mater Process Technol 123:313–318. doi:10.1016/S0924-0136(02)00103-6
Das A, Chatterjee S (1981) Squeeze casting of an aluminium alloy containing small amounts of SiC whiskers. Metall Mater Technol 137
Delanney F, Frozen L, Peryttere A (1987) Review—the wetting of solids by molten metals and its relation to the preparation of metal-matrix composites. J Mater Sci 22:1
Dieter GE (1988) Mechanical metallurgy. McGraw-Hill Higher Education, London
Donthamsetty S, Damera NR, Jain PK (2009) Ultrasonic cavitation assisted fabrication and characterization of A356 metal matrix nanocomposite reinforced with Sic, B4C, CNTs. Asian Int J Sci Technol Prod Manuf Eng 2:27–34
Ellis M (1996) Joining of aluminium based metal matrix composites. Int Mater Rev 41:41–58
Erman A, Groza J, Li X et al (2012) Nanoparticle effects in cast Mg-1 wt% SiC nano-composites. Mater Sci Eng A 558:39–43. doi:10.1016/j.msea.2012.07.048
Esawi MK, Morsi K, Sayed A et al (2010) Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol 70:2237–2241. doi:10.1016/j.compscitech.2010.05.004
Evans R, Boyd J (2003) Near-interface microstructure in a SiC/Al composite. Scr Mater 49:59–63. doi:10.1016/S1359-6462(03)00180-5
Evans A, Marchi CS, Mortensen A (2003) Metal matrix composites in industry: an introduction and a survey, vol 1. Springer, New York
Ezatpour HR, Sajjadi SA, Sabzevar MH et al (2014) Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting. Mater Des 55:921–928
Fecht H (1995) Nanostructure formation by mechanical attrition. Nanostruct Mater 6:33–42
Fridlyander J (1994) Metal matrix composites. Springer, New York
Friedrich HE, Mordike BL (2006) Magnesium technology: metallurgy, design data, automotive applications. Springer, Berlin
Garcia-Hinojosa JA, Gonzalez CR, Juarez JAI, Surrapa MK (2004) Effect of grain refinement treatment on the microstructure of cast Al–7Si–SiCp composites. Mater Sci Eng A 386:54–60. doi:10.1016/j.msea.2004.07.020
Ghomashchi M, Vikhrov A (2000) Squeeze casting: an overview. J Mater Process Technol 101:1–9
Girot FA, Quenisset JM, Naslain R (1987) Discontinuously reinforced Al metal matrix composites. Compos Sci Technol 30:155–184
Goh CS, Wei J, Lee LC, Gupta M (2006) Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes. Mater Sci Eng A 423:153–156. doi:10.1016/j.msea.2005.10.071
Goh CS, Wei J, Lee LC, Gupta M (2008) Ductility improvement and fatigue studies in Mg-CNT nanocomposites. Compos Sci Technol 68:1432–1439. doi:10.1016/j.compscitech.2007.10.057
Gu J, Zhang X, Gu M (2004) Mechanical properties and damping capacity of (SiCp+Al2O3·SiO2f)/Mg hybrid metal matrix composite. J Alloys Compd 385:104–108. doi:10.1016/j.jallcom.2004.04.106
Gu X, Zhou W, Zheng Y et al (2010) Microstructure, mechanical property, bio-corrosion and cytotoxicity evaluations of Mg/HA composites. Mater Sci Eng C 30:827–832. doi:10.1016/j.msec.2010.03.016
Gupta M, Eugene WWL (2007) Microwaves and metals. Wiley, Hoboken
Gupta M, Sharon NML (2011) Magnesium, magnesium alloys, and magnesium composites. Wiley, Hoboken
Harris SJ (1988) Cast metal matrix composites. Mater Sci Technol 4:231
Hassan SF, Gupta M (2005) Enhancing physical and mechanical properties of Mg using nanosized Al2O3 particulates as reinforcement. Metall Mater Trans A 36:2253–2258
Heinrich M, Gonasagren G (2012) Semi-solid processing of alloys and composites XII. Trans Tech Publication, Durnten-Zurich
Hong C, Kim J (2006) Development of an advanced rheocasting process and its application. In: Proceeding of the ninth international conference on the processing of semi-solid alloys and composite, Busan, Korea, pp 44–53
Hossein-Zadeh M, Mirzaee O, Saidi P (2014) Structural and mechanical characterization of Al-based composite reinforced with heat treated Al2O3 particles. Mater Des 54:245–250. doi:10.1016/j.matdes.2013.08.036
Hu L, Wang E (2000) Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting. Mater Sci Eng A 278:267–271. doi:10.1016/S0921-5093(99)00608-5
Hu B, Peng L, Powell BR et al (2010) Interfacial and fracture behavior of short-fibers reinforced AE44 based magnesium matrix composites. J Alloys Compd 504:527–534. doi:10.1016/j.jallcom.2010.05.155
Jayalakshmi S, Kailas SV, Seshan S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its Al2O3 fibre reinforced composites. Compos Part A Appl Sci Manuf 33:1135–1140
Jayalakshmi S, Kailas SV, Seshan S, Fleury E (2006) Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites. J Mater Sci 41:3743–3752. doi:10.1007/s10853-005-4484-0
Jayaramanavar P, Paramsothy M, Balaji A, Gupta M (2009) Tailoring the tensile/compressive response of magnesium alloy ZK60A using Al2O3 nanoparticles. J Mater Sci 45:1170–1178. doi:10.1007/s10853-009-4059-6
Kamali Ardakani MR, Khorsand S, Amirkhanlou S, Javad Nayyeri M (2014) Application of compocasting and cross accumulative roll bonding processes for manufacturing high-strength, highly uniform and ultra-fine structured Al/SiCp nanocomposite. Mater Sci Eng A 592:121–127
Kandemir S, Yalamanchili A, Atkinson H (2012) Production of aluminium matrix nanocomposite feedstock for thixoforming by an ultrasonic method. Key Eng Mater 504–506:339–344
Kaufmann H, Uggowitzer P (2001) Fundamentals of the new rheocasting process for magnesium alloys. Adv Eng Mater 3:963
Kennedy AR, Weston DP, Jones MI (2001) Reaction in Al–TiC metal matrix composites. Mater Sci Eng A 316:32–38. doi:10.1016/S0921-5093(01)01228-X
Kimura Y, Mishima Y, Umekawa S, Suzuki T (1984) Compatibility between carbon fibre and binary aluminium alloys. J Mater Sci 19:3107
Koli DK, Agnihotri G, Purohit R (2013) Properties and characterization of Al-Al2O3 composites processed by casting and powder metallurgy routes (review). Int J Latest Trends Eng Technol 2:486–496
Krishnan B, Surappa M, Rohatgi P (1981) The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites. J Mater Sci 16:1209
Lee KB, Sim HS, Cho SY, Kwon H (2001) Reaction products of Al–Mg/B4C composite fabricated by pressureless infiltration technique. Mater Sci Eng A 302:227–234. doi:10.1016/S0921-5093(00)01831-1
Lee KB, Sim HS, Heo SW et al (2002) Tensile properties and microstructures of Al composite reinforced with BN particles. Compos Part A Appl Sci Manuf 33:709–715. doi:10.1016/S1359-835X(02)00011-8
Lee C, Huang J, Hsieh P (2006) Mg based nano-composites fabricated by friction stir processing. Scr Mater 54:1415–1420. doi:10.1016/j.scriptamat.2005.11.056
Li Q, Rottmair C, Singer R (2010) CNT reinforced light metal composites produced by melt stirring and by high pressure die casting. Compos Sci Technol 70:2242–2247
Liao J, Tan M-J, Sridhar I (2010) Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites. Mater Des 31:S96–S100. doi:10.1016/j.matdes.2009.10.022
Lii D-F, Huang J-L, Chang S-T (2002) The mechanical properties of AlN/Al composites manufactured by squeeze casting. J Eur Ceram Soc 22:253–261. doi:10.1016/S0955-2219(01)00255-2
Lloyd DJ (1994) Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev 39:1–23. doi:10.1179/095066094790150982
Long A, Thornhill D, Armstrong A, Watson D (2012) Predicting die life from die temperature for high pressure dies casting aluminium alloy. Appl Therm Eng 44:100–107
Luo ZP, Song YG, Zhang SQ (2001) A TEM study of the microstructure of SiCp/Al composite prepared by pressureless infiltration method. Scr Mater 45:1183–1189
Manna A, Bhattacharayya B (2003) A study on machinability of Al/SiC-MMC. J Mater Process Technol 140:711–716
Maruyama B (1998) Progress and promise in aluminium metal matrix composites. AMPTIAC NewsLett 2(3)
Mazahery A, Shabani MO (2012) Mechanical properties of A356 matrix composites reinforced with nano-SiC particles. Strength Mater 44:686–692
Metcalfe AG (1974) Interfaces in metal matrix composites. In: Metcalfe AG (ed) Composite materials. Academic, New York
Miller W, Humphreys FJ (1991) Strengthening mechanisms in particulate metal matrix composites. Scr Metall Mater 25:33–38
Miracle D (2005) Metal matrix composites—from science to technological significance. Compos Sci Technol 65:2526–2540
Mortenson A, Flemmings JA, Cornie MC (1988) Solidification processing of metal matrix composites. J Appl Meteorol 40:12–19
Mula S, Padhi P, Panigrahi SC et al (2009) On structure and mechanical properties of ultrasonically cast Al–2% Al2O3 nanocomposite. Mater Res Bull 44:1154–1160. doi:10.1016/j.materresbull.2008.09.040
Naher S, Brabazon D, Looney L (2005) Development and assessment of a new quick quench stir caster design for the production of metal matrix composites. J Mater Process Technol 166:430–439
Nardone V, Prewo K (1986) On the strength of discontinuous silicon carbide reinforced aluminium composites. Scr Metall 20:43–48
Nguyen QB, Gupta M (2008) Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates. J Alloys Compd 459:244–250. doi:10.1016/j.jallcom.2007.05.038
Nguyen QB, Gupta M (2010) Enhancing mechanical response of AZ31B using Cu+nano-Al2O3 addition. Mater Sci Eng A 527:1411–1416. doi:10.1016/j.msea.2009.11.002
Nie KB, Wang XJ, Wu K et al (2011) Processing, microstructure and mechanical properties of magnesium matrix nanocomposites fabricated by semisolid stirring assisted ultrasonic vibration. J Alloys Compd 509:8664–8669. doi:10.1016/j.jallcom.2011.06.091
Noguchi T, Asano K, Hiratsuka S, Miyahara H (2008) Trends of composite casting technology and joining technology for castings in Japan. Int J Cast Met Res 21:219–225
Paramsothy M, Hassan SF, Srikanth N, Gupta M (2009) Enhancing tensile/compressive response of magnesium alloy AZ31 by integrating with Al2O3 nanoparticles. Mater Sci Eng A 527:162–168. doi:10.1016/j.msea.2009.07.054
Paramsothy M, Hassan SF, Srikanth N, Gupta M (2010) Simultaneous enhancement of tensile/compressive strength and ductility of magnesium alloy AZ31 using carbon nanotubes. J Nanosci Nanotechnol 10:956–964. doi:10.1166/jnn.2010.1809
Reed-Hill R (1973) Role of deformation twinning in determining the mechanical properties of metals: In: The inhomogeneity of plastic deformation. ASM International, Materials Park
Rohatgi PK, Asthana R, Das S (1986) Solidification, structures and properties of cast metal-ceramic particle composites. Int Met Rev 31:115
Saheb N, Iqbal Z, Khalil A et al (2012) Spark plasma sintering of metals and metal matrix nanocomposites: a review. J Nanomater 2012:1–13. doi:10.1155/2012/983470
Sairam K, Sonber J, Murthy T et al (2013) Influence of spark plasma sintering parameters on densification and mechanical properties of boron carbide. Int J Refract Met Hard Mater 42:185–192
Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579–583
Sajjadi S, Torabi Parizi M, Ezatpour H, Sedghi A (2012) Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties. J Alloys Compd 511:226–231
Sankaranarayanan S, Jayalakshmi S, Gupta M (2011) Effect of ball milling the hybrid reinforcements on the microstructure and mechanical properties of Mg–(Ti+n-Al2O3) composites. J Alloys Compd 509:7229–7237. doi:10.1016/j.jallcom.2011.04.083
Schultz BF, Ferguson JB, Rohatgi PK (2011) Microstructure and hardness of Al2O3 nanoparticle reinforced Al–Mg composites fabricated by reactive wetting and stir mixing. Mater Sci Eng A 530:87–97. doi:10.1016/j.msea.2011.09.042
Segal V (1999) Equal channel angular extrusion: from macromechanics to structure formation. Mater Sci Eng A 271:322–333
Shorowordi KM, Laoui T, Haseeb ASMA et al (2003) Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. J Mater Process Technol 142:738–743. doi:10.1016/S0924-0136(03)00815-X
Sklenicka V, Dvorak J, Svoboda M et al (2013) Equal-channel angular pressing and creep in ultrafine-grained aluminium and its alloys. In: Ahmad Z (ed) Aluminium alloys—new trends in fabrication and applications. InTech, Rijeka
Stacey MH (1988) Production and characterization of fibres for MMCs. Mater Sci Technol 4:227–230
Su H, Gao W, Feng Z, Lu Z (2012) Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites. Mater Des 36:590–596. doi:10.1016/j.matdes.2011.11.064
Sun K, Shi QY, Sun YJ, Chen GQ (2012) Microstructure and mechanical property of nano-SiCp reinforced high strength Mg bulk composites produced by friction stir processing. Mater Sci Eng A 547:32–37. doi:10.1016/j.msea.2012.03.071
Surappa M (2003) Aluminium matrix composites: challenges and opportunities. Sadhana 28:319
Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–184
Suryanarayana C (2011) Synthesis of nanocomposites by mechanical alloying. J Alloys Compd 509:S229–S234. doi:10.1016/j.jallcom.2010.09.063
Suryanarayana C, Al-Aqeeli N (2013) Mechanically alloyed nanocomposites. Prog Mater Sci 58:383–502. doi:10.1016/j.pmatsci.2012.10.001
Suslick KS, Didenko Y, Fang MM, Hyeon T, Kolbeck KJ, McNamara WB et al (1999) Acoustic cavitation and its chemical consequences. Philos Trans R Soc Lond A 357:335–353
Tee KL, Lu L, Lai MO (2000) Synthesis of in situ Al±TiB2 composites using stir cast route. Compos Struct 47:589–593
Tekmen C, Ozdemir I, Cocen U, Onel K (2003) The mechanical response of Al–Si–Mg/SiCp composite: influence of porosity. Mater Sci Eng A 360:365–371. doi:10.1016/S0921-5093(03)00461-1
Thakur SK, Balasubramanian K, Gupta M (2007a) Microwave synthesis and characterization of magnesium based composites containing nanosized SiC and hybrid (SiC+Al[sub 2]O[sub 3]) reinforcements. J Eng Mater Technol 129:194. doi:10.1115/1.2400279
Thakur SK, Kwee GT, Gupta M (2007b) Development and characterization of magnesium composites containing nano-sized silicon carbide and carbon nanotubes as hybrid reinforcements. J Mater Sci 42:10040–10046. doi:10.1007/s10853-007-2004-0
Thakur SK, Srivatsan TS, Gupta M (2007c) Synthesis and mechanical behavior of carbon nanotube–magnesium composites hybridized with nanoparticles of alumina. Mater Sci Eng A 466:32–37. doi:10.1016/j.msea.2007.02.122
Tjong S (2007) Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties. Adv Eng Mater 9:639–652
Tun KS, Gupta M (2009) Development of magnesium/(yttria+nickel) hybrid nanocomposites using hybrid microwave sintering: microstructure and tensile properties. J Alloys Compd 487:76–82. doi:10.1016/j.jallcom.2009.07.117
Tun KS, Jayaramanavar P, Nguyen QB et al (2012) Investigation into tensile and compressive responses of Mg-ZnO composites. Mater Sci Technol 28:582–588. doi:10.1179/1743284711Y.0000000108
Uozumi H, Kobayashi K, Nakanishi K et al (2008) Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting. Mater Sci Eng A 495:282–287
Vicens J, Chedru M, Chermant JL (2002) New Al–AlN composites fabricated by squeeze casting: interfacial phenomena. Compos Part A Appl Sci Manuf 33:1421–1423
Wang Y, Huang J (2003) Texture analysis in hexagonal materials. Mater Chem Phys 81:11–26. doi:10.1016/S0254-0584(03)00168-8
Wang SJ, Wu GQ, Li RH et al (2006) Microstructures and mechanical properties of 5 wt.% Al2Yp/Mg–Li composite. Mater Lett 60:1863–1865. doi:10.1016/j.matlet.2005.12.038
Wang L, Turnley P, Savage G (2011) Gas content in high pressure die castings. J Mater Process Technol 211:1510–1515
Wang XJ, Nie KB, Sa XJ et al (2012) Microstructure and mechanical properties of SiCp/MgZnCa composites fabricated by stir casting. Mater Sci Eng A 534:60–67. doi:10.1016/j.msea.2011.11.040
Witkin D, Lavernia E (2006) Synthesis and mechanical behavior of nanostructured materials via cryomilling. Prog Mater Sci 51:1–60
Xiong B, Xu Z, Yan Q et al (2011) Effects of SiC volume fraction and aluminum particulate size on interfacial reactions in SiC nanoparticulate reinforced aluminum matrix composites. J Alloys Compd 509:1187–1191. doi:10.1016/j.jallcom.2010.09.171
Yang Y, Lan J, Li X (2004) Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy. Mater Sci Eng A 380:378–383. doi:10.1016/j.msea.2004.03.073
Yasunori M, Hiroto T, Atsushi S (1996) Method and apparatus for shaping semisolid metals. EP0745694B1
Ye H, Liu X (2004) Review of recent studies in magnesium. J Mater Sci 9:6153–6171
Ye J, He J, Schoenung J (2005) Cryomilling for the fabrication of a particulate B4C reinforced Al nanocomposite: part I. Effects of process conditions on structure. Metall Mater Trans A 37(10):3099–3109
Zhang Z, Chen D (2006) Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scr Mater 54:1321–1326. doi:10.1016/j.scriptamat.2005.12.017
Zhang X, Zhang D, We R et al (1997) (SiCw+B4Cp)/ZK60A Mg alloy matrix composite. Scr Mater 37:1631–1635
Zhang Q, Chen G, Wu G et al (2003) Property characteristics of a AlNp/Al composite fabricated by squeeze casting technology. Mater Lett 57:1453–1458. doi:10.1016/S0167-577X(02)01006-6
Zhang Q, Ma X, Wu G (2013) Interfacial microstructure of SiCp/Al composite produced by the pressureless infiltration technique. Ceram Int 39:4893–4897. doi:10.1016/j.ceramint.2012.11.082
Zheng M, Wu K, Yao C (2001) Characterization of interfacial reaction in squeeze cast SiCw/Mg composite. Mater Lett 47:118–124
Zheng MY, Wu K, Liang M et al (2004) The effect of thermal exposure on the interface and mechanical properties of Al18B4O33w/AZ91 magnesium matrix composite. Mater Sci Eng A 372:66–74. doi:10.1016/j.msea.2003.09.085
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 S. Jayalakshmi and M. Gupta
About this chapter
Cite this chapter
Jayalakshmi, S., Gupta, M. (2015). Light Metal Matrix Composites. In: Metallic Amorphous Alloy Reinforcements in Light Metal Matrices. SpringerBriefs in Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-15016-1_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-15016-1_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-15015-4
Online ISBN: 978-3-319-15016-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)