Abstract
This chapter describes a method of engineering support of preoperative planning of surgical procedures with the use of engineering tools, such as state-of-the-art software for medical image processing, or a finite element method. The procedure of pre-operative planning consists in matching individual cases of incision sites and directions, visualization and selection of areas for resection as well as planning the technique of implant positioning and fixation. Also, the final visualization of the result of the planned medical procedure can be performed. This paper presents procedural propositions in surgery planning in the cases of corrections of the head shape in patients with craniosynostosis, corrections of the chest deformity such as pigeon chest and stabilization of the lumbar spine. 3D models created on the basis of computer tomography (CT) or magnetic resonance imaging (MRI) enabled it to conduct a biomechanical analysis as well as an objective quantitative and qualitative virtual evaluation of the surgical procedure. Preoperative planning support gives the physician an opportunity to prepare for the operation in a better way, which results in the selection of the best possible variant of an operative technique, reduction of time of the surgical procedure and minimization of the risk of intraoperative complications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Altobelli DE, Kikinis R, Mulliken JB, Cline H, Lorensen W, Jolesz F (1993) Computed-assisted three-dimensional planning in craniofacial surgery. Plast Reconstr Surg 92:576–585
Barone CM, Jimenez DF (2004) Endoscopic approach to coronal craniosynostosis. Clin Plast Surg 31:415–422
Baumer TG, Powell BJ, Fenton TW, Haut RC (2009) Age dependent mechanical properties of the infant porcine parietal bone and a correlation to the human. J Biomech Eng 131(11):111–116
Bruchin R, Stock UA, Drucker JP, Zhari T, Wippermann J, Albes JM, Himtze D, Eckardt S, Konke C, Wahlers T (2005) Numerical simulation techniques to study the structural response of the human chest following median sternotomy. Ann Thorac Surg 80:623–630
Cimerman M, Kristan A (2007) Preoperative planning in pelvic and acetabular surgery: the value of advanced computerized planning modules. Injury 38(4):442–449
Coats B, Margulies SS (2006) Material properties of human infant skull and suture at highrates. J Neurotrauma 23:1222–1232
Couper ZS, Albermani FG (2005) Biomechanics of shaken baby syndrome: physical testing and numerical modeling. In: Deeks Hao (eds) Developments in mechanics of structures and materials. Taylor Francis Group, London, pp 213–218
Cutting C, Bookstein Fl, Grayson B, Fellingham L, Mccarthy JG (1986) Three dimensional computer-assisted design of craniofacial surgical procedures: optimization and interaction with cephalometric and CT-basedmodels. Plast Reconstr Surg 77:877–885
Cutting C, Grayson B, Bookstein F, Fellingham L, Mccarthy JG (1986) Computer-aided planning and evaluation of facial and orthognathic surgery. Clin Plast Surg 13:449–462
Ehmer U, Joos U, Flieger S, Wiechmann D (2012) The University Münster model surgery system for Orthognathic surgery. Part I—the idea behind. Head Face Med 8:14
Furusu K, Watanabe I, Kato Ch, Miki K, Hasegawa J (2001) Fundamental study of side impast analysis using the finite element model of the human thorax. JSAE 22:195–199
Gzik M, Wolański W, Kawlewska E, Larysz D, Kawlewski K (2011) Modeling and simulation of trigonocephaly correction with use of finite elements method. Proceedings of the III ECCOMAS thematic conference on computational vision and medical image processing: VipIMAGE, Portugal, pp 47–50
Gras F, Marintschev I, Wilharm A, Klos K, Mückley T, Hofmann G (2010) O: 2D-fluoroscopic navigated percutaneous screw fixation of pelvic ring injuries—a case series. BMC Musculoskelet Disord 11:153
Gzik M, Wolański W, Tejszerska D, Gzik-Zroska B, Koźlak M, Larysz D (2009) Interdisciplinary researches supporting neurosurgical correction of children head deformation. Model Optim Phys Syst 8:49–54
Gzik-Zroska B, Wolański W, Gzik M (2013) Engineering-aided treatment of chest deformities to improve the process of breathing. Int J Numer Method Biomed Eng 29:926–937
Handels H, Ehrhardt J, Plötz W, Pöppl SJ (2001) Three-dimensional planning and simulation of hip operations and computer-assisted construction of endoprostheses in bone tumor surgery. Comput Aided Surg 6(2):65–76 (Wiley Online Library)
Handels H, Ehrhardt J, Plötz W, Pöppl SJ (2000) Virtual planning of hip operations and individual adaption of endoprostheses in orthopaedic surgery. Int J Med Inform 58–59:21–28
Hu Y, Malthaner RA (2007) The feasibility of three-dimensional displays of the thorax for preoperative planning in the surgical treatment of lung cancer. Eur J Cardiothorac Surg 31:506–511
Jiang X, You J, Wang N, Shen Z, Li J (2010) Skull mechanics study of PI procedure plan for craniosynostosis correction based on finite element method, Proceedings of 4th International Conference on Bioinformatics and Biomedical Engineering (iCBBE)
Jimenez DF, Barone CM, Cartwright CC et al (2002) Early management of craniosynostosis using endoscopic-assisted strip craniectomies and cranial orthotic molding therapy. Pediatrics 110:97–104
Larysz D, Wolański W, Gzik M, Kawlewska E (2011) Virtual planning of the surgical treatment of baby skull shape correction. Model Optim Phys Syst 10:49–52
Larysz D, Wolański W, Kawlewska E, Mandera M, Gzik M (2012) Biomechanical aspects of preoperative planning of skull correction in children with craniosynostosis. Acta Bioeng Biomech 14:19–26
Marchetti C, Bianchi A, Muyldermans L, Di Martino M, Lancellotti L, Sarti A (2011) Validation of new soft tissue software in orthognathic surgery planning. Int J Oral Maxillofac Surg 40:26–32
Nackenhorst U (1997) Numerical simulation of stress stimulated bone remodeling. Technische Mech 17(1):31–40
Raaijmaakers M, Gelaude F, de Smedt K, Clijmans T, Dille J, Mulier M (2010) A custom-made guide-wire positioning device for hip surface replacement arthroplasty: description and first results. BMC Musculoskelet Disord 11:161
Sacha E, Tejszerska D, Larysz D, Gzik M, Wolański W (2010) Computer method in craniosynostosis. Proceedings of 12th International Scientific Conference “Applied Mechanics”, Technical University of Liberec, pp 111–115
Szarek A, Stradomski G, Włodarski J (2012) The analysis of hip joint prosthesis head microstructure changes during variable stress state as a result of human motor activity. Mater Sci Forum 706–709:600–605
Tejszerska D, Wolański W, Larysz D, Gzik M, Sacha E (2011) Morphological analysis of the skull shape in craniosynostosis. Acta Bioeng Biomech 13(1):35–40
Wolański W, Larysz D, Gzik M, Kawlewska E (2013) Modeling and biomechanical analysis of craniosynostosis correction with the use of finite element method. Int J Numer Method Biomed Eng 29:916–925
Yasuda T, Hashimoto Y, Yokoi S, Toriwaki JI (1990) Computer system for craniofacial surgical planning based on CT images. IEEE Trans MedImaging 9:270–280
Materialise software & services for biomedical engineering: mimics software. http://biomedical.materialise.com/mimics. Accessed 13 March 2014
Materialise software & services for biomedical engineering: 3-matic software. http://biomedical.materialise.com/3-metic. Accessed 13 March 2014
ANSYS software. http://www.ansys.com/. Accessed 13 March 2014
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Wolański, W. et al. (2015). Preoperative Planning of Surgical Treatment with the Use of 3D Visualization and Finite Element Method. In: Tavares, J., Natal Jorge, R. (eds) Developments in Medical Image Processing and Computational Vision. Lecture Notes in Computational Vision and Biomechanics, vol 19. Springer, Cham. https://doi.org/10.1007/978-3-319-13407-9_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-13407-9_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-13406-2
Online ISBN: 978-3-319-13407-9
eBook Packages: EngineeringEngineering (R0)